FOLLOWING - 80 ads

Thursday, November 28, 2024

If you need DAEWOO turbocharger, please contact us as followings: E-mail: turbochargers(at)attachment8(dot)com Web sites: www(dot)as-turbochargers(dot)com SkypeID: jasminecsysy Search "as-turbochargers" to find us. All types of DAEWOO turbocharger we could provide: ...

Thursday, November 28, 2024

The geophone element, ZF-10, is compatible to SG-10 of Sercel Harmonic distortionic: 0.075% Typical spurious frequency: 240Hz Reliable with 3 years warranty We also provide geophone elements as followings: ZF-24HP 10Hz, Compatible to SM-24 of ION; ZF-32 10Hz, Compatible to GS-32CT of Geospace...

Friday, November 15, 2024

Quantity : 30 - Price : 328 USD

Complete Factory Audits / Factory Inspections The aim of a factory audit is to confirm that your factory has the production capacity, capability and quality to meet your production needs. Our highly qualified auditors inspect the factory thorough fully. They carry out a comprehensive...

Friday, May 31, 2024

Overmolding mold is made of overmolding injection molding process which is a special injection molding process that can combine various materials into a single part. Through mechanical and/or chemical bonding of two plastic materials, the overmolding injection molding process can...

Saturday, May 25, 2024

Quantity : 1000 tons/ - Price : RMB 10000~90000/ton

Clad head is a boiler component part of the pressure vessel, which is usually fixed on the two ends of the pressure vessel. It is also a sealing product welded on the pipe end. The welded head can't be knocked-down. The 2 1 semi elliptical tank heads is the end cover on the pressure vessel...

Tuesday, May 21, 2024

Quantity : 50000sets/ - Price : 10-500USD/SET

Tapered roller bearing, which is produced by VXO cam roller bearings, a tapered roller bearing supplier, have tapered inner and outer ring raceways and are configured with tapered rolling elements. This design can withstand the simultaneous action of combined axial and radial loads...

Saturday, March 30, 2024

Packson - Expert in 2K｜Multi-shot Multi-component molding is a highly efficient and cost-effective technology that enables the molding of custom plastic parts using two or three plastic resins or colors in a single operation, resulting in faster cycle times and flash-free products...

Thursday, February 08, 2024

Quantity : 20000 roll - Price : 0.01~1 USD

Custom KT tape with elasticity 170%-200%, good tensile strength. Strong and reliable sticky with high adhesion Soft, comfortable and skin are breathable with cotton material. Hypoallergenic adhesive leaves no residue on body parts. Elastic cotton substrate. The custom kinesiology...

Saturday, January 20, 2024

Anpeng woven wire mesh with slotted openings could be woven in any slot length and with any number of wires in clusters. This type of opening provides greater open area, in addition to higher production compare to regular square mesh. Designed to screen scalp flat, elongated particles...

Friday, December 01, 2023

Quantity : 20000 roll - Price : 0.01~1 USD

Custom Kinesiology Tape Custom KT tape with elasticity 170%-200%, good tensile strength. Strong and reliable sticky with high adhesion Soft, comfortable and skin are breathable with cotton material. Hypoallergenic adhesive leaves no residue on body parts. Elastic cotton substrate...

Wednesday, November 29, 2023

Dears, We are Egyptian outsourcing trading company, Our DUNS # is 84-921-0303, dealing in the field of fertilizer, pesticide and agriculture chemicals mainly in the followings; - Urea N46 Granular - Phosphoric acid 52% - Di ammonium phosphate (DAP) granular - Calcium ammonium nitrate...

Wednesday, November 29, 2023

Self-aligning ball bearings have two rows of balls and two continuous tracks of deep groove ball type in the inner ring. The outer ring has a spherical track with the center of curvature coinciding with the center of curvature of the bearing. This gives the inner ring, the balls,...

Thursday, October 26, 2023

Benefits of Explosion Bonded Clad Plate a. The Explosion Bonded Clad Plate is the metal clad plate produced by the explosive bonding method. It owns core advanced benefits as followings: The Explosion Bonded Clad Plate does not change the chemical compositions and physical states...

Thursday, October 26, 2023

Multi-component molding is a highly efficient and cost-effective technology that enables the molding of custom plastic parts using two or three plastic resins or colors in a single operation, resulting in faster cycle times and flash-free products. As a leading expert in this technology...

Thursday, September 07, 2023

Cast iron filter is an indispensable device on the pipeline of conveying medium. It is usually installed at the inlet end of pressure reducing valve, pressure relief valve, positioning valve or other equipment to eliminate impurities in the medium and protect the normal operation...

Thursday, August 24, 2023

Tapered roller bearing, which is produced by VXO cam roller bearings, a tapered roller bearing supplier, have tapered inner and outer ring raceways and are configured with tapered rolling elements. This design can withstand the simultaneous action of combined axial and radial loads...

Saturday, July 29, 2023

Overmolding mold is made of molding over molding process which is a special injection molding process that can combine various materials into a single part. Through mechanical and/or chemical bonding of two plastic materials, the overmolding injection molding process can be used to...

Thursday, May 25, 2023

Price : 100USD

2k injection molding is one type of injection mold. 2k molding is also named as two shot molding, double shot molding, double-color mold, Multi-material, or multi-component injection mold. 2k injection molding consists of two different plastic materials and colors. With over 15 years...

Tuesday, April 18, 2023

2k plastic injection moulding is one type of injection mold. 2k two color molding is also named as two shot molding, double shot mold, double-color mold, Multi-material, or multi-component injection mold. 2k injection molding consists of two different plastic materials and colors...

Thursday, February 23, 2023

Quantity : 20000 roll - Price : 0.01~1 USD

Custom KT tape with elasticity 170%-200%, good tensile strength. Strong and reliable sticky with high adhesion Soft, comfortable and skin are breathable with cotton material. Hypoallergenic adhesive leaves no residue on body parts. Elastic cotton substrate. The custom kinesiology...

Thursday, February 16, 2023

ISO Class 8 Clean Room  Quality Control  Low & High Volume Manufacturing  Competitive Price  Reliability and Stability 2k injection molding is one type of injection mold. 2k molding is also named as two shot molding, double shot molding, double-color mold, Multi-material,...

Monday, January 16, 2023

This full body bulletproof suit is the upgraded version of the basic outer vest. Such full bulletproof suit provides full NIJ ballistic threat level 3A coverage. Bulletproof full body suit features a removable outer carrier and level 3A ballistic panel inserts (front and back ballistic...)

Friday, December 09, 2022

2K Plastic Injection Moulding  ISO Class 8 Clean Room  Quality Control  Low & High Volume Manufacturing  Competitive Price  Reliability and Stability 2 component injection molding is one type of injection mold. 2k molding is also named as two colour injection moulding ...

Thursday, October 27, 2022

2k injection molding process is one type of injection mold. It is also named as two shot molding, double shot molding, double-color mold, Multi-material, or multi-component injection mold. 2k plastic injection moulding consists of two different plastic materials and colors. With...

Friday, August 26, 2022

Price : 100USD

Self-aligning ball bearings have two rows of balls and two continuous tracks of deep groove ball type in the inner ring. The outer ring has a spherical track with the center of curvature coinciding with the center of curvature of the bearing. This gives the inner ring, the balls,...

Tuesday, August 09, 2022

Quantity : 200 tons/w

Anpeng Slotted Screen Mesh Anpeng woven wire mesh with slotted openings could be woven in any slot length and with any number of wires in clusters. This type of opening provides greater open area, in addition to higher production compare to regular square mesh. Designed to screen scalp flat...

Tuesday, August 02, 2022

Overmolding mold is made of overmolding injection molding process which is a special injection molding process that can combine various materials into a single part. Through mechanical and/or chemical bonding of two plastic materials, the overmolding injection molding process can...

Tuesday, August 02, 2022

2k injection molding is one type of injection mold. It is also named as two shot molding, double shot molding, double-color mold, Multi-material, or multi-component injection mold. 2k injection molding consists of two different plastic materials and colors. With over 15 years mold...

Sunday, July 10, 2022

Quantity : 1 ton - Price : 800,00 €

We are professional manufacturer of filler masterbatch in China. Our masterbatch can be added in many mediums, such as film, bag, sheet, pipe, injection molding,etc Followings are our ranges of products - Transparent Filler Masterbatch - Barium Sulfate Filler Masterbatch - Sodium...

Saturday, June 18, 2022

They can only carry axial loads and cannot carry any radial loads. The shaft rings, seat rings and ball cages are separable and interchangeable. Bearings with spherical washers could prevent misalignment during installation. The followings are the typical thrust ball bearing types...