PARTS PROCESSING - 29887 ads

Thursday, June 30, 2022

Quantity : 30set/Mont - Price : 1000USD-40000USD

X4 sonar pipe inspection System is mainly used for the detection of water-carrying (full water or above 2/3 of the water level), inspection wells or underground cavities. It automatically analyzes and extracts the inner wall contour, establishes a three-dimensional model, and performs...

Thursday, June 30, 2022

Price : 1000-6000USD

X-Ray Manual SMD Reel Counter Microfocus X-ray inspection is widely used in LED/automobile/aerospace/EMS etc field and become a necessity for modern PCBA inspection. The x ray smd component counter machines produced by Seamark have the characteristics of high performance, cost-effectiveness...

Thursday, June 30, 2022

Quantity : 30set/Mont - Price : 1000USD-40000USD

X1-H4 pipeline periscope is mainly used for rapid detection and diagnosis of the internal conditions of industrial vessels or pipelines. Put the camera probe with its own searchlight light source into the pipe mouth or the inside of the industrial container through the operating lever...

Thursday, June 30, 2022

Quantity : 30set/Mont - Price : 1000USD-40000USD

The X120-D UV Spot Repair System is mainly used for the repair of point defects in drainage . According to different pipe diameters, the corresponding airbags are selected to accurately repair the damaged points. It is mainly composed of a main control system and an airbag. Its main...

Thursday, June 30, 2022

Food Additives Used in Milk Products Dairy system is a complex colloidal dispersion system, the dispersion medium is water, and the dispersions are lactose, inorganic salts, protein, fat, gas, etc. It is an unstable system. Dairy products are both highly nutritious and highly unstable...

Thursday, June 30, 2022

Price : 100USD

Finished steel products, also known as steel made products, refer to a series of products further processed from steel, including flanges, pipe fittings, valves, steel wires, steel strands, steel gratings, etc. Taking forged steel flanges as an example, they are further produced from...

Thursday, June 30, 2022

Price : 100USD

OVERVIEW OF COLD ROLLED STEEL COIL Cold rolled carbon steel coil is a type of steel that has been passed through a rolling mill below its recrystallization temperature from 400℃ to 700℃. Recrystallization of steel is a microstructural phenomenon that is achieved by heating on the...

Thursday, June 30, 2022

Price : 100USD

In essence, china cold rolled steel sheet can be regarded as hot rolled steel that has undergone further processing. The hot rolled steel is further processed in cold reduction mills, where the hot rolled steel gets cooled down at room temperature, followed by a series of annealing...

Thursday, June 30, 2022

Quantity : 500000 Pie - Price : US $1 - 3,000 / Set

Festures of Backflow Preventers The double check valve is designed as a whole, with small structure； Body is streamlined with little resistance loss； Combination of a double check valve and safety drain valve can completely prevent backflow pollution under any working condition； All...

Thursday, June 30, 2022

Quantity : 3500+/year - Price : USD25,000-USD1,100,0

When the drum runs at a full speed driven by the main motor and transmission belt, the suspension of HR pistons pusher type centrifuge will be led to the product distributing plate through the feeding pipeline continuously. Then the suspension will be distributed evenly on the filter...

Thursday, June 30, 2022

Quantity : 3500+/year - Price : USD25,000-USD1,100,0

SAIDELI-INDUSTRIAL CENTRIFUGE SEPARATOR MACHINE MANUFACTURER Jiangsu Saideli, one of industrial centrifugal separator manufacturers, continuously develops high-tech and top-quality products which include industrial centrifuge separators, industrial centrifugal dryer, and industrial filter...

Thursday, June 30, 2022

Quantity : 3500+/year - Price : USD25,000-USD1,100,0

INDUSTRIAL CENTRIFUGE SEPARATOR WORKING PRINCIPLE The centrifugal separator working principle is fed tangentially to the cylindrical top of the centrifugal separator to produce rotation. Through the slot in the air inlet chamber, the flow rate in industrial centrifuge is further accelerated...

Thursday, June 30, 2022

Description of Gear Operated Gate Valve: ZECO gear operated gate valve is defined according to the driving mode. Gear operated gate valve is mainly used for large-diameter gate valve. Because of the large torque, it is almost impossible to open the valve by manual operation. ZECO...

Thursday, June 30, 2022

Description of Gear Operated Valve: Large size ball valve if adopt manual operation will reduce the efficiency of personnel, even if many people help may also be because of the large size of excessive torque can't open or close the valve, so the large-diameter ball valve ZECO basically...

Thursday, June 30, 2022

ZECO forged steel gate valve china refers to the blank of valve, which is a forging piece with certain mechanical properties, shape and size produced by applying pressure on the metal blank by forging and pressing machinery, and then processed by ZECO manufacturing department on each...

Thursday, June 30, 2022

Description of Floating Ball Valve: ZECO floating ball valve china has two seats supporting the ball Under medium pressure, the ball can be pressed tightly to the sealing surface for sealing at the outlet end.ZEC0 fioating ball valve is suitable for the condition of temperature from...

Wednesday, June 29, 2022

Quantity : 1 PC - Price : 10000USD

Low Consistency Cleaner Application: HT series low consistency cleaner is suitable for cleaning fiber suspen- sion with the consistency of 0.4-1.2%. It can efficiently remove light impurities, hot melt impurities, heavy impurities, pulp rejects etc. In addition, it can also remove foam plastics...

Wednesday, June 29, 2022

Quantity : 1 PC - Price : 10000USD

High Consistency Cleaner Description: High Consistency Cleaner can eliminate heavy impurities larger than 3mm in diameter from recycled paper stock. As a coarse screening equipment,it is usually a down- stream equipment of hydrapulper. It can also be installed as an important equipment...

Wednesday, June 29, 2022

Quantity : 1 PC - Price : 1000USD

Description： Fan pumps are used to pump paper pulp, water, sewage, or other liquid media. Used for transporting the paper pulp concentration ≤1% in medium-high speed paper making machine for supplying pulp system. This one set includes pump, underframe for placing pump and standard motor...

Wednesday, June 29, 2022

Price : 100USD

CNC precision machining china is directly changing the size, shape, mutual position, surface roughness or properties of raw materials or semi-finished products to make them into finished products. Including: casting, welding, electroplating, heat treatment, machining and assembly processes...

Wednesday, June 29, 2022

Price : 100USD

1.Overview of auto starter motor parts What is auto starter?Engine starting needs external support, the car starter is playing this role. Generally speaking, the starter use three parts to realize the whole starting process. The DC motor introduces the current from the battery and...

Wednesday, June 29, 2022

Price : 100USD

Aluminum Automotive Components Overview Aluminum is a key item used in the production of automotive aluminum parts and assemblies. EMP Die Casting is a leading provider of custom aluminum die cast components for the automotive aluminum parts market. As one of automotive aluminum suppliers...

Wednesday, June 29, 2022

Price : 100USD

Aluminum Die Valve Casting Parts Product Details: 1. Specification: Custom-made 2. Service: OEM/ODM Service 3. Material: Aluminum alloy 4. Application: Automobile,Truck,EV car,machinery 5. Die Casting Machine Type: Cold Chamber Die Casting Machine 6. Quality Control System: IATF16949, ISO9001...

Wednesday, June 29, 2022

Prototype molds are rapid processing for the molds. It's totally different from production molds as they can't be used in the long term. As a professional mold maker for over 15 years,Packson can handle all kinds of mold including prototypes. We bring not only high skilled engineering...

Wednesday, June 29, 2022

Quantity : 1200sets/y - Price : USD10000-200000

ADI300 CNC EDM Machine With Manual Working Table Rise And Fall ADI450 CNC EDM Machine With High Performance For Hard Alloy ADI500 CNC EDM Machine For Automobile Injection Molds ADI600 CNC EDM Machine With Five Axis Control For Aerospace ADI800 CNC EDM Machine With Big Molds ADI1000...

Wednesday, June 29, 2022

Model: YCTL-080 YCTL-150 YCTL-225 YCTL-408 YCTL-800 YCTL-1000 Product Performance Temperature range: 0℃/-20℃/-40℃/-70℃ ~ +150 Pressure range: RP~ 0.5Kpa Temperature fluctuation: +/- 0.5℃(normal pressure) Temperature uniformity: +/- 2℃(normal pressure) Description of High Altitude...

Wednesday, June 29, 2022

Model: YPO-072 Product Performance Temperature range: RT+25℃～200℃/300℃ Temperature fluctuation: ±0.3℃ Temperature uniformity: ± 1％℃(200℃)/±2％℃(300℃) Description of Desktop High Temperature Oven The desktop hot air oven temperature controller, a kind of digital hot air oven used on desktop...

Wednesday, June 29, 2022

Model: YNO-100-4 Product Performance Volume: 100L*4 Inner size: 50*45*45(w*h*d) Temperature range: RT+25℃～200℃/300℃/400℃ Temperature fluctuation: ±0.3℃ Temperature uniformity: ±2％℃ Description of Customized 4 Doors Type Nitrogen Oven The nitrogen oven is a new type of anaerobic...

Wednesday, June 29, 2022

Coating Parts High Temperature Drying Oven Model: YPO-3155-120 Product Performance Temperature range: RT+25℃～120℃ Temperature fluctuation: ±0.3℃ Temperature uniformity: ±1％℃ Heat-up time: 15 min Description of Coating Parts High Temperature Drying Oven Precision ovens can provide...

Wednesday, June 29, 2022

Quantity : 500000PCS/ - Price : 2000$

Disposable pe gloves are new products developed by Soton this year, which are perfect for housework, food processing, kitchen cooking, barbecue catering, personal care, etc. Among our eco friendly disposable gloves, different thicknesses can be customized according to customer requests...