PLATE|STAINLESS - 16598 ads

Wednesday, October 18, 2017

Specification. Pressure Rating: 1.6-16.0Mpa Specification: DN15-50 Material: cast steel Standard flanges: DIN, ANSI, JIS, JB79 Structural characteristics: 1.Automatic blowoff mechanism is installed inside the valve. It is a new-type crown valve plate with reliable sealing,and steam...

Wednesday, October 18, 2017

Brief Introduction. Inverted bucket type steam trap,as a mechanical steam trap, has outstanding performance and can be used low ,medium and high pressure. Working Principle The design makes use of the working principle of difference in density of steam and condensate. The compound...

Wednesday, October 18, 2017

Brief Introduction. TD42 Steam Trap is a kind of thermodynamic steam trap which is mainly used for the environment with low condensate back pressure and low capacity requirement, similar to Spirax Sarco Design. Structural Characteristic. 1.Assembled with steam or air heat preservation...

Wednesday, October 18, 2017

Brief Introduction. FT43 Ball Float Steam Trap, similar to Spirax Sarco Design, mainly used for steam system to drain condensate water. Structural characteristic : 1.The valve adopts two kinds of sealing,e,g,balance double valve seat and single valve seat with reliable closedown and long life...

Wednesday, October 18, 2017

- Brief Introduction. - FT14 Ball Float Steam Trap, similar to Spirax Sarco Design, mainly used for steam system to drain condensate water, Structural characteristic : 1.The valve adopts two kinds of sealing,e,g,balance double valve seat and single valve seat with reliable closedown...

Wednesday, October 18, 2017

Introduction Impulse safety valve is used for power plant boilers, pressure containers, pressure and temperature reducing device and other facilities. It serves to prevent the pressure exceeding the highest allowable pressure value and ensure the safety of the device when working...

Wednesday, October 18, 2017

Brief Introduction. Y14H/F Direct Acting Bellows Pressure Reducing Valve is newly improved product based on MIYAWAKI. This Direct Acting Bellows Pressure Reducing Valve material is Stainless steel, which can be used for some corrosive medium, it can also be used for Air, Steam, etc...

Tuesday, October 17, 2017

C5126E Single Column Vertical Lathes 1.The super-high quality and mass remarkably surpass the domestic first-class factories. 2.The beam guide and ram guide are handled by supersonic frequency induction hardening (HRC≥50) while the sliding surface of guide is treated with sticking...

Tuesday, October 17, 2017

C5123E Single Column Vertical Lathes china 1.The super-high quality and mass remarkably surpass the domestic first-class factories. 2.The beam guide and ram guide are handled by supersonic frequency induction hardening (HRC≥50) while the sliding surface of guide is treated with sticking...

Tuesday, October 17, 2017

C5120E Single Column Vertical Lathe china 1.The super-high quality and mass remarkably surpass the domestic first-class factories. 2.The beam guide and ram guide are handled by supersonic frequency induction hardening (HRC≥50) while the sliding surface of guide is treated with sticking...

Tuesday, October 17, 2017

C5116E Single Column Vertical Lathe , the picture is the product exported to the USA. 1.The super-high quality and mass remarkably surpass the domestic first-class factories. 2.The beam guide and ram guide are handled by supersonic frequency induction hardening (HRC≥50) while the...

Tuesday, October 17, 2017

C5112E Single Column Vertical Lathe 1.The super-high quality and mass remarkably surpass the domestic first-class factories. 2.The beam guide and ram guide are handled by supersonic frequency induction hardening (HRC≥50) while the sliding surface of guide is treated with sticking...

Tuesday, October 17, 2017

Quantity : MOQ 500

TSKY's sheet-metal products factory is located in Jiaozhou, Qingdao, as one of manufacturing base of TSKY Railway. Sheet-metal products are produced for both local China and international market, obtains EN15085 certificate and ISO9001 to ensure the quality. Strict quality control...

Tuesday, October 17, 2017

Application: Fabric surface waterproof performance tester to determine the resistance of any fabrics, which may or may not have been given a water-repellent finish, to surface wetting by water. It is not intended to predict waterproofness, since it does not measure the of water through fabric...

Tuesday, October 17, 2017

Fabric anti-drilling velvet tester Mainly used in the production of down products and fabric of the anti-drilling velvet test, used to assess a variety of fabrics to prevent drilling or feathers from the joints between the drilling performance. Meet the standard: GB / T 12705 The main parameters...

Tuesday, October 17, 2017

The bending performance of the fabric is an important physical parameter that we study the properties of fabric, such as crisp, drape, and softness. The instrument uses bending length (also known as overhanging stiffness) and bending stiffness (also called bending stiffness) Mechanical...

Tuesday, October 17, 2017

Used to detect the production of accurate fiber cross-section of the sample material, in order to facilitate the fiber cross-section under the microscope for further testing or research. The main purpose: The Precision Hastelloy slicer is used to detect the sample material that...

Tuesday, October 17, 2017

Absorbent properties tester can be used for medical, sanitary nonwovens water absorption and water absorption of the determination of the instrument kits to meet a variety of different standards. Standards compliant: Edana 10.3-99, ISO 9073-6, IST 10.1 (95) Scope of application...

Tuesday, October 17, 2017

Fabric anti-electromagnetic radiation performance tester is mainly used for textile, plastic sheet, sheet metal, non-conductive material surface coating or coating, metal mesh, conductive film, conductive glass, conductive medium plate electromagnetic shielding materials such as...

Tuesday, October 17, 2017

Introduction UL94 horizontal and vertical combustion tester is designed to simulate the early firing situation of electronic and electrical products in order to evaluate the firing hazard through this simulation technology,. when the products are on fire the tester needs to ensure...

Tuesday, October 17, 2017

Introdution: Elmendorf Tearing Tester takes the Elmendorf method and is used to determinate tearing resistance property of films, sheets, flexible PVC, PVDC, waterproof films, woven materials, polypropylene, polyester, paper, cardboard, textile and non-woven etc. The weight is configurable...

Saturday, October 14, 2017

Quantity : 100 - Price : US $0.6 / Piece

Product name: Large Size 36" Stainless Steel Pipe Fitting Cap 　　Connection: Welding 　　Material: Carbon Steel 　　Certification: ISO, API, ANSI, DIN, JIS, ASME, GB, BS, SH, HG, CE, BV, CCS 　　Application: Petroleum 　　Warranty Time: 12months 　　MOQ: 1PC 　　Transport Package: Plywood Case...

Friday, October 13, 2017

Quantity : 8 Tons - Price : US $2,600 - 4,000 /

FOB Price: US $2,600 - 4,000 / Metric Ton Min.Order Quantity: 8 Metric Ton/Metric Tons Supply Ability: 2000 Metric Ton/Metric Tons per Month 5 Bar Patten Aluminium Checker Plate Port: Tianjin/Qingdao Port Payment Terms: L/C,T/T Quick Details Grade: 1000 Series Temper...

Friday, October 13, 2017

Quantity : 10000 - Price : US $2 / Piece

　ASME B16.5 Stainless Steel Weld Neck Forged Flange 　　ASME B16.5 Stainless Steel Weld Neck Forged Flange can be differentiated from all other types of flange by their long tapered hub. In addition, there is also a gentle transition of thickness in the region of the butt weld that...

Thursday, October 12, 2017

2018 Guangzhou Int'l Sanitary Ware Fair (GSW 2018) Date: May 15th-17th, 2018 Venue: Poly World Trade Center Expo Add: No. 1000, Xingang Dong Road, Haizhu District, Guangzhou, China Website: http://www.gswfair.com/index.php?lang=en China, a Major Exporter of Smart Toilets According...

Wednesday, October 11, 2017

Quantity : 10 Pieces - Price : US $ 1.0-10000.0 / P

　　Product name: Stainless Steel 304L Butt Weld Pipe Fittings cap 　　Model NO.: KT0360 　　Material: Stainless Steel 　　Surface Treatment: Pickling 　　Trademark: Shengtian 　　Specification: ANSI ASME 　　Standard: DIN, ANSI, GB, JIS 　　Connection: Smls 　　Head Type: Round 　　Transport Package...

Tuesday, October 10, 2017

Quantity : 50000 - Price : US$16.9-100/sheet

- Quick Details - - CNC Machining or Not: CNC Machining - Type: Drilling, Milling - Material Capabilities: Other - Micro Machining or Not: Micro Machining - Place of Origin: Guangdong, China (Mainland) - Model Number: XC-3K-CNC - Brand Name: XC - Product name: Carbon fiber...

Tuesday, October 10, 2017

Quantity : 50000 - Price : US$5-200/sheets

- Quick Details - - CNC Machining or Not: CNC Machining - Type: Drilling, Milling - Material Capabilities: carbon fiber plate - Micro Machining or Not: Micro Machining - Place of Origin: Guangdong, China (Mainland) - Model Number: XC-CNC-C - Brand Name: XC - Product name:...

Tuesday, October 10, 2017

Quantity : 50000 - Price : US$20-50/pieces

- Quick Details - - Place of Origin: Guangdong, China (Mainland) - Brand Name: XC - Model Number: XC-3KTM-221 - Application: RC Model copters ,Drone - Shape: carbon fiber strip - Dimensions: customized request - Product Type: Carbon Fiber - C Content (%): 100% - Working Temperature...

Tuesday, October 10, 2017

Application: Thermal Radiation Droplet Tester, to determine the resistance to the thermal radiation through up a radiant heat source placed on the top of the sample to generate gas combustion, droplet, fiber combustion, etc. thus the fire safety of automotive interior materials is determined...