EQUIPMENT&ELECTRICAL - 25268 ads

Thursday, May 23, 2024

TB640-C216T60-L3 professional night vision thermal binoculars integrate with uncooled thermal imager, visible camera, GPS, electronic compass, an eye-safe laser range finder. The night vision thermal binoculars can be used for target searching, locates the target's position, and take...

Wednesday, May 22, 2024

Duoyes Outdoor Fire Pit Table, as the key elements of Duoyes patio fire pit Sets, are specially created to allow you to enjoy a great dinner, even in a cold season, with your loved family, or host some best friends with nice coffee and drinks, in a private Garden, Backyard, Balcony or Porch...

Wednesday, May 22, 2024

Quantity : 1-1000PCS - Price : 500-10000￥

The cnt membrane will undergo a high single-walled carbon nanotube preparation process, which gives itself excellent and stable optoelectronic properties, better light transmittance, and better electrical conductivity. This carbon fiber membrane series is suitable for flexibility...

Wednesday, May 22, 2024

Quantity : 1-1000PCS - Price : 500-10000￥

Carbon nanotubes have good flexibility, excellent electrical and thermal conductivity, and are seamless, hollow tubes formed by graphene sheets formed by carbon atoms. Carbon nanotube sheet has the advantages of large flow rate, small linear expansion coefficient, good high and low-temperature...

Wednesday, May 22, 2024

Quantity : 1000tons - Price : 0.01-100 USD/PCS

Custom Round Car Magnets 3/4 inch x 3/4 inch N52 Super Strong Magnets for Sale This powerful neodymium disc magnet measures 3/4" in diameter, 3/4" in thickness, with the pull force of 37.86 lb vertically. It is made from an alloy of neodymium, iron and boron, plated with triple layers...

Wednesday, May 22, 2024

Quantity : 1000tons - Price : 0.01-100 USD/PCS

This powerful neodymium block magnet measures 1" in length, 1/2" in width, and 1/4" in thickness, with the pull force of 20.37 lb vertically. It is made from an alloy of neodymium, iron and boron, plated with triple layers of nickel-copper-nickel for effective corrosion protection...

Wednesday, May 22, 2024

Quantity : 1000tons - Price : 0.01-100 USD/PCS

This powerful neodymium block magnets measures 2/3" in length, 1/2"in width, and 1/4" in thickness, with the pull force of 15.95 lb vertically. It is made from an alloy of neodymium, iron and boron, plated with triple layers of nickel-copper-nickel for effective corrosion protection...

Wednesday, May 22, 2024

Quantity : 1000tons - Price : 0.01-100 USD/PCS

This powerful neodymium block magnet measures 3/4" in length, 1/4" in width, and 1/4" in thickness, with the pull force of 10.51 lb vertically. It is made from an alloy of neodymium, iron and boron, plated with triple layers of nickel-copper-nickel for effective corrosion protection...

Wednesday, May 22, 2024

Spare Parts Management Software Know everything about your spare parts with our software spare parts management! With EAMic® spare parts management system software, you can easily check suppliers' references, technical characteristics, consumption, storage box code, etc. You won't...

Wednesday, May 22, 2024

Quantity : 1000tons - Price : 0.01-100 USD/PCS

Strong Round Magnet N42 3/8 inch x1/2 inch Disc Magnet Strong Flat Magnets This powerful neodymium disc magnet measures 3/8" in diameter, 1/2" in thickness, with the pull force of 8.5lb vertically. It is made from an alloy of neodymium, iron and boron, plated with triple layers of...

Wednesday, May 22, 2024

Preventive maintenance is a very important part of equipment life cycle management. Using EAMic® preventive maintenance management software, maintenance team can always arrange the preventive maintenance work in advance, your assets will always receive the required maintenance care...

Wednesday, May 22, 2024

Maintenance is forever, this is the challenge for all manufacturing plants anytime anywhere. Using EAMic® CMMS manufacturing plant maintenance software is the way to mitigate the risk of equipment failure or breakdown, increase uptime, and obtain lifecycle profit for all your single...

Wednesday, May 22, 2024

Quantity : 1000tons - Price : 0.01-100 USD/PCS

This powerful neodymium disc magnet measures 3/8" in diameter, 1/2" in thickness, with the pull force of 10.52 lb vertically. It is made from an alloy of neodymium, iron and boron, plated with triple layers of nickel-copper-nickel for effective corrosion protection. The applications...

Wednesday, May 22, 2024

Industrial Equipment manufacturers are a crucial industry for the world, It is very diverse and comprises the manufacture of all mechanical machinery for use in mining, manufacturing, energy, and construction sectors. Regardless of the type of equipment, our goal is always the same...

Wednesday, May 22, 2024

Asset Lifecycle Management Software Equipment life cycle management of assets from investment planning, budget management, procurement, payment tracking, acceptance and capitalization, registration, repair and maintenance, equipment status tracking to end-of-life disposal. If you...

Wednesday, May 22, 2024

Quantity : 1000tons - Price : 0.01-100 USD/PCS

This powerful neodymium disc magnet measures 1/2" in diameter, 1/16" in thickness, with the pull force of 3.84lb vertically. It is made from an alloy of neodymium, iron and boron, plated with triple layers of nickel-copper-nickel for effective corrosion protection. The applications...

Wednesday, May 22, 2024

Reliability, Reliability, and Reliability. This is what all maintenance teams will focus on in the chemical plants, reliability can be easily obtained through EAMic® CMMS: System embedded failure analysis report, ultra red and vibration pen (equipment temperature and vibration data...)

Wednesday, May 22, 2024

The epidemic accelerated technological change into the era of Industry 4.0, and high-tech electronics industry manufacturers will be under continuous pressure to innovate and manage advanced production equipment in factories through smarter ways to further optimize maintenance management...

Wednesday, May 22, 2024

Quantity : 1000tons - Price : 0.01-100 USD/PCS

Round Magnet N42 1/2 inch x1/16 inch Industrial Magnets For Sale This powerful neodymium disc magnet measures 1/2" in diameter, 1/16" in thickness, with the pull force of 3.1lb vertically. It is made from an alloy of neodymium, iron and boron, plated with triple layers of nickel-copper-nickel...

Wednesday, May 22, 2024

Maintenance is crucial in the oil and gas industry, without proper maintenance, assets deteriorate over time, more importantly, it can also impact the safety of the asset or the people that operate it. Maintenance-related incidents that injure personnel, damage equipment, or harm...

Wednesday, May 22, 2024

Spare Parts Management Software Know everything about your spare parts with our maintenance parts inventory management software! With EAMic® spare parts management system software, you can easily check suppliers' references, technical characteristics, consumption, storage box code, etc...

Wednesday, May 22, 2024

Metal welding is a manufacturing process and technology to join metals or other thermoplastic materials such as plastics by heating, high temperature or high pressure. There are many types of custom metal welding. TIG(Tungsten Inert Gas), MIG (Metal, Inert Gas), GMAW (Gas, china metal welding)...

Wednesday, May 22, 2024

Stamping is a cold stamping process, which is to cut, bend or shape the material into the finished shape and size in accordance with the mold with the punching force from the stamping machine. As one of the leading China stamping metalworking manufacturers, Hunkmachining provides...

Wednesday, May 22, 2024

Metal deep drawing china refers to a kind of machining process in which a certain shape of flat blank obtained after blanking is stamped into various open hollow parts or the open hollow blank is reduced in diameter and increased in height by using a die. Thin wall parts with cylindrical...

Wednesday, May 22, 2024

Transducer Medical Device, Transducer Medical Equipment Wholesale & Bulk SCW medical transducers are made with imported chips for accurate manometry with an error of 2%. All parts of our transducer medical equipment are made of medical polymer materials. Complete supporting products...

Wednesday, May 22, 2024

Medical OEM Products As one of oem medical device companies , we have more than 20 years of experience in R&D and production of medical disposable products and can provide customers with a complete set of professional product design, R&D, registration, production and other services...

Wednesday, May 22, 2024

Drive in pallet racking is mainly composed of pillars, bracket beams, single and double brackets, top beams, rear beams, single and double side braces, large and small jacking, back pulling, guide rails, foot guards, etc. It is a high density storage racking system, which stores more...

Wednesday, May 22, 2024

Quantity : 1000pcs

HOTEC manual hand soap dispenser is leading in sanitation, and the manual soap dispensers comply with high standard and pursue high quality. Our manual hand soap dispenser is made out of durable material and comes in different kinds of shades, components, colors, materials and dimensions...

Wednesday, May 22, 2024

Quantity : 1000pcs

HOTEC has been contributing to high quality, efficiency, health, and cleanliness for years, providing a neat environment, especially during COVID-19. We have different types of soap dispensers and they vary in style, color, function, material, dimension, and component that meet people's needs...

Wednesday, May 22, 2024

Quantity : 1000pcs

For more convenient and to fit people's preference, HOTEC have produced many size of waste bins to fit many places and demand. They include 12 litre bin and 5 litre bin, and vary in shape, capacity, finish and function, available for all occasions, especially high traffic places like...