78%MIN - 8756 ads

Saturday, March 12, 2016

Quantity : 50sets/yea - Price : Negotiatable

Instruction and Working Principle Lignite briquette machine (has agglomerant type) main equipment are motor, reducer, main machine, belt pulley, ball groove alignment device of roller shell, hydraulic system, electric control and other parts. cause of the gravity of lignite itself...

Saturday, March 12, 2016

Quantity : 50sets/yea - Price : Negotiatable

Structure of Iron Powder Briquette Machine Feeder system--- achieved dosing feeder to ensure the iron powder feed evenly. Matching motor--- fine iron powder briquette machine the constant of the electromagnetic motor seed control until the weight of the feeder is equal to the needed weight...

Saturday, March 12, 2016

Quantity : 50sets/yea - Price : Negotiatable

Introduction Carbon briquette machine can work directly after the raw materials crushed, no need to add water. For examples: Aluminum scrap, activated carbon alumina, quicklime, etc. The purpose is to reduce the dust, control the capacity, recycling, improve the transportation futures...

Saturday, March 12, 2016

Quantity : 50sets/yea - Price : Negotiatable

Introduction Coal powder briquette machine can work directly after the raw materials crushed, no need to add water. For examples: Aluminum scrap, activated carbon alumina, quicklime, etc. The purpose is to reduce the dust, control the capacity, recycling, improve the transportation...

Saturday, March 12, 2016

Quantity : 50sets/yea - Price : Negotiatable

Introduction Lime powder briquette machine can work directly after the raw materials crushed, no need to add water. For examples: Aluminum scrap, activated carbon alumina, quicklime, etc. The purpose is to reduce the dust, control the capacity, recycling, improve the transportation...

Saturday, March 12, 2016

Quantity : 50sets/yea - Price : Negotiatable

Introduction Strong pressure briquette machine mainly press all kinds of Iron powder, mineral powder, iron oxide skin, slag, refractories, etc. Every powdered materials which need clinker all need to use strong pressure briquette machine. Working Principles Strong pressure briquette...

Saturday, March 12, 2016

Quantity : 50sets/yea - Price : Negotiatable

Introduction Mineral powder briquette machine can put the materials into machine directly after shatter, without water. Such as : aluminum powder, activated alumina, lime, the aim is to reduce dust, control capacity, improve recycling, increase the performance of transport. mineral...

Saturday, March 12, 2016

Quantity : 1set - Price : Negotiatable

Introduction Briquette machine mainly used for pressing powdery material which are difficult to molding, the character of briquette machine is high molding pressure, main engine revolution adjustable, and with a spiral feeding device. Our company specialized in the production of...

Thursday, March 10, 2016

Introduction: JL-X waterproof test system is according to IEC60529, IEC60598, IEC60335 and IEC 60034-5: 2000. The JL-X includes the following test grades: IPX1, IPX2, IPX3, IPX4, IPX5, IPX6, IPX7 and IPX8 (Refer to page 51 of IEC60529). It is widely used in the authentication test...

Thursday, March 10, 2016

Introduction: It is according to IEC60068-2-1(GB/T2423.1) and IEC60068-2-2(GB/T2423.2). It is used to test the CFL/LED which meets IES LM-80-08, electricity products, electronic components, material and so on. Specification: •The chamber is produced by SUS304 Steel, the temperature...

Thursday, March 10, 2016

Before The Curing Appearance White Paste Tack Free Time ≤10 (min) Extrudability 5~11 (g/s，25℃) Cure Time 3～7(d) After the curing Relative Density 1.40～1.45 (g/cm3) Tensile Strength ≥2.5 (MPa) Break Elongation ≥500 (%) Shear Strength ≥2.0 (MPa) Hardness 45～55 (Shore...)

Thursday, March 10, 2016

Before The Curing Appearance White Paste Tack Free Time ≤10 (min) Extrudability 5~11 (g/s，25℃) Cure Time 3～7(d) After the curing Relative Density 1.40～1.45 (g/cm3) Tensile Strength ≥2.5 (MPa) Break Elongation ≥500 (%) Shear Strength ≥2.0 (MPa) Hardness 45～55 (Shore...)

Thursday, March 10, 2016

Before The Curing Appearance White Paste Tack Free Time ≤10 (min) Extrudability 5~11 (g/s，25℃) Cure Time 3～7(d) After the curing Relative Density 1.40～1.45 (g/cm3) Tensile Strength ≥2.5 (MPa) Break Elongation ≥500 (%) Shear Strength ≥2.0 (MPa) Hardness 45～55 (Shore...)

Wednesday, March 09, 2016

Impact Printer Feactures: micro dot matrix printer 1. 4.4 lines/s high printing speed,support various Language; 2. Exquisite design, easy to use; 3. Multiple interfaces optional, USB+Serial, USB+Parallel, USB+Serial+Ethernet; 4. Support black mark printing, compatible with ESC/POS; 5...

Wednesday, March 09, 2016

Quantity : 1 - Price : USD80/UNIT

300mm/s high speed printing 80mm pos printer RP850 rongta printer driver rp80 Feactures of windows ce thermal printer: 1. 6 inch/s high printing speed 2. Support various label printing softwares 3. Label paper automatic positioning, automatic stripping, paper detection 4. Using...

Wednesday, March 09, 2016

OBSA400 Automatic Spiral Coil Binding Machine Features: Fully automatic paper punching, spiral coil forming and inserting, book binding and collection; Ideal for single spiral book, sketch book, student notebook etc; Technical Data: Max binding size: 400mm(punching) x 500mm;...

Wednesday, March 09, 2016

OBCC100 Paper Corner Rounding Machine Features: This machine is applicable to Mourn the card, Aluminum a bagging, Notebook, Book Etc. similar product of The circle Cape cuts to slice. Gray cast iron once formed appearance, more firmly; Technical Data: Max biggest degree 100mm...

Tuesday, March 08, 2016

Price : US$2.0

Datasheets NRF8001 Specification Design Resources Development Tool Selector Standard Package 1 Category RF/IF and RFID Family RF Evaluation and Development Kits, Boards Series nRFgo Type Transceiver; Bluetooth® Smart 4.x Low Energy (BLE) Frequency 2.4GHz For Use...

Tuesday, March 08, 2016

Quantity : 10000 - Price : $4.6

Standard Package 1,000 Category Integrated Circuits (ICs) Family Interface - Controllers Series USBmadeEZ-FIFO Packaging Tape & Reel (TR) Protocol USB Function Bridge, USB to UART Interface UART Standards USB 2.0 Voltage - Supply 3 V ~ 3.6 V Current -...

Thursday, March 03, 2016

Quantity : 1 set - Price : 5890USD

Wire Rope Coiling Winding Machine With Length Counter Height 1200mm Length 1100mm Effective diameter 850mm Max. Diameter 1700mm Min. Diameter 1200mm Weight 430kg Speed adjustment Available Min rotating speed 5 turns per min Max rotating speed ...

Tuesday, March 01, 2016

Technical Parameters Specification AMF050 Nominal diameter DN50 (2 inch) Max flow rate 1000Kg/min Working pressure <=4MPa (580 Psi)</p> Accuracy level (customizable) 0.15 ,0.2 ,0.5 , 1.0 optional Density: 0.001g/cm Repeatability 0.075% ,0.1% ,0.25% ,0.5% optional...

Tuesday, March 01, 2016

Technical Parameters Specification AMF050 Nominal diameter DN50 (2 inch) Max flow rate 1000Kg/min Working pressure <=4MPa (580 Psi)</p> Accuracy level (customizable) 0.15 ,0.2 ,0.5 , 1.0 optional Density: 0.001g/cm Repeatability 0.075% ,0.1% ,0.25% ,0.5% optional...

Tuesday, March 01, 2016

Quantity : 1000sets - Price : USD971

S&A industrial water chiller for spot-weld-machines chilled AC IP 220V 50Hz CW-6000 industrial water chiller with compressor refrigeration is developed and produced by S&A company of China. CW-6000 water chiller has 3000W cooling capacity with ±0.5℃ stability, it has 2...

Tuesday, March 01, 2016

Quantity : 1000sets - Price : USD583

Recirculating chiller for rotary evaporator / small distillation instrument S&A CW-5200 recirculating water chiller is suitable to cool rotary evaporator / small distillation instrument. Its cooling capacity up to 1.4KW and the thermoelectric control in ±0.3℃ precision and temperature...

Tuesday, March 01, 2016

Quantity : 1000sets - Price : USD500

S&A chiller with capacity of 5000 btu/h for chilling fermenters S&A CW-5000 is refrigeration type industrial water chiller of 800W cooling capacity. It is applied to cool fermenters. Industrial water chiller features 1. 800W cooling capacity; use environmental refrigerant; 2...

Tuesday, March 01, 2016

Quantity : 1000sets - Price : USD120

S&A water cooler for cooling milling systems S&A CW-3000 Thermolysis Type Industrial Water Cooler Chiller is applied for milling systems. S&A CW-3000 features: 1. Radiating capacity: 50W / ℃; 2. Small thermolysis water cooler, energy saving, long working life and...

Sunday, February 28, 2016

Before The Curing Performance Indicators A B Appearance Gray Fluid White Fluid Viscosity 1500～2500(cps) 1500～2500(cps) A: B 1: 1 Mixed Viscosity 1500～2500(cps) Operable Time 30～120(min) (Adjustable) Curing Time 3～5(h) After The Curing Hardness 40~50(Shore A) Dielectric...

Sunday, February 28, 2016

Price : 20$

Basic information: CAS#：13463-67-7 Property: The product is not poisonous or toxic,and has special optical property.In addition,it has a good co mpatibility with coating and painting.The product not only has a good ability to absorb UV,but also has a good transmission to visible lights...

Saturday, February 27, 2016

Before The Curing Performance Indicators A B Appearance Gray Fluid White Fluid Viscosity 1500～2500(cps) 1500～2500(cps) A: B 1: 1 Mixed Viscosity 1500～2500(cps) Operable Time 30～120(min) (Adjustable) Curing Time 3～5(h) After The Curing Hardness 40~50(Shore A) Dielectric...

Saturday, February 27, 2016

Before The Curing Performance Indicators A B Appearance Gray Fluid White Fluid Viscosity 1500～2500(cps) 1500～2500(cps) A: B 1: 1 Mixed Viscosity 1500～2500(cps) Operable Time 30～120(min) (Adjustable) Curing Time 3～5(h) After The Curing Hardness 40~50(Shore A) Dielectric...