CHINA|FACTORY - 41036 ads

Friday, September 11, 2020

Sand blasting room is primarily for cleaning big steel structural parts, vessel, truck chassis to remove the rusty spot, rusty layer and scale cinder on steel to obtain a uniform, smooth and glossy metal surface allowing improved coating quality and higher anti-corrosion performance...

Friday, September 11, 2020

Quantity : 500tons - Price : USD0.015-----USD100

Category: hard ferrite magnets/ china ceramic magnets Advantages: coercive force is high;strong resistance to demagnetization,suitable for dynamic working magnetic circuit structure;good corrosion resistance,surface treatment not needed Disadvantages: low magnetic energy; not resistant...

Friday, September 11, 2020

Quantity : 500tons - Price : USD0.015-----USD100

Category: AlNiCo magnets/metal perpament magnets Advantages: high magnetic energy, good temperature stability Disadvantages: very low coercive force,easy to be demagnetized, magnetic circuit design can not use thin disc magnets, and must be assemblied first then overall magnetized...

Friday, September 11, 2020

During the production process of cassava starch, the sieving section is used to separate the fine residues(fiber) from the cassava slurry, remove the residues, reserve and convey the cassava slurry to subsequent sieving equipment. Cassava Centrifugal Sieve Cassava Sieving Machine...

Friday, September 11, 2020

Goodway can provide the complete set of cassava flour processing machine from cassava washing to final product packaging, including cassava washing machine, cassava peeling machine, cassava crusher machine, cassava grinding machine, cassava sieving machine, cassava dewatering machine...

Friday, September 11, 2020

Price : 500-10，000，000

TJK Machinery CNC Stirrup bending machine has always led the development of the industry, with the most advanced international technology achievements and a number of core invention patents. Development and production of a full range of CNC Stirrup Bending machine and supporting a...

Friday, September 11, 2020

Price : 500-10，000，000

Manual Stirrup Bender WG12F has the particular patented straightening system, constituted by sets of horizontal and vertical rollers that can be automatically adjusted, is integrated with 4 pulling rollers that eliminate the torsion Features of Stirrup Bender WG12F 1This CNC intelligent...

Friday, September 11, 2020

Price : 500-10，000，000

TJK Stirrup Bender WG12D-5 has the particular patented straightening system, constituted by sets of horizontal and vertical rollers that can be automatically adjusted Features of Stirrup Bender WG12D-5X 1Don't need to replace the mold to process bi-directional bending; 4Wheels for...

Friday, September 11, 2020

Price : 500-10，000，000

Stirrup Bender WG12D-4(stirrup rebar) has the particular patented straightening system, constituted by sets of horizontal and vertical rollers that can be automatically adjusted. Features of Stirrup Bender WG12D-4 1Pure electric CNC stirrup bending machine, traction compression volume...

Friday, September 11, 2020

Price : 500-10，000，000

It's capable with hot-rolled Ⅰ, Ⅱ, Ⅲ, Ⅳ grade ribbed steel with high-quality shearing, transportation, storage and processing, and the whole process is controlled by the computer, high production and accuracy with labor saving. The equipment mainly used for steel processing and distribution...

Friday, September 11, 2020

Price : 500-10，000，000

International invention patents, unique technology, high-precision PLC control, high efficiency and durability design, the system designed with a powerful graphics library which has a management software communication function. It has an inclined working structure, the feeding and...

Friday, September 11, 2020

Price : 500-10，000，000

Technical Data: Overall Diameter: 12500 2200X1020（mm） Bending Speed: 9r p m Bender Moving Speed: 0 5～ 1m s Power Supply: 380V 50H Features of Rebar Bending Line G2W50 (10-50 mm) 1International invention patents, China's unique technology, high-precision PLC control, high-efficiency design...

Friday, September 11, 2020

Price : 500-10，000，000

Step and floor anti-skidding designed, equipped with coat hook, mirror, tissue box and shelve. design, customer can choose antifreeze-type which equipped with heating equipment. - More Detail Portable Toilet with Uriral NKL001-PX - - Technical Data of Portable Toilet with Uriral...

Friday, September 11, 2020

Price : 500-10，000，000

Duplex bending axis set being used in TJK 3d wire bending machine, a variety of molds are available for making different sizes of stirrups, workable with "8" type stirrups Features of 3D CNC Wire Bender 1Precut steel bar 6-14mm is workable, max wire length up to 1700mm ; Duplex bending...

Thursday, September 10, 2020

Price : US $1 - 3,000 / Set

Basic information of Double Orifice Air Release Valve This valve is a pipeline will be matched equipment, apply to the temperature does not exceed 100 ℃ water, hot water pipe on the pipe from the air. Features of Double Orifice Air Valve 1. Body is provided with a shock-proof inner...

Thursday, September 10, 2020

Price : US $1 - 3,000 / Set

Basic information of Disc China Wafer Check Valve This valve can prevent the backflow of the medium, prevent the pump and its drive motor reversal, and discharge of the medium in the container. Features of Disc Wafer Check Valve 1. Structure length is short and the structure length...

Thursday, September 10, 2020

Price : US $1 - 3,000 / Set

Basic information of Combined Butterfly-Check Valve This valve acts as a closed circuit valve and a check valve to protect the system by avoiding and reducing the backflow of the intermediate fluid in the piping system and causing excessive water hammer. Features of Combined Butterfly-Check...

Thursday, September 10, 2020

Price : US $1 - 3,000 / Set

ZECO is a Chinese rubber lined butterfly valve manufacturers , the main production is water butterfly valve and so on. The rubber lined butterfly valve is especially widely used in operating conditions due to small installation and price advantage. Butterfly valves are usually used...

Thursday, September 10, 2020

Rocker arm assembly machine: rocker arm is part of automotive engine. The machine stations including: rocker arm oil hole check, width check of rocker arm body, needle check, shaft length check, riveting, pushing force check, roller flexibility check, roller parallelism check, card assembly...

Thursday, September 10, 2020

Applying advance techniques of feeding and handling, flexible conveying, robot integration, visual inspection and laser marking, Yiheda provides automation solutions of automotive parts production to customers according to the features of products and their demands. Successful cases...

Thursday, September 10, 2020

The automatic packing machine completes the requirements of packing and testing, which is composed of automatic packing machine, screw packing machine and 3D packing machine. It can achieve multiple functions such as box automatically formed, automatic packing of product and specification...

Thursday, September 10, 2020

Machine introduction of Turntable 90 degree linkage high-speed manipulator Driven by two sets of servo motor and screw rod, the manipulator can move in X-axis and Z-axis direction. One X-axis action plus two z-axis actions are a cycle, the cycle time is 1.2s, which guarantee the speed...

Thursday, September 10, 2020

installation component are used to support the installation of various components of automation equipment such as actuators, manipulators, general press-fitting, custom assemblies, etc. Which includes a base, block, column, reinforcing block and parallel block, etc. It can be selected...

Thursday, September 10, 2020

The component can be used in all kinds of module and vertical installation, the height and angle of the installation are easy to adjust. Even use the long column can guarantee the high accuracy, especially in modular system, meanwhile, we have different specifications to meet different...

Thursday, September 10, 2020

The conveyor overcomes the all the shortcomings of traditional belt such as belt tearing, puncture and corrosion, which makes it become a safe, convenient way of transportation. Mainly used in all kinds of food, electronic parts, carton packing and warehousing and logistics transportation...

Thursday, September 10, 2020

Price : 0,50 €

Polycrystalline diamond composite(PDC) Polycrystalline diamond composite(PDC) sheet is made of diamond particles and cemented carbide matrix sintered at 60,000 atmospheres, high temperature and high pressure above 1500 ℃, and has the high hardness of diamond and the high toughness...

Thursday, September 10, 2020

Price : $4,800.00-$35,000.00

4 axis CNC router for full automatic 3D machining of carving, engraving, marking, cutting, turning, drilling, milling or grooving. 4 axis CNC woodworking machines are available for wood (softwood, hardwood, solid wood, plywood, MDF),fabric, leather, PVC. And 4 axis CNC router machines...

Wednesday, September 09, 2020

- Contact - John Yang Email(Skype) : sales3@askplc.com Mobile(WhatsApp) : 86-18150117685 - Introduction - Moore Automation Limited focuses on control systems, from legacy to leading edge. We have a large inventory of high quality, surplus control system parts. We also distribute...

Wednesday, September 09, 2020

Quantity : 4000 pcs/m - Price : 200-1000000

The outer ring or inner ring of double taper roller bearing is a whole unit. ZWA's two-row tapered roller bearings can be divided into metric and imperial ones. For metric tapered roller bearings, ZWA will match the tolerance and dimension of spacers for the two single-row tapered...

Wednesday, September 09, 2020

Quantity : 50000 piec - Price : USD2000

Our products include hundreds of standard magnetic assembly that can be used in workshops, schools, homes, supermarkets, offices, precast plants, etc. Large Selection of Magnetic Assemblies for Various Applications Our products include hundreds of standard magnetic assemblies that...