98%TECHNICAL - 12736 ads

Friday, September 08, 2023

TTA16 has the feature of low viscosity, heat resistance, weather resistance, and electrically insulating. Due to the unsaturated bonds of specialtyresins and acrylates, TTA16 has the characteristics of epoxy resins and acrylic resins and can be cured with a variety of curing methods...

Friday, September 08, 2023

TTA27 (dicyclopentadiene epoxide) is a typical cycloaliphatic epoxy resin. Its molecular structure is characterized by a close bicyclic structure between two epoxy groups and a stable methylene bridge across the six-membered ring. Therefore, the cured product of TTA27 has the characteristics...

Thursday, September 07, 2023

Leadtek can supply 0.96"~43" custom design capacitive touch screen china which have been successfully developed and produced. The main structure is G+G and G+F, G+F+F, Single-touch & multi-touch for customer's option. It can support 10 fingers, swipe, page turning or other functions...

Thursday, September 07, 2023

Name: Hydroxy Terminated Polydimethylsiloxane (Methyl Silicone Oil) Melt Point (℃): -59 Spontaneous combustion point (℃): 450 Saturated vapor pressure (KPa): No Data Explosive: No Data Solubility: Soluble in benzene, toluene, ethylene, ethyl ether, partially soluble in ethanol, butanol...

Thursday, September 07, 2023

Product Name: D4 Silicone Octamethylcyclotetrasiloxane Molecular Formula: (CH3 ) 8 Si4 O4 Octamethylcyclotetrasiloxane CAS No.: 556-67-2 Physical and Chemical Properties: Freezing Point: 17~18℃ Boiling Point: 175-176℃ Flash Point: 60℃ Relative Density（water=1）: 0.956 Appearance: Colorless...

Thursday, September 07, 2023

Name: Methyltrichlorosilane (M1) Feature: This product is a colorless transparent liquid. It is the main material of silicone products to produce methyltriethoxysilane and silane crosslinking agent (methyl triethoxysilane and methyltrimethoxysilane), and produce silicon resin, special coatings...

Thursday, September 07, 2023

Product Name: Hexamethylcyclotrisiloxane Molecular Formula: [(CH3 ) 2 SiO]3 Molecular Weight: 222.47 CAS No.: 541-05-9 UN No.: 1325 Physical and Chemical Properties: Melting Point: 64℃ Boiling Point: 134℃ Relative Density (water=1): 1.12 Appearance: White crystalline lens. Technical...

Thursday, September 07, 2023

Name: Fumed silica Appearance: Fluffy white powder. Technical Data of Fumed Silica Item Indexes The nitrogen adsorption specific surface area/（m2/g） Typical values±30 Loss on ignition/% ≤ 2.5 Silica content/% ≥ 99.8 Suspension PH 3.7~4.5 Al2O3 content/（mg/kg） ≤ 400 TiO2...

Thursday, September 07, 2023

Quantity : 20GP

CSA Binder Introduction: Calcium Sulfoaluminate binder is pure CSA clinker that grinded without any gypsum. It is a hydraulic cementitious material blend high in C4A3S (Calcium Sulfoaluminate Crystals). CSA Binder characteristics • Appearance: light grey powder • Rapid strength...

Thursday, September 07, 2023

Quantity : 20GP

CSA expansive additive description: The CSA expansive additive is obtained by blending natural anhydrite with clinker powder which consists of calcium sulfoaluminate and CaO. This CSA expansive additive is always mixed with ordinary cement. When mixed in the proper proportion with...

Thursday, September 07, 2023

Quantity : 20GP

CSA (Calcium Sulfoaluminate Cement) cement is a special cement used in many applications where early high strength and fast setting development are necessary. CSA cement is short for Calcium Sulfo-aluminate Cement, also named rapid setting cement, high strength cement, fast hardening cement...

Thursday, September 07, 2023

Quantity : 20GP

What Is CSA Cement? CSA (Calcium Sulfoaluminate Cement) cement is a special cement used in many applications where early high strength and fast setting development are necessary. cement CSA is short for calcium sulphoaluminate cement, also named rapid setting cement, high strength cement...

Thursday, September 07, 2023

TP60 trigger probe includes a trigger probe unit and a taper shank. TP60 probe is a trigger probe, it can used to measure all kinds of solid materials workpieces. TP60 trigger probe is suitable for various specifications of machine centers, CNC boring and milling machines, and drilling-tapping...

Thursday, September 07, 2023

RPS-L11M radio probe system contains TP200 touch probe, RPDM transceiver, RSI-20M receiver and standard measuring software, applied in lathe probe, multi-tasking machines probe and turning machine probe. The RPDM is a radio frequency probe designed to be turret-mounted for part setting...

Thursday, September 07, 2023

RPS-20M radio probe system contains RP610M touch probe, RSI-20M receiver and standard measuring software. The RP610M is a compact spindle probe with radio signal transmission which offers automated part set-up and in-cycle gauging on machining centers, including 5-axis machines. RPS-20M...

Thursday, September 07, 2023

Sorbitan tristearate in food, also known as STS, is synthesized by the esterification of sorbitan with stearic acid. It has a molecular formula of C60H112O8. At room temperature, it is in the form of a white to yellow granular solid. It has an HLB value of 2.1, which is fairly lipophilic...

Thursday, September 07, 2023

Sorbitan trioleate, also known as STO, is synthesized by the esterification of sorbitan with oleic acid. It has a molecular formula of C60H108O8. At room temperature, it is in the form of a pale-yellow viscous liquid. It is a W/O emulsifier with an HLB value of 1.8. It is soluble...

Thursday, September 07, 2023

Sorbitan sesquioleate, also known as SSO, is synthesized by the esterification of sorbitan with oleic acid. At room temperature, it is in the form of a yellow viscous liquid. Sorbitan sesquioleate in cosmetics is a W/O emulsifier with an HLB value of 3.7. It is soluble in ethanol...

Thursday, September 07, 2023

Sorbitan monostearate, also known as sorbitan stearate/SMS, is synthesized by the esterification of sorbitan with stearic acid. It has a molecular formula of . At room temperature, this is in the form of a pale-yellow to yellow granular solid. It has a sorbitan monostearate HLB value of 4...

Thursday, September 07, 2023

What are mechanical seals (End-face Mechianical Seal)? Also known as a face seal, the mechanical seal is a rotary machine shaft seal device, refers to the mechanical seal at least a pair of perpendicular to the axis of rotation of the end surface in the liquid pressure and compensation...

Wednesday, September 06, 2023

Copper tape, also called copper foil shielding tape, is made of copper with a purity higher than 99.95% as the base material and coated with acrylic adhesive. The copper sticky tape is divided into single conductive and double conductive: single conductive coated with non-conductive glue...

Wednesday, September 06, 2023

lack polyester tape also called as a black shading tape, Black polyester tape is made of polyester film as the base material and coated with high temperature resistant silicone gel. Black polyester tape is insulated and high temperature resistant, with a transparent release film optional...

Wednesday, September 06, 2023

Quantity : 200 units, - Price : $60~$20,000

R8650C fully bga rework station automatic is a fully automatic visual alignment BGA rework station. This BGA repair station can be used as an automated desoldering machine and is suitable for automatic visual placement of various chip devices on large PCB boards (such as 5G communication...)

Wednesday, September 06, 2023

Quantity : 200 units, - Price : $60~$20,000

R7830A is an optical alignment automatic rework equipment. It also works as laser BGA SMD rework station, multi-language menu interface, automatic feeding device, X/Y AXI machine that can be controlled by joystick, fast and convenient operation, imported high-definition CCD (2 million...)

Wednesday, September 06, 2023

Quantity : 200 units, - Price : $60~$20,000

ZM-R7220A infrared SMD rework station is an intelligent infrared soldering station with real-time temperature monitoring, optical alignment system, rapid heating, and cooling. As an ir soldering station manufacturer, Zhuomao promises to provide high-quality infrared BGA rework machines...

Wednesday, September 06, 2023

Quantity : 200 units, - Price : $60~$20,000

Microfocus X-ray inspection is widely used in LED/automobile/aerospace/EMS etc field and become a necessity for modern PCBA inspection. The X-ray reel counter machine, parts counter machines produced by Seamark ZM have the characteristics of high performance, cost-effectiveness...

Wednesday, September 06, 2023

Price : USD 150- 600

Palm oil is not only the highest yielding cheap vegetable oil on the earth but also a safe raw material for edible oils and daily chemicals, and a raw material for biofuel. As a raw material for edible vegetable oils, chemical raw materials and biofuel, palm oil has attracted worldwide...

Wednesday, September 06, 2023

Functions Type D021 dome closure fiber optic can be used for aerial,underground, pipeline and wall mounting. The suitable working temperature range is -40℃~+65℃. With 9 optical cable ports, the maximum capacity of bundle fiber can reach 144 cores, and the maximum capacity can be installed...

Wednesday, September 06, 2023

GJS-D010 Dome Fiber Closure Functions Type D010 fiber optic splice enclosure can be used for aerial,underground, pipeline and wall mounting. The suitable working temperature range is -40℃~+65℃. With 5 optical cable ports, the maximum capacity of bundle fiber can reach 288 cores, and...

Wednesday, September 06, 2023

Choke manifold for sale control and implementation of oil and gas pressure control technology. In case that the BOP is off, the pressure at the bottom of well shall be kept higher than formation pressure through controlling casing pressure with choke valve on-off. Additionally, soft...