PERFORMANCE SYS - 17438 ads

Friday, March 18, 2016

Quantity : 60t/Month - Price : USD8.52 / kilogram

Description of Two Parts Liquid Addition Cure Silicone Rubber for Food Grade Molds: Two Parts Liquid Addition Cure Silicone Rubber for Food Grade Molds is general called two-component room temperature vulcanization silicone rubber with excellent fluidity and good operational performance...

Thursday, March 17, 2016

Amorphous Calcium Aluminate Keywords amorphous calcium aluminate, non crystalline calcium aluminate, non crystallized calcium aluminate, amorphous C12A7, ACA, concrete accelerator, CAS No. 12042-68-1, cement addititve, shotcrete additive, concrete additives. trademark: hnkingway Description...

Thursday, March 17, 2016

Protection for low battery voltage、over load、output short circuit and over- temperature Restrain surge interference、eliminate noise、protection for thunder striking，provide the reliable power to the home appliances. SSP3117C solar energy inverters Key Features: 1. Pure sine wave output 2...

Thursday, March 17, 2016

Quantity : LT-2032 St - Price : LT-2032 Stainless St

Cixi Haizhiyuan International Trade Co., Ltd. located in the southern bank of hangzhou bay, cixi city, with Shanghai across the sea, by land distance of 160 km, 57 km from ningbo beilun port. Company since its inception, in the introduction, absorption, digestion domestic and...

Wednesday, March 16, 2016

Quantity : 1000000 - Price : USD75

Low noise emission Flocking surface to protect the corrugated board no marks NO weakening of the fabric Without touch of the clipper with the board, heating plates and the pressure loading system Safety and persistent Excellent running performance Location : No.298 North Zhonghua Street...

Tuesday, March 15, 2016

12v mppt solar charge controller Key Features: ■Adopt advanced MCU microprocessor control technology. ■12V/24V/48V self detect to choose output voltage. ■Advanced MPPT T echnology, High converting efficiency higher than 97% for minimizing energy loss. ■Capable to parallel in output...

Saturday, March 12, 2016

Quantity : 50sets/yea - Price : Negotiatable

Application The equipment structures of manganese ore briquette machine are similar to the coal briquette machine, dry powder briquette machine and other briquette machine. It can be used for pressing coal powder, iron powder, coking coal, aluminite powder, scrap iron, oxide-scale...

Saturday, March 12, 2016

Quantity : 50sets/yea - Price : Negotiatable

Introduction Coke powder briquette machine structured by electromotor, reducer, exposed gear, roller, engine base, engine shell, feeding device, shaft gearing assembly, pressure device, double discharge device, etc. Coke powder briquette machine is a type of equipment that press...

Saturday, March 12, 2016

Quantity : 50sets/yea - Price : Negotiatable

Introduction Mineral powder briquette machine can put the materials into machine directly after shatter, without water. Such as : aluminum powder, activated alumina, lime, the aim is to reduce dust, control capacity, improve recycling, increase the performance of transport. mineral...

Thursday, March 10, 2016

Introduction: ZRS-3H The Glow-wire Tester adopts high temperature coating spraying on steel structure, Glow wire tester is to test glow wire of lighting lamps, electronic products and household appliances, and UL 746A, IEC829, DIN695, VDE0471, the Glow wire tester ZRS-3H is suitable...

Thursday, March 10, 2016

Introduction: Automatic lighting surge generator (or Lighting surge immunity) SG61000-5 is used to assess the power cord and connect the internal switch stood in line to connect the internal switch to provide a common basis for switching the natural world and lightning caused by...

Thursday, March 10, 2016

Before The Curing Appearance White Paste Tack Free Time ≤10 (min) Extrudability 5~11 (g/s，25℃) Cure Time 3～7(d) After the curing Relative Density 1.40～1.45 (g/cm3) Tensile Strength ≥2.5 (MPa) Break Elongation ≥500 (%) Shear Strength ≥2.0 (MPa) Hardness 45～55 (Shore...)

Thursday, March 10, 2016

Before The Curing Appearance White Paste Tack Free Time ≤10 (min) Extrudability 5~11 (g/s，25℃) Cure Time 3～7(d) After the curing Relative Density 1.40～1.45 (g/cm3) Tensile Strength ≥2.5 (MPa) Break Elongation ≥500 (%) Shear Strength ≥2.0 (MPa) Hardness 45～55 (Shore...)

Thursday, March 10, 2016

Before The Curing Appearance White Paste Tack Free Time ≤10 (min) Extrudability 5~11 (g/s，25℃) Cure Time 3～7(d) After the curing Relative Density 1.40～1.45 (g/cm3) Tensile Strength ≥2.5 (MPa) Break Elongation ≥500 (%) Shear Strength ≥2.0 (MPa) Hardness 45～55 (Shore...)

Thursday, March 10, 2016

Features of Cone Fenders Cone rubber fender is the 3rd generation of cell rubber fender, the structure more reasonable, deflection can reach 70%,the equal specification fender energy absorb raise one more times, long life using. It can reduce the cost of the dock project. While...

Thursday, March 10, 2016

TLT-AA Super Cell Fender Super Cell fenders are fitted with fender panels to obtain a wide contact area on contact with the vessel, thus reducing pressure against the vessel hull as much as required. Features of Super cell fenders: High energy absorption with relatively low reaction force...

Thursday, March 10, 2016

Quantity : 1 - Price : 3 600,00 €

As the professional perfect binding machine manufacture, Qingdao Knady (Binding) Industry Co., Ltd have more than 20years experience, our mother company are in Korea, we are branch factory in China, and all our technology are from Korea, and the key accessories are made in Korea too...

Wednesday, March 09, 2016

4 inch printing width 150mm/s barcode labeling RP400 thermal transfer printer thermal transfer printer Exquisite appearance High speed, good stability, durable performance Transmission-typed paper detection with excellent accuracy and high speed. Multi-functional interfaces with parallel...

Wednesday, March 09, 2016

OBTH800 Book Sewing & Folding Machine Features: 1. Binding notebooks, exercise books, student writing book, account book, pass port, manual, hard cover book, sewing book etc by threading. 2. Ideal choice for mess production, better than saddle stitching machine.. 3. Can thread...

Tuesday, March 08, 2016

ZLYJ series gearbox is a high accuracy and hardened tooth surface transmission device, which is designed for single screw extruder with thrust block. The design of gearbox adopt JB/T9050.1-1999. Main features: 1.The material of gear is high strength alloy steel through gear grinding...

Tuesday, March 08, 2016

Planetary screw barrel/ Planetary screw and barrel for plastic extrusion Specification: Diameter: Ø15-Ø500 L/D ratio: 5: 1 We can manufacture all types of screws and barrels according to clients' requirement. Base Materials: 1)38CrMoAlA(JIS SACM 645) 2)42CrMo(AISI 4140) ...

Tuesday, March 08, 2016

* Introduction for vortex flowmeter No moving parts, long term stability, simple structure and convenient installation and ma intenance.The anti disturbance circuit and anti vibration sensing head, has a certain anti vibratio n performance. Using ultra low power single chip microcomputer...

Tuesday, March 08, 2016

* Introduction for vortex flowmeter No moving parts, long term stability, simple structure and convenient installation and ma intenance.The anti disturbance circuit and anti vibration sensing head, has a certain anti vibratio n performance. Using ultra low power single chip microcomputer...

Tuesday, March 08, 2016

* Introduction for vortex flowmeter No moving parts, long term stability, simple structure and convenient installation and ma intenance.The anti disturbance circuit and anti vibration sensing head, has a certain anti vibratio n performance. Using ultra low power single chip microcomputer...

Monday, March 07, 2016

Quantity : 60T/MONTH - Price : 8.2 USD/KG FOB HUANG

1.description Platinum Cure Molding Silicone is a two parts kinds liquid silicone, which can cured on room temperature. which mainly used for mold making of concrete, stone , jewelry casting,, tire molding ,rapid protyping , vacuum foaming, any condensation silicone can used for...

Sunday, March 06, 2016

Specifications: 1,Automatic making bag,weighting,filling ,sealing,counting and batching number 2,Model number: JD-Y30 3,Warranty: 2years Company Profile: Guangzhou Jiade Packaging Equipment Co.,Ltd is a manuaturer which was loaded in Guangzhou,China.We b elieve: "Honesty is...

Saturday, March 05, 2016

Quantity : MOQ 1000 M - Price : 0.1-3USD

Features and Benefits: 1.Light weight,durable,resistance to acid and alkali,aging resistant,corrosion resistant. 2.High tensile strength and bending properties,which make it go through narrow easily. 3.Perfect temperature adaptability,the product will not soften in hot weather...

Saturday, March 05, 2016

Quantity : MOQ 1000 M - Price : 0.1-3USD

Duct rodder are composed of fiber glass rod which is extruded by fiber glass and high strength resin at high temperature. This type of rod has high tensile strength and flexibility. It was covered by a high density polyethylene engineering plastic as its protect layer,which make...

Saturday, March 05, 2016

Quantity : MOQ 1000 M - Price : 0.1-3 usd

Duct rodder are composed of fiber glass rod which is extruded by fiber glass and high strength resin at high temperature. This type of rod has high tensile strength and flexibility. It was covered by a high density polyethylene engineering plastic as its protect layer,which make...

Saturday, March 05, 2016

Quantity : MOQ 1000 m - Price : 0.1-3USD

Duct rodder are composed of fiber glass rod which is extruded by fiber glass and high strength resin at high temperature. This type of rod has high tensile strength and flexibility. It was covered by a high density polyethylene engineering plastic as its protect layer,which make...