CEMENTING - 195 ads

Thursday, January 07, 2021

Saigao Circulating Swage is forged from high-grade steel materials and machined to the required specifications. After heat treatment and non-destructive testing, it is confirmed that the product is free of any defects. It can be connected to a square drill pipe to circulate mud, or...

Wednesday, December 30, 2020

Price : 30-800000

Fig 1502 Hammer Union Working Pressure: 15,000 psi(1034 bar) Features: Replaceable,lip-type seal provides primary seal,protects secondary metal-to-metal seal,and minimizes flow turbulence Butt-weld available Available for sour gas service: 10,000 psi (690 bar)cold working pressure...

Wednesday, December 30, 2020

Price : 30-800000

Fig 1002 Hammer Union Working Pressure: 10,000psi (690 bar) through 4-inch sizes; 7,500 psi (517bar), 5-and 6-inch sizes Features: Replaceable,lip-type seal provides primary seal,protects secondary metal-to-metal,and minimizes flow turbulence Butt-weld available Available for...

Tuesday, June 23, 2020

Quantity : 500000tons - Price : $5-$200000

The tie-back assembly is a special tie back cementing tool for tieback operation. Tieback equipment allows existing liners with a receptacle to be extended to the surface or farther up hole, and provides a high-pressure seal at the top of a cemented or uncemented liner. TIW offers...

Tuesday, June 23, 2020

Quantity : 500000tons - Price : $5-$200000

Mud Pump is also a popular concept of a wide range of pumps. Different regions, habits, and ultimately the pump type will not be the same. The mud pump described in this entry is a pump type in most sense: Applied mud pumps in the field of oil drilling. In fact, some non-clean water...

Tuesday, June 23, 2020

Quantity : 500000tons - Price : $5-$200000

LLF type reverse circulating junk basket is designed to remove all types of small junks such as bit cones, cutters and hand tools from the bottom of the wellbore. Working principle: Begin circulation of the junk basket to wash the hole. Stop circulation and drop the steel ball. When...

Tuesday, June 23, 2020

Quantity : 500000tons - Price : $5-$200000

The liner cementing is realized by the liner hanger, which reduces the casing weight of the first well in the deep well, improves the load of the rig lifting system when the casing is cut, and reduces the flow resistance of the cement slurry, which is beneficial to safe construction...

Tuesday, June 23, 2020

Quantity : 500000tons - Price : $5-$200000

Hydraulic Polished Bore Receptacle Liner Hanger Mated with tie-back assembly, it can tieback the liner to the top of well and act as efficiency sealing. The polished bore receptacle (PRB) is a highly machined component with a polished bore. Features of Hydraulic Liner Hanger Polished...

Tuesday, June 23, 2020

Quantity : 500000tons - Price : $5-$200000

BW series mud pump is widely used in mining, drilling, coal, railway, highway, water conservancy and hydropower, bridges, high-rise buildings, foundation reinforcement work. Advanced product design, reasonable structure, high pressure, flow,multi-file variable, energy-saving, light volume...

Tuesday, June 23, 2020

Quantity : 500000tons - Price : $5-$200000

The die collar fishing tool is the most widely used tool for overhauling oil and water wells. There are many varieties and specifications of fishing tools. According to the types of falling objects in the well, they can be divided into five categories: spear tools, overshot tools...

Tuesday, June 23, 2020

Quantity : 500000tons - Price : $5-$200000

The pump has features of advanced structure, small volume, reliable operation, easy maintenance. The cylinder is made of alloy steel forgings, and the three cylinders of each pump are interchangeable. The suction valve and discharge valve of F1300 and F1600 are interchangeable. In...

Tuesday, June 23, 2020

Quantity : 500000tons - Price : $5-$200000

Choke Manifold control and implementation of oil and gas pressure control technology. In case that the BOP is off, the pressure at the bottom of well shall be kept higher than formation pressure through controlling casing pressure with choke valve on-off. Additionally, soft shut...

Tuesday, June 23, 2020

Quantity : 500000tons - Price : $5-$200000

The plug body of cylindric plug valve is in cylindrical shape, which makes up of a sealing pair with the tapered hole surface of valve body. Cylindric plug valve is generally sealed in four ways, namely, sealant, valve plug expansion, O-ring, eccentric plug wedges into valve seat...

Saturday, May 23, 2020

Quantity : 5000 sets - Price : Depending on the pro

Looking for hammer union suppliers ? Hammer union connection we manufactured is used to connect kinds of manifold and lines. Hammer union 602 we manufactured is used to connect kinds of manifold and lines. It can be divided into three types: threaded connection hammer union, welded hammer union...

Tuesday, April 21, 2020

NEW VAM thread Anti-wear and anti-adhesion technology, through the selection of materials and the improvement of surface treatment technology, the problem of thread bonding has been basically solved. The casing is shackled three times and the oil pipe is shackled ten times without bonding...

Saturday, April 04, 2020

Quantity : 500000tons - Price : $5-$200000

The suck rod pumps can be sunk into wells in sequence as follows: barrel is run down to the setting depth on the tubing and then plunger with the standing valve on the rod string. For tubing of same diameter, tubing pumps are always of larger capacity than insert pumps. The tubing...

Saturday, April 04, 2020

Quantity : 500000tons - Price : $5-$200000

Non-rotating stabilizer(rubber sleeve stabilizer) is able to avoid blade wear and wall damage during. The non-rotating stabilizer consists of mandrel. Copper washer, rubber sleeve, spacer sleeve and self-locking lower sub. During drilling, the non-rotating stabilizer transfers the...

Saturday, April 04, 2020

Quantity : 500000tons - Price : $5-$200000

Mud pump parts are used on drilling rigs for the circulation of mud. These reciprocating pumps are suited for the process of drilling oil wells. We, at Saigao offer a wide selection of remanufactured, used and new drilling equipment for domestic and international drilling companies...

Saturday, April 04, 2020

Quantity : 500000tons - Price : $5-$200000

Key Seat wiper Sliding sleeve type key seat reamer consists upper sub, mandrel, lower sub, sliding sleeve and so on, as shown in diagram. The sliding sleeve could move upward or downward and rotate freely on the mandrel, there are several spiral hard alloy blades welded on the sliding sleeve...

Saturday, April 04, 2020

Quantity : 500000tons - Price : $5-$200000

Features of Polished Bore Receptacle Liner Hanger High quality surface finish on the inner seal bore for optimum sealing property. The top end is chamfered for easy entry. Manufactured to strict roundness and wall thickness tolerances, giving optimum burst and collapse pressure ratings...

Saturday, April 04, 2020

Quantity : 500000tons - Price : $5-$200000

BW1200/7 slurry pump is horizontal double cylinder reciprocating double action piston pump. The power has electric driving and diesel driving. It also can use hydraulic motor to drive. Customer can choose before ordering. It is applicable for 1500 meters water well drilling, core...

Wednesday, September 18, 2019

Quantity : 20GP - Price : 5USD

Description of Calcium aluminate cement Calcium aluminate cement, alumina cements or high alumina cements are obtained by the reaction at high temperature of lime (from limestone) and alumina (contained in natural minerals like bauxite). The product obtained after cooling is a hard mineral...

Wednesday, September 18, 2019

Quantity : 20GP - Price : 5USD

Description of Calcium aluminate cement Calcium aluminate cement, alumina cements or high alumina cements are obtained by the reaction at high temperature of lime (from limestone) and alumina (contained in natural minerals like bauxite). The product obtained after cooling is a hard mineral...

Tuesday, July 23, 2019

Description of Calcium aluminate cement Calcium aluminate cement, alumina cements or high alumina cements are obtained by the reaction at high temperature of lime (from limestone) and alumina (contained in natural minerals like bauxite). The product obtained after cooling is a hard mineral...

Sunday, March 24, 2019

Description of Calcium aluminate cement Calcium aluminate cement, alumina cements or high alumina cements are obtained by the reaction at high temperature of lime (from limestone) and alumina (contained in natural minerals like bauxite). The product provided by csa cement suppliers...

Tuesday, March 06, 2018

High pressure fluid control fitting are forged from high strength alloy steel for high-pressure discharge lines, water lines, temporary flow lines, well testing lines, cementing and circulating lines, and other high-pressure applications, in size 1", 2" and 3”, and available in pressure...

Tuesday, March 06, 2018

DMS Casing anchor can anchor the casing bottom and formation together in well bore. It can give the prestressing force to casings in well cementing operation after installing this device. This prestressing force can be kept after the solidification of cement, so that it can avoid...

Tuesday, March 06, 2018

Oil casing is used to support the oil, gas shaft wall of the pipe to ensure that the drilling process and after the completion of the normal operation of the entire well. Each well according to the different drilling depth and geological conditions, to use several layers of casing...

Sunday, August 28, 2016

Price : 10,00 €

We supply complete eps foam production line and turnkey project. We can upgrade the machines according to customers'requirements. Our company floor area 18000 square meters,Website: http://www.epsmachinefactory.com, has four big modern workshops.Ⅰ.Features of eps shape molding machine1...

Sunday, August 28, 2016

Price : 10,00 €

We supply complete eps foam production line and turnkey project. We can upgrade the machines according to customers'requirements. Our company floor area 18000 square meters,Website: http://www.epsmachinefactory.com, has four big modern workshops.Ⅰ.Features of eps shape molding machine1...