CONDUCTOR CUTTER - 2797 ads

Friday, January 08, 2016

Itis a kind of inductional instrument designed by Faraday's law of electromagnetic induction to measure flow of conductive media in the tube. It adopts the technology of insertion of single chip to realize digital excitation and employs CAN local fieldbus. Electromagnetic flow meter...

Tuesday, December 22, 2015

Construction: 1x75Ohm RG11 Coaxial Cable ( in the center of the cable core) Conductor 1.63mm Solid bare copper Insulation Polyethylene.Thickness 7.25mm. Shield Braid of bare copper wire.Coverage95% Sheath LSZH sheath. Nominal outer diameteris10.3mm. Sheath Color Black...

Tuesday, December 22, 2015

Applications These cables are designed for flexible installations, inside and outside railway rolling stock. Standards DIN 5510-2 Construction Inner conductor Stranded silver plated copper Insulation Crosslink Foam PE (SPEX) Outer conductor (shield 1) Silver plated copper...

Tuesday, December 22, 2015

Construction Inner conductor Plain copper 7 x 0.72 mm Dielectric Low density PE Φ7.25 ± 0.18 mm Outer conductor (shield) Plain copper 192 x 0.2 mm Shield coverage 98% Sheath PVC or LSZH Φ10.4 ± 0.18 mm Electrical & Mechanical Characteristics Impedance...

Tuesday, December 22, 2015

Applications These cables are used for power and control circuits, they can offer excellent protection through the use of a heavy galvanized steel wire armour. The GSWA makes them suitable for use inside and outside buildings or for direct burial in the ground. Construction Conductor...

Tuesday, December 22, 2015

Applications This system cable is used to interconnect L2-BUS components. This cable is an economical solution for the cell and field area. For the information exchange between different automation systems as well as for communication with the connected decentralized field units...

Tuesday, December 22, 2015

Applications This PVC insulated single-core unshielded low-tension wire is used for automobiles. Construction Conductor Cu-ETP1 bare according to DIN EN 13602 Insulation PVC Standard Compliance ISO 6722 Class B Special Properties Conductors >6mm² are suitable for...

Thursday, December 17, 2015

Quantity : ask - Price : ask

Principle An advantage new high-intensity focused ultrasound technology designed instrument,change the traditional face lift wrinkle comestic surgery, non-surgical wrinkle technology, the instrument will release highly concentrated focus sonic energy can penetrate into the deep SMAS...

Thursday, December 17, 2015

Quantity : ask - Price : ask

New Arrival!! FU4.5-2S wrinkle removal skin rejuvenation High intensity focused ultrasound HIFU machine Principle An advancing new high-intensity focused ultrasound technology designed instrument ,change the traditional face lift wrinkle cosmetic surgery ,nonsurgical wrinkle technology...

Monday, December 14, 2015

Feature: is suitable for small wire cable processing, such as AC/DC, power cord, computer cable, electronic cable, multi-core cable. Cutter Types & Options: Stripping cutter 1 set (2 pieces), LL-305 will be equipped with flat cutter in default, other models with v-cutter in default...

Monday, December 14, 2015

Feature: Is suitable for computer multicore cable, shield wire, headset cable,mouse cable,data cable,telephone cable, flat ribbon cable and etc thin cables, general purpose wire gauge is AWG18-AWG32, wire diameter is 1.8 mm above core wires work on this machine well. Descriptions...

Monday, December 14, 2015

Feature: Is suitable for computer multicore cable, shield wire, headset cable,mouse cable,data cable,telephone cable, flat ribbon cable and etc thin cables, general purpose wire gauge is AWG18-AWG32, wire diameter is 1.8 mm above core wires work on this machine well. Descriptions...

Monday, December 14, 2015

Features: 1) Coaxial cable stripping machine can strip max 9 layers once. 2) Can store 50 programs, operate easily with LCD. 3) Start method: Manual oepration,Foot switch. 4) Blade is made of tungsten steel. Specifications: Suitable for coaxial cable,triaxial cable,shield cable...

Monday, December 14, 2015

Feature: 1.）is capable of cutting single core wire and flat sheath cable, finalize the function of stripping wire front and nail in one time. ( is necessary to customize cutter and conduit). 2.) is capable of stripping the sheath of multiple cores round sheath cable as the setting...

Monday, December 14, 2015

Feature: 1.) this machine is designed for corrugated tube, silicone tube, rubber hose, oil pipe, coffee, medical tubing, gas pipe, water pipe, and a series of tubes fixed-length cutting design, the caterpillar feed control, high precision, high speed. 2.) the cutting device adopts...

Monday, December 14, 2015

LL-100 Hot & Cold Automatic Electronic Cutting Machine Will cut and count up to 99,999 pieces. AUTO stops on any count it is set for.It measures and cuts almost any type of synthetic strip material from thin ribbons to heavy webbings with an electrically heated compressed air driven blade...

Monday, December 14, 2015

LL-100 (S) Precision Tubing & Sleeving Cutting Machine Will cut and count up to 99,999 pieces. AUTO stops on any count it is set for. it will cut light gauge wire, rubber, heat shrink tube, plastic tube, Teflon tube, enameled wire, foam sheet, paper belt, adhesive tape, insulated tube...

Monday, December 14, 2015

Feature: 1. High speed: It can cut 100~120 cut per minute. (50mm long) 2. Accuracy: Cut-length is accurate. Material is sent by a stepping motor. 3. Cutting type: Cutting is neat due to using a cold cutter which is durable. 4. Automatic operation: It works automatically only...

Monday, December 14, 2015

Name: Split Hydraulic Cable Cutter Model: CPC-150H Output: 18TON Length: 670mm Weight: 25KG Cut Range: 150mm diameter of copper or aluminum armored cable, wires, telephone cables. Attention: Do not cut steel core cable. Split Hydraulic Cable Cutter Description: 1.) Convenience...

Monday, December 14, 2015

This model of electric scrap wire stripper is widely used for all types of electric wire, high pressure electric cable,optimic cable. it can be processed for single electric wire at diameter 2mm above, sheathed cable, steel wire on roller. 4 * 4 three-phase electric machinery configuration...

Saturday, December 12, 2015

Quantity : 5000pcs/mo - Price : $15/pc

High Quality Machining Screw Taps for Machining Machinery Specifications 1. machine taps 2. Steady quality&competitive price 3. Type: M,UNC,UNF,W 4. quick delivery time High quality OEM Machine tap Main Products: Inserts, Cutting Tools, Milling Cutters, Solid Carbide Cutters...

Saturday, December 12, 2015

Quantity : 5000pcs/mo - Price : $15/pc

High Quality Cutter Supply HSS Screw Tap for Milling Machinery Specifications 1. machine taps 2. Steady quality&competitive price 3. Type: M,UNC,UNF,W 4. quick delivery time Main Products: Inserts, Cutting Tools, Milling Cutters, Solid Carbide Cutters, End Mills, Solid...

Saturday, December 12, 2015

Quantity : 5000pcs/mo - Price : $15/pc

China Supply High Precision Milling Cutters for Machining Machinery 1.Milling cutter. 2.Steady quality&competitive price. 3.Type: M,UNC,UNF,W... 4.Quick delivery time. High quality OEM Milling Cutters Main Products: Inserts, Cutting Tools, Milling Cutters, Solid Carbide Cutters...

Saturday, December 12, 2015

Quantity : 5000pcs/mo - Price : $15/pc

China Manufacture Various Kinds Twist Drill for Machining Machinery Specifications 1. Twist drill 2. Steady quality&competitive price 3. Type: M,UNC,UNF,W 4. quick delivery time Main Products: Inserts, Cutting Tools, Milling Cutters, Solid Carbide Cutters, End Mills, Solid...

Saturday, December 12, 2015

Quantity : 5000pcs/mo - Price : $15/pc

High Precision Machining Reamers from Lathe Cutting Tools Supplier Specifications 1. Reamers 2. Steady quality&competitive price 3. Type: M,UNC,UNF,W 4. quick delivery time Main Products: Inserts, Cutting Tools, Milling Cutters, Solid Carbide Cutters, End Mills, Solid Carbide Cutters...

Saturday, December 12, 2015

Quantity : 5000pcs/mo - Price : $15/pc

High Precision Machining Reamers from Lathe Cutting Tools Supplier Specifications 1. Reamers 2. Steady quality&competitive price 3. Type: M,UNC,UNF,W 4. quick delivery time Main Products: Inserts, Cutting Tools, Milling Cutters, Solid Carbide Cutters, End Mills, Solid Carbide Cutters...

Saturday, December 12, 2015

Quantity : 5000pcs/mo - Price : $15/pc

China Manufacture Various Kinds Twist Drill for Machining Machinery Specifications 1. Twist drill 2. Steady quality&competitive price 3. Type: M,UNC,UNF,W 4. quick delivery time Main Products: Inserts, Cutting Tools, Milling Cutters, Solid Carbide Cutters, End Mills, Solid...

Saturday, December 12, 2015

Quantity : 5000pcs/mo - Price : $15/pc

China Supply High Precision Milling Cutters for Machining Machinery 1.Milling cutter. 2.Steady quality&competitive price. 3.Type: M,UNC,UNF,W... 4.Quick delivery time. High quality OEM Milling Cutters Main Products: Inserts, Cutting Tools, Milling Cutters, Solid Carbide Cutters...

Saturday, December 12, 2015

Quantity : 5000pcs/mo - Price : $15/pc

High Quality Cutter Supply HSS Screw Tap for Milling Machinery Specifications 1. machine taps 2. Steady quality&competitive price 3. Type: M,UNC,UNF,W 4. quick delivery time Main Products: Inserts, Cutting Tools, Milling Cutters, Solid Carbide Cutters, End Mills, Solid...

Saturday, December 12, 2015

Quantity : 5000pcs/mo - Price : $15/pc

High Quality Machining Screw Taps for Machining Machinery Specifications 1. machine taps 2. Steady quality&competitive price 3. Type: M,UNC,UNF,W 4. quick delivery time High quality OEM Machine tap Main Products: Inserts, Cutting Tools, Milling Cutters, Solid Carbide Cutters...