OILFIELD - 369 ads

High production efficiency upsetting machine for Upset Forging of Oil drill pipe

Friday, March 30, 2018

Price : USD 305000 per piece

DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by using the upsetting machine, Intermediate frequency quenching and tempering machines, pipe threading lathes and some other machines. Highlights: 1...

Anyang Xinheng Machine Tool Co. Ltd.

Low production cost upset forging machine for Upset Forging of oil Country Tube

Friday, March 30, 2018

Price : USD 305000 per piece

DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by using the upsetting machine, Intermediate frequency quenching and tempering machines, pipe threading lathes and some other machines. Highlights: 1...

Anyang Xinheng Machine Tool Co. Ltd.

High efficiency upsetter forging machine for Upset Forging of oil casing tube

Friday, March 30, 2018

Price : USD 305000 per piece

DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by using the upsetting machine, Intermediate frequency quenching and tempering machines, pipe threading lathes and some other machines. Highlights: 1...

Anyang Xinheng Machine Tool Co. Ltd.

Low scrap rate drill pipe upsetter equipment for Upset Forging of Oil casing

Friday, March 30, 2018

Price : USD 305000 per piece

DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by using the upsetting machine, Intermediate frequency quenching and tempering machines, pipe threading lathes and some other machines. Highlights: 1...

Anyang Xinheng Machine Tool Co. Ltd.

Good consistency tubular upsetting equipment for Upset Forging of drilling pipe

Friday, March 30, 2018

Price : USD 305000 per piece

DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by using the upsetting machine, Intermediate frequency quenching and tempering machines, pipe threading lathes and some other machines. Highlights: 1...

Anyang Xinheng Machine Tool Co. Ltd.

Easy operation tubular upsetting press for Upset Forging of drill rod

Friday, March 30, 2018

Price : USD 305000 per piece

DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by using the upsetting machine, Intermediate frequency quenching and tempering machines, pipe threading lathes and some other machines. Highlights: 1...

Anyang Xinheng Machine Tool Co. Ltd.

High efficient automatic pipe upsetting press for Upset Forging of Drilling Equipment

Friday, March 30, 2018

Price : USD 305000 per piece

DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by using the upsetting machine, Intermediate frequency quenching and tempering machines, pipe threading lathes and some other machines. Highlights: 1...

Anyang Xinheng Machine Tool Co. Ltd.

High precision tube upsetting press for Upset Forging of drill collar

Friday, March 30, 2018

Price : USD 305000 per piece

DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by using the upsetting machine, Intermediate frequency quenching and tempering machines, pipe threading lathes and some other machines. Highlights: 1...

Anyang Xinheng Machine Tool Co. Ltd.

Attractive price upsetting press for Upset Forging of Casing Pipe

Friday, March 30, 2018

Price : USD 300000 per piece

DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by using the upsetting machine, Intermediate frequency quenching and tempering machines, pipe threading lathes and some other machines. Highlights: 1...

Anyang Xinheng Machine Tool Co. Ltd.

Automatic control tubing upsetting press for oil pipe

Friday, March 30, 2018

Price : USD310000/EA

DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by using the upsetting machine, Intermediate frequency quenching and tempering machines, pipe threading lathes and some other machines. Highlights: 1...

Anyang Xinheng Machine Tool Co. Ltd.

China 710061 B2B Services
Line Pipe

Tuesday, March 06, 2018

- Line pipe is to take out the ground of oil, gas or water, through the line pipe to the oil and gas industry enterprises. Line pipe includes two kinds of seamless and welded pipe, the pipe end has a flat end, with threaded end and socket end; its connection for the end of welding...

China 710061 B2B Services
High Pressure Fluid Control

Tuesday, March 06, 2018

High pressure fluid control fitting are forged from high strength alloy steel for high-pressure discharge lines, water lines, temporary flow lines, well testing lines, cementing and circulating lines, and other high-pressure applications, in size 1", 2" and 3”, and available in pressure...

China 710061 B2B Services
Solid Control

Tuesday, March 06, 2018

- Decanter CentrifugeLW series decanting centrifuge is the fourth class solids control equipment in well drilling solids control. Using decanter principle to separate suspension liquid. According to rotary speed can be called middle speed decanting centrifuge, highspeed decanting centrifuge...

China 710061 B2B Services
DMS Casing Anchor

Tuesday, March 06, 2018

DMS Casing anchor can anchor the casing bottom and formation together in well bore. It can give the prestressing force to casings in well cementing operation after installing this device. This prestressing force can be kept after the solidification of cement, so that it can avoid...

China 710061 B2B Services
Casing

Tuesday, March 06, 2018

Oil casing is used to support the oil, gas shaft wall of the pipe to ensure that the drilling process and after the completion of the normal operation of the entire well. Each well according to the different drilling depth and geological conditions, to use several layers of casing...

China 262737 Raw materials
DBNPA (2.2-Dibromo -3 - Cyanide (Nitrile) C-based amide)

Friday, January 19, 2018

Quantity : NEGOTIATIO - Price : NEGOTIATION

DBNPA (2.2-Dibromo -3 - Cyanide (Nitrile) C-based amide): CAS NO.: 10222-01-2 Usage: biocides in broad spectrum. It is widely used in industrial circulating water system, large air-condition and the large center of sewage treatment to eliminate microorganism and alga and shuck off clay...

SHANDONG ANGEL CHEMICAL LIMITED

  • 262737 - WEIFANG
  • +13 8 63 66 95 76
RS232 / RS485 GSM GPRS Modem

Saturday, December 16, 2017

Quantity : 1000 - Price : 30-100

Introduction of RS232 / RS485 GSM Modem USR-GPRS232-730 GSM Modem / GPRS DTU (Data Transfer Unit) is a wireless terminal equipment which can convert serial data to IP data or convert IP data to serial data through gprs /GSM network. 730 is based on USR-GM3. Clients can use this product...

Jinan USR IoT Technology Limited

  • 250000 - Jinan
  • +86 531 88826739
RS485 GSM Modems, RS485 to GPRS

Saturday, December 16, 2017

Quantity : 1000 - Price : 30-100

Introduction USR-GPRS232-734 is a new GPRS device developed by USR IOT in 2016. Maturation software functions, covering mostly conventional application scenarios. Users can realize Serial to Network bidirectional transparent data transmission via simple configuration. Supporting custom...

Jinan USR IoT Technology Limited

  • 250000 - Jinan
  • +86 531 88826739
Check Valve

Friday, November 24, 2017

- Check Valve - 1. Size: 2"~36" 2. Connection: ASME B16.10 3. Certifications: API600, BS1868 4. Standard: DIN GB ISO JIS ANSI 5. Material: WCB,CF8M,CF8,CF3,CF3M 6. Working Pressure: Class150LB~Class2500LB 7. Flanged End: ≤24" to ASME B16.5, ≥26" to ASME B16.47 Series A 8. Short...

Globe Valve

Friday, November 24, 2017

- Globe Valve - 1. Material: WCB、 WC6 、WC9、A105、 F11、 CF8、 CF8M 2. Working pressure:CLASS150-CLASS900 3. Nominal diameter:DN50-DN300 4. Temperature :-196℃-650℃ 5. Connection type:flange , weld, thread 6. Suitable medium: water, oil, gas The structure of globe valve is simpler than...

Butterfly Valve

Friday, November 24, 2017

- Butterfly Valve - 1. Material: WCB、 WC6 、WC9、A105、 F11、 CF8、 CF8M 2. Working pressure: CLASS150-CLASS300 3. Nominal diameter: DN50-DN1200 4. Temperature: -196℃-650℃ 5. Connection type:flange , center-line wafer butterfly valve 6. Simple and compact structure, compact and lightweight...

Ball Valve

Friday, November 24, 2017

- Ball Valve - - Material: WCB、 WC6 、WC9、A105、 F11、 CF8、 CF8M - Working pressure:CLASS150-CLASS1500 - Nominal diameter:DN50-DN300 - Temperature :-196℃-650℃ - Connection type:flange, weld, thread - Suitable medium: water, oil, gas Ball valve is mainly used to disconnect or connect...

Valve Series

Friday, November 24, 2017

Valve Series Valve series products include gate valve, ball valve, butterfly valve, globe valve, check valve, plug valve, safety valve and reducing valve. We have high precision NCN machine center, advanced machine equipment and inspection equipment, excellent technology, strict quality...

Flexible Elbow

Friday, November 24, 2017

- Flexible Elbow - - Working pressure: 2000-20000PSI - Normial diameter: 1″-3″ Flexible elbow is a kind of a metal pipe adapter with integral ball bearing. It adopts gold-plated high strength steel with heat treatment to ensure the strength under rated working pressure with long service life...

Pipe Fitting

Friday, November 24, 2017

- Pipe Fitting - - Tube Fittings - - Sizes range from 1/16”to 1 1/2” and 2 mm to 38mm. - Precision machined components ensure perfect deformation of the ferrules and tubing. - Fittings are easy to disconnect and retighten. - Hardened threads with smooth surface finish avoid galling...

Ductile Cast Iron

Friday, November 24, 2017

- Ductile Cast Iron - 1. Certification: ISO9001 2. Range: DN80-2600mm 3. Class: C25/C30/C40//K8/K9 4. Pressure: PN10/PN16/PN25/PN40 5. Joint type: T type/K type/Self-restrained type 6. Material: ductile iron 7. Thread: coarse, fine 8. Suitable medium: Water, gas , liquid material transfer...

Stainless Steel Pipe

Friday, November 24, 2017

- Stainless Steel Pipe - Item Description Product name Stainless steel pipe/tube Material 201 202 304 304L 316 316L 321 309 310 310S 430 410 Thickness 0.5mm-100mm Outer diameter 10mm-1000mm Length 6meters or as per customized Technical treatment Cold rolled and Hot...

Casing

Friday, November 24, 2017

- Casing - External Diameter Internal Diameter Thickness Steel Grade in mm in mm mm 4 - 1/2 114.30 4.000 101.60 6.35 J55, K55, L80,P110 5 127 3.920 99.57 7.37 J55, K55, L80,P111 4.408 111.96 7.52 J55, K55, L80,P112 4.276 108.61 9.29 J55, K55, L80,P113 4...

Tubing

Friday, November 24, 2017

- Tubing - Specification External diameter Thickness Steel grade Processing mm in mm in 1.9 48.260 1.900 3.680 0.145 J55 L80 N80 C90 T95 NUE EUE 2 3/8 60.320 2.375 4.830 0.190 J55 L80 N80 C90 T95 P110 NUE EUE 2 7/8 73.020 2.875 5.510 0.217 J55 L80 N80...

Welded Pipe

Friday, November 24, 2017

1. Standard: GB, GB/T 3091-2001, GB/T3091 2. Grade: Q195-Q345, Q195, Q235, Q345 3. Thickness: 4 - 10 mm 4. Section Shape: Round 5. Outer Diameter: 377 - 508 mm 6. Technique: Cold Rolled 7. Certification: API 8. Surface Treatment: ISO 9. Material: Q195/Q235/Q345/ A/B/X42/X46/X52/X56/X60/X65/...

Number of results per page : 6 30 150

Search OILFIELD