EXTRUDING - 202 ads

Wednesday, October 08, 2014

Quantity : 20000 mete - Price : USD0.36/meter

Product Description pvc high pressure spray hose Specification NAME Inch I.O mm O.D mm W.P bar B.P bar Roll m WEIGHT kg HIGH PRESSURE HOSE(3Layer) 5/16 8.5 14 60 160 30 3.52 50 5.87 60 7.05 100 11.75 3/8 10 16 60 160 30 4.98 50 8.30 60 9.96 100 16...

Wednesday, July 30, 2014

Quantity : 10

Alumina Ceramic standard size: Casting Tube: Diameter from 6mm to 160mm, length from 10mm to 1800mm Both sides open (BOE) and one end closed (COE)types can be made. Extruding Tube: Diameter from 1mm to 12mm, Length from 10mm to 1800mm mullti bores tubes can be made. Pressing Tube...

Tuesday, April 15, 2014

Quantity : 1 - Price : 85000USD

DESCRIPTION This PP PE film pelletizing line feature two single-screw extruders, and the machine is especially designed for processing super thin PP PE film flakes and turning them into valuable PP / PE pellets. Two stages design reinforce plasticization capacity. High performance...

Monday, April 22, 2013

Quantity : 1 - Price : 27,000USD

1.MAP machine is suitable for all kinds of food trays, fill in one or three different gases and sealing the trays in order to maintain the fresh of products. 2.Variety of sealing material: Suit for laminated film, single film, extruding film, Aluminum film, Aluminum can, could seal...

Thursday, April 11, 2013

Quantity : 15-20sets/ - Price : 1500-2000USD/set

Plate Oil Filter Introduction The plate edible oil filter is always used as a purifier in edible oil processing plants. Plate oil filter can be matched with oil press Model Whirlston series screw oil press and Whirlston hydraulic oil press to make the much higher quality edible oil...

Thursday, April 11, 2013

Quantity : 15-20sets/ - Price : 1500-2000USD/set

Integrated Screw Oil Press Introduction Integrated screw oil press is an advanced oil pressing machine nowadaysin the market. It is used for processing edible oil from a wide range of oil plants such as peanuts, rapeseed, cotton seeds, sesame seeds, sunflower seeds and coconut seeds and so on...

Monday, November 12, 2012

Quantity : 1000pcs - Price : USD 16.30/pcs based

Features： - Apply the ultrasonic atomization humidification with high frequency vibration, atomize the water into 1-5 micron ultrafine particles, and then diffuse the mist through wind device, which can effectively increase the indoor humidity and moisture your skin during the atomization...

Saturday, June 16, 2012

Quantity : 9999 - Price : 1,00 €

Air Cooling Type Batch-off Cooler is used for cooling, folding and depositing the rubber strip that comes from the open mills or twin screw extruder. Structure: There are two kinds: overhead and floor-standing types. Batch off cooler can coat with isolation agent, cooling and laminated...

Friday, June 10, 2011

Quantity : Eye Gel Tu - Price : Tube

We introduced into 4 automatic product lines, including the series of procedures: Molding, extruding performing, injection molding, printing(6 colors offset printing and 5 colors silkscreen printing), hot-stamping, and sealing. We can make 6 different colors at the same time. The...

Sunday, August 09, 2009

Price : lower price

Products Introduction: Calcium Carbonate Additive for ABS (Product code: En436) has China’s technology patent and we use compound inorganic particle mix with two high reactivity additive in the surface. We also use double packing film technology and made its surface has strong elasticity film...

Sunday, January 25, 2009

Quantity : 1 set

Corn flakes ( breakfast cereals) use corn and other cereals as main material, through mixing, extruding (or boiling), planishing, drying, baking, coating and coating and cooling, to get crispy flakes. It can be mixed with coffee or milk, or eaten as snacks.Location : 2 shanda road...

Sunday, January 25, 2009

Quantity : 1 set

This processing line is for pellet and chips producing by single-screw extruder. The raw material can be potato starch, corn starch, cassava starch, wheat flour, etc. through extruding cooking. The pellet can be different shapes like shell, spiral, square tube, circle tube, and so on...

Sunday, January 25, 2009

Quantity : 1 set

Double-screw extruder inflating snacks food processing line is a new type of extruding food processing line studied and developed by ourselves on the basis of learning from advance technology in the world so that its technical performance and quality of produce both reach to the most...

Sunday, January 25, 2009

Quantity : 1 set

Product Features: 1.Series of double-screw extruder consist of feeding system, extruding system, cutting system, heating system, lubricating system and controlling system 2.Feeding system, extruding system and cutting system all adopt frequency-conversion timing to gain powerful drive...

Saturday, September 06, 2008

Quantity : 1

The foaming machine is mainly used in producing the EPE tubing, the process is like this: first melt the LDPE tree ester, then mix it with the butane gas, the talcum powder, anti-contraction medicinal preparation and other medicinal preparation, squeeze out the mixture through the...

Saturday, May 17, 2008

Mouldings, made to our customers' Requirements, are available in various grades of Silicone Rubber, or alternatively, in other materials viz: Neoprene - Nitrile - Natural EPDM and in Fluorocarbon Elastomers. We have the capacity to provide small, medium and large call offs. Prompt...

Saturday, January 26, 2008

Quantity : As request - Price : Negotiating

The screw has applied oil cooking system. Barrel is cooled by special wide cooling system.The system has applied special computer control.According to customer’s requirements,most reasonable screw can be made so as to achieve best plasticity state and material quality.The screw is...

Sunday, July 15, 2007

Quantity : 1 - Price : negotiable

HC-series extrusion production lines are as follows: TSK series parallel twin screw extruder, Mono screw and dual screw extruder, extruding line for PE/PP pipe, Extruding line for UPVC/PPR/PE-Xa pipe, Aluminum-plastic complex pipe production line, PVC plate extrusion and PET baling...

Friday, July 13, 2007

Price : consultation

We have been pioneering in exporting of industry equipments in the past 30 years. We supply plastic processing machines including Injection Molding Machine, Blow Molding Machine, Extruding Machine, Plastic Recycling Lines, Combined Line, as well as all series of auxiliary machines...

Thursday, May 31, 2007

Price : consultation

HC-series extrusion production lines are as follows: TSK series parallel twin screw extruder, Mono screw and dual screw extruder, extruding line for PE/PP pipe, Extruding line for UPVC/PPR/PE-Xa pipe, Aluminum-plastic complex pipe production line, PVC plate extrusion and PET baling...

Saturday, April 07, 2007

Our company offers LPG tubing as below; Tube: NBR, black, smooth Reinforcement: textile braided high tensile synthetic yarn Cover: orange NBR blended, ozone and weather resistant and abrasion-proof, smooth Application: for conveyance of liquid gas, home burner system, grill, oil-resistant...

Saturday, September 16, 2006

Quantity : large - Price : negotiation

Application 1) As the lubricant, cost-saving agent and release agent in the course of extruding, calendering, injecting, blowing molding of PE, PP, PVC and other plastic. 2) As the dispersant Agent for master batch, color concentration. 3) As Mold release Agents. 4) As the additive for shoeshine...