DEFLECTION - 203 ads

Wednesday, April 28, 2021

Micro Prisms, Rhomboid Prisms, Penta Prisms, PBS, Custom Coating Hyperion Optics supplies a range of prisms to meet UV-Visible-NIR applications, with high surface quality and tight tolerance angles. Our materials selection ranges from flint/crown glasses, fused silica, ZnSe, CaF2 etc...

Wednesday, December 16, 2020

Quantity : 1 - Price : 1 999,00 €

Tobee® G/GH Sand Gravel Pumps are designed specifically for continuous pumping of extremely aggressive slurries, gavels, and sands. with a wide particle size distribution. Capable of handling large particles at consistently high efficiencies results in low cost of ownership. The large...

Wednesday, December 16, 2020

Quantity : 1 - Price : 1 999,00 €

Tobee® AHR rubber lined slurry pumps are similar to AH metal lined slurry pump in structure. The main difference between AH and AHR is the material of wetted parts, which are natural rubber, synthetic rubber or other wear-resistant rubbers. AHR rubber lined slurry pumps are more suitable...

Saturday, September 26, 2020

Quantity : 30 - Price : 25 690,00 €

Wear Resistant WARMAN type Mining Slurry Pump ZIDONG ZH series horizontal centrifugal slurry pump is the machine transfer high hardness substance like slurry (slurry is the abrasive and corrosive medium mixed with water), ore slag, clay slag, iron slag, sand etc. usually used in the mining...

Saturday, September 26, 2020

Quantity : 20 - Price : 15 965,00 €

Wear Resistant Mining Slurry Pump,sand gravel pump ZIDONG ZH series horizontal centrifugal slurry pump is the machine transfer high hardness substance like slurry (slurry is the abrasive and corrosive medium mixed with water), ore slag, clay slag, iron slag, sand etc. usually used...

Monday, July 13, 2020

Farm Machine Parts series: Tiller Blades, Mower Blades, Disc Blades, S Tine Cultivator Parts, Gears etc. TEC GROUP INC. can supply the products for you according your drawing or samples. Produce equipment: melting furnace, centrifugal casting machines, coated sand casting machine...

Saturday, June 06, 2020

Quantity : 100000 squ - Price : 15-25 USD

- Overview - Honeycomb core introduction: Aluminum hexagonal honeycomb, with low density, 1/5 of the same thickness of the same board, 1/6 of the glass and 1/7 of the aluminum, can greatly reduce the construction load and cost. Because the middle interlayer contains a lot of air...

Tuesday, November 26, 2019

Quantity : 1pc - Price : US $1 - 3,000 / Set

To withstand high temperature, the metal seal must be used, but large leakage; For zero leakage, rubber seal must be used, but not high-temperature resistant. In order to overcome the contradiction of the double eccentric butterfly valve China , the was carried out. The structural...

Friday, September 27, 2019

Quantity : 1 - Price : 2000USD

Metallurgical Industry Rotary Kiln Product Overview This series of rotary kilns is a large-scale calcining kiln with advanced international level developed by the company together with Beijing Institute of Mining and Metallurgy, Changsha Institute of Mining and Metallurgy and Suzhou...

Thursday, September 19, 2019

Quantity : 1 - Price : Product: 1-100 yuan

The SMC cable bracket is a combination consisting of a cable bracket, a post and a fixed pin. The material of the column and the pin is also made by the high temperature pultrusion of the FRP composite. The column can be arbitrarily cut length according to the needs, the height...

Thursday, May 30, 2019

Overview Honeycomb core introduction: Aluminum hexagonal honeycomb, with low density, 1/5 of the same thickness of the same board, 1/6 of the glass and 1/7 of the aluminum, can greatly reduce the construction load and cost. Because the middle interlayer contains a lot of air, so it...

Thursday, December 06, 2018

The D type rubber fender is one of the most commonly used fenders on the market. It is suitable for wharf and ship side. We improved on the previous generation of D fenders, and rated, compression, deflection, reaction, force, energy, absorption all exceeded design standards so that...

Thursday, December 06, 2018

The D type rubber fender is one of the most commonly used fenders on the market. It is suitable for wharf and ship side. We improved on the previous generation of D fenders, and rated, compression, deflection, reaction, force, energy, absorption all exceeded design standards so that...

Thursday, August 09, 2018

Self Propelled Platform Description: We are professional Self propelled Platform 30-32M supplier and factory in China.We can produce the product according to your requirements. Telescopic boom lift 1.Greater lift capacity: The boom is made of high strength steel plate and has sufficient...

Thursday, August 09, 2018

Quantity : At least 1 - Price : At least 50 Dollars

Diesel Work Platform Description: We are professional Diesel Work Platform 28-29M supplier and factory in China.We can produce the product according to your requirements. Telescopic boom lift 1.Greater lift capacity: The boom is made of high strength steel plate and has sufficient...

Wednesday, May 30, 2018

Quantity : 20000 - Price : negotiable

Digital Portable Tension Meter LTTS-200/500/1k/2k/5k/10k/20k/50k Applications: The LTTS Digital Tension Meter is a hand-held device which accurately measures the running as well as statictensions of a wide variety of process materials including yarns, fibers, wires, optical fibe. Features...

Tuesday, May 15, 2018

- Conventional Press Brake Brochure: - - Conventional Press Brake Technical Data: - Conventional press brake products also are non-numerical control press brake, usually, we call it conventional machine. - Difference between Conventional Press Brake Products and Other Press Brake...

Thursday, May 10, 2018

11-type pressure gauge has a well-tested Bourdon tube measurement system. When pressurized, the deflection of the Bourdon tube is proportional to the incident pressure and is transmitted through the link to the transmission movement. The modular design allows multiple combinations...

Thursday, March 29, 2018

Quantity : 1 Piece/Pi - Price : US $1,000-3,000 / Pi

Item UV Flatbed Printer VT Cutting Machine VT Screen Printing VT Thickness mm 42.5/53.5 42.5/53.5 42.5 Suction Hole Diameter mm 0.8/1.0/1.2/1.5/2.0 0.8/1.0/1.2/1.5/2.0 0.8/1.0/1.2/1.5/2.0 Skin Thickness mm 2 2 2 Surface Treatment Hard Anodizing/PVDF N/A Hard...

Thursday, March 29, 2018

Quantity : 1 Piece/Pi - Price : US $1,000-3,000 / Pi

Item UV Flatbed Printer VT Cutting Machine VT Screen Printing VT Thickness mm 42.5/53.5 42.5/53.5 42.5 Suction Hole Diameter mm 0.8/1.0/1.2/1.5/2.0 0.8/1.0/1.2/1.5/2.0 0.8/1.0/1.2/1.5/2.0 Skin Thickness mm 2 2 2 Surface Treatment Hard Anodizing/PVDF N/A Hard...

Thursday, March 29, 2018

Quantity : 1 Piece/Pi - Price : US $1000 - 3000 / Pi

Item UV Flatbed Printer VT Cutting Machine VT Screen Printing VT Thickness mm 42.5/53.5 42.5/53.5 42.5 Suction Hole Diameter mm 0.8/1.0/1.2/1.5/2.0 0.8/1.0/1.2/1.5/2.0 0.8/1.0/1.2/1.5/2.0 Skin Thickness mm 2 2 2 Surface Treatment Hard Anodizing/PVDF N/A Hard...

Thursday, March 29, 2018

Quantity : 1 Piece/Pi - Price : US $1000 - 3000 / Pi

Item UV Flatbed Printer VT Cutting Machine VT Screen Printing VT Thickness mm 42.5/53.5 42.5/53.5 42.5 Suction Hole Diameter mm 0.8/1.0/1.2/1.5/2.0 0.8/1.0/1.2/1.5/2.0 0.8/1.0/1.2/1.5/2.0 Skin Thickness mm 2 2 2 Surface Treatment Hard Anodizing/PVDF N/A Hard...

Thursday, March 29, 2018

Quantity : 1 Piece/Pi - Price : US $1,000-3,000 / Pi

Item UV Flatbed Printer VT Cutting Machine VT Screen Printing VT Thickness mm 42.5/53.5 42.5/53.5 42.5 Suction Hole Diameter mm 0.8/1.0/1.2/1.5/2.0 0.8/1.0/1.2/1.5/2.0 0.8/1.0/1.2/1.5/2.0 Skin Thickness mm 2 2 2 Surface Treatment Hard Anodizing/PVDF N/A Hard...

Thursday, March 29, 2018

Quantity : 1 Piece/Pi - Price : US $1,000-3,000 / Pi

Item UV Flatbed Printer VT Cutting Machine VT Screen Printing VT Thickness mm 42.5/53.5 42.5/53.5 42.5 Suction Hole Diameter mm 0.8/1.0/1.2/1.5/2.0 0.8/1.0/1.2/1.5/2.0 0.8/1.0/1.2/1.5/2.0 Skin Thickness mm 2 2 2 Surface Treatment Hard Anodizing/PVDF N/A Hard...

Thursday, March 29, 2018

Quantity : 1 Piece/Pi - Price : US $1,000-3,000 / Pi

Item UV Flatbed Printer VT Cutting Machine VT Screen Printing VT Thickness mm 42.5/53.5 42.5/53.5 42.5 Suction Hole Diameter mm 0.8/1.0/1.2/1.5/2.0 0.8/1.0/1.2/1.5/2.0 0.8/1.0/1.2/1.5/2.0 Skin Thickness mm 2 2 2 Surface Treatment Hard Anodizing/PVDF N/A Hard...

Wednesday, February 07, 2018

The D fender is one of the most commonly used fenders on the market. It is suitable for wharf and ship side. We improved on the previous generation of D fenders, and rated, compression, deflection, reaction, force, energy, absorption all exceeded design standards so that they have...

Sunday, November 19, 2017

In the metal processing industry, it is often necessary to bend the metal plate to a certain Angle to make the next piece of work, the small bending machine plays such a role in many metal processing equipment. It is widely used in equipment manufacturing, mould manufacturing and...

Sunday, November 19, 2017

Conventional press brake products also are non-numerical control press brake, usually, we call it conventional machine. Difference between Conventional Press Brake Products and Other Press Brake: Generally speaking, the press brake is divided into conventional hydraulic plate press brake...

Friday, November 17, 2017

The Control Principle of CNC Synchro Press Brake : According to the program of the manipulator in CNC, the corresponding action of the oil cylinder is controlled by the instruction of CNC to the proportional amplifier and the amplifier control proportional valve movement. It is different...

Friday, November 17, 2017

The so-called stainless steel press brake is a press brake specially designed for folding stainless steel plates. For the processing of stainless steel plate, the length of the stainless steel plate is large, the strengthening precision is high, the working time is long, the demand...