OIL& - 11417 ads

Friday, September 15, 2017

Quantity : 24 tons - Price : $450/MT

-Specific Density (At 20° C): Range 0,915 – 0,923 typical 0,921 -Refractive Index (At 40° C): 1,474 – 1,476 - Acidity Mg KOH % Gm Oil Max Range: 1,0 -2,0 Typical 1,6 -Peroxide Value Mmol/Kg Oil : Max 7,5 -Color Value Iodine Mg: Max 15 -Iodine Value (WIJS): 127 -Moisture & Volatile %...

Friday, September 15, 2017

Large capacity PET bottle blow molding machine using a special preheating system and drive system, compared to other manufacturers of similar models of energy saving in more than 50%. Widely used in edible oil, water and other PET bottles packaging. Features: 1.Large capacity PET...

Friday, September 15, 2017

Application: For the recovery of a variety of waste black internal combustion engine oil, engine oil, the factory process oil, and other oil system replaced with a variety of lubricants,also deal with other mineral waste oil. Technical features: 1.After purification by the system...

Friday, September 15, 2017

Application This machine is applied to recover and purify various high-precision lubricating oil such as hydraulic oil, mechanical oil, coolant oil, gear oil, heat treatment oil, industrial oil, mineral oil and so on. The purifier can fast degas, dewater, and remove the impurity and...

Friday, September 15, 2017

Application This purifier integrates fine filter, high efficiency demulsification and dehydration into one body. This machine, which can remove large of water without heating, creates the fastest dehydration. speed in domestic at present. This machine can quickly separate water from the oil...

Friday, September 15, 2017

Application The machine is special for treating the used and old transformer oil, mutual oil, switch oil. Comparing with the single stage type, this machine adopts the double stages vacuum system, which can improve the machine working vacuum value highly, so it can remove the water...

Friday, September 15, 2017

Application The machine is special for treating the used and old transformer oil, mutual oil, switch oil. Comparing with the single stage type, this machine adopts the double stages vacuum system, which can improve the machine working vacuum value highly, so it can remove the water...

Friday, September 15, 2017

Quantity : 17 - Price : 1 400,00 €

Products Specification： Property Test Method and Unit Specification Range Softening Point Ring&Ball,°C 90-140 Color Gardner,50%Toluene Solution 3-12 Acid Value mgKOH/g 0.5 max Ash Content wt.% 0.5 max Applications: A. 59C Series Copolymerized hydrocarbon Resins...

Thursday, September 14, 2017

Description 1. The WC67K NC Hydraulic Press Brake-E21 design meets EU international standards. The fuselage eliminates internal stress by annealing and ensures higher precision and strength. All NC hydraulic plate bending machines are designed using SOLID WORKS 3D programming and...

Thursday, September 14, 2017

- Description - Description 1. The design of the guillotine shearing machine and cutter machine conforms to EU international standards. 2. The fuselage eliminates internal stress by annealing and vibration, ensuring high strength and precision. 3. Using SOLID WORKS 3D programming...

Thursday, September 14, 2017

Description 1. This CNC hydraulic metal sheet press bender machine compliance with EU standards. The frame of this bender machine eliminates internal stress by annealing and ensures high precision and strength.All products are designed using SOLID WORKS 3D programming and made with...

Thursday, September 14, 2017

Description STANDARD EQUIPMENT 1. ESTUN E21S NC controller system. 2. Linear guide rail and ball screw accuracy of 0.01mm(HIWIN,TAIWAN). 3. Steel mono-block construction. 4. DELTA frequency converter 5. Standard electrics from Schneider, France. 6. Standard oil tube connectors from EMB Germany...

Thursday, September 14, 2017

- Description - cnc Hydraulic Press Brake machine belong to the universal machine tools, mainly used for metal sheet and plate bending, by both sides is two pieces of C type steel plate and work table with horizontal beam assembly into a three-dimensional structure. The slider suspension...

Thursday, September 14, 2017

RCA Tape abrasion test machine Tape abrasion test machine make wear test of various surface coating consumption test with mobile phone, PDA, MP3, CD and laptop, the load 275g, 175g.55g. Scroll uncoated paper or tape friction with the sample oil after the determination of the effect...

Tuesday, September 12, 2017

Standards: ASTM D3514/D3885/D3886, AATCC 119/120, FTMS 191/5300/5302, FORD EFB 15J2/BN 112-01 Applications: The instrument can conduct flat grinding, curved grinding, edge grinding, fold grinding and abrasion test such as frosting resistance, welt, gigging, which is used for the woven fabric...

Tuesday, September 12, 2017

Rapid Grease Extraction Apparatus Testing Standards of Rapid Grease Extraction Apparatus: Edana method ERT 155 Applications: Rapid Grease Extraction Apparatus is designed to determine the grease or finish content of wool or synthetic samples by solvent percolation and evaporation...

Monday, September 11, 2017

Quantity : 1

With our Portable Line Boring and Overlay Welding machine tool STD 400 it is possible to make line boring and overlay welding operations from 42 mm up to 400 mm of diameter, equipped with the standard equipment. Our C40 DUAL SYSTEM STD 400 is the best-selling version of our gamma...

Thursday, September 07, 2017

Quantity : 30 - Price : 500000USD

Item No.: SH280/400/600/800/1000/1200 Capacity: 100/250/500/750/1000/1250kg/hr Certificate: ISO,CE,BV,SGS 》Function: It is used to produce all kinds of hard biscuit, soft biscuit and soda biscuit. 》General Introduction: SH Series Biscuit Production line is the primary choice for...

Wednesday, September 06, 2017

Digital Autoburst Strength Tester Standards: ASTM D3786, ERT 80-4-20, GB/T 7742.1, BS EN ISO 13938-1, BS 3424-6-B, ISO 3303-B, ISO 2758, ISO 3303.2, ISO 3689, JIS L1018/L1093, IWS TM170 Applications: Digital Autoburst Strength Tester is used to determine the bursting strength and...

Tuesday, September 05, 2017

SUNFLOWER OIL to export product of Tunisia marketing@fgt-trading.com Location : sousse, 4000 sousse, Contact : RAHMA BEN KHALED, +21 6 20 52 88 25

Tuesday, September 05, 2017

Introduction Change the boiler pipe to special pipe with magnetic force. The fuel molecules are refined so that the specific surface area of the fuel increases and promotes complete combustion. As the nature of the fuel changes, the combustion efficiency increases, so a small amount...

Tuesday, September 05, 2017

Introduction： Multi Finger Scratch/Mar Tester uses tungsten carbide as a scratch to accurately detect surface damage caused by unconventional physical forms (such as scraping, grasping, planning etc). It can be used to detect the wear resistance of plastic parts in automobile interior...

Tuesday, September 05, 2017

Brief Introduction： The fogging tester used to test the properties under certain environmental conditions for leather and fabric fogging phenomenon, for the automotive, aircraft and other interior materials fogging performance at high temperatures volatile components of its evaluation...

Friday, September 01, 2017

Automatic Plantain Chips Processing Line consists of Banana slicing machine, Banana washing machine, Banana slice blanching machine, Dehydrating machine, Frying machine, De-oiling machine, Seasoning machine, Manual picking line and Vacuum packing machine. Automatic Plantain Chips...

Thursday, August 31, 2017

Asia Pool & Spa Expo 2018 15-17 May, 2018 Poly World Trade Center Expo . Guangzhou, China Asia Pool & Spa Expo 2018, one of the leading industry trade fair for the industries of swimming pools, spas, sauna, bath, water feature, Water Park in the world, will be held in Poly...

Wednesday, August 30, 2017

Quantity : 1 - Price : $19000

Advantages CW6180 conventional turning lathe from china This type of lathe is suitable for the inner and outer cylinder, cone surface and other rotating parts.The guide rail width of this machine is 600 mm,the whole bed with high rigidity. It can also process all kinds of common system...

Wednesday, August 30, 2017

Quantity : 1 - Price : $54000

CW6294B swing over bed 940mm horizontal conventional turning lathe with good service The horizontal lathe series mainly applies to the inner and outer cylinder, the cone surface, and other rotating parts, can process all kinds of metric, English, modulus and diameter thread, it can...

Wednesday, August 30, 2017

Quantity : 1 - Price : $45000

Chinese CW6194B universal conventional lathe machine price The horizontal lathe series mainly applies to the inner and outer cylinder, the cone surface, and other rotating parts, can process all kinds of metric, English, modulus and diameter thread, it can also pull the oil groove and keyway...

Wednesday, August 30, 2017

Quantity : 100 - Price : 1 000,00 €

Detail Information Automatic Pipe rolling bending machine with push bend for big radius, Roll bending machines with 3 stacks Adapted material: steel pipe, stainless steel, copper pipe, aluminum pipe; Recommended application industry: automobile fittings ( oil pipe for brake, muffler...)

Wednesday, August 30, 2017

Quantity : 100 - Price : 1 000,00 €

Detail Information Automatic Pipe rolling bending machine with push bend for big radius, Roll bending machines with 3 stacks Adapted material: steel pipe, stainless steel, copper pipe, aluminum pipe; Recommended application industry: automobile fittings ( oil pipe for brake, muffler...)