COIL - 2311 ads

Saturday, August 06, 2016

DP028-2: rated load 2T, thickness of bottom plate-6mm, dia of bottom plate-800mm, weight- 50kg DP028-3: rated load 3T, thickness of bottom plate-6mm, dia of bottom plate-850mm, weight- 65kg DP028-5: rated load 5T, thickness of bottom plate-6mm, dia of bottom plate-1200mm,...

Saturday, August 06, 2016

Use: support ladder type structure suitable for cable tray, you can use a variety of specifications of wire coil Trapezoidal wire laying frame, commonly known as "cable support" for placement of cable tray, overhead wires or cables, adopts a hydraulic device, footing with ferry...

Sunday, July 31, 2016

Price : 1 544,00 €

Warranty: 24 months guarantee for the whole unit. Features: 1.Safety: water and electric separately. 2.Simple installation: Compact design(Main unit and water tank),DIY installation is available to saving costs! 3.Conveninet: Intelligent remote controller,with simple key operation...

Friday, July 29, 2016

Quantity : per carton - Price : 20usd

we can supply coil nails, coil roofing nails ,staple, brads with good quality. Location : , 266300 jiaozhou, Contact : Jason HOU, 86 532 86321254

Friday, July 15, 2016

Price : negotiable

Since all metals used for coil windings have a positive temperature coefficient of resistance, NTC thermistors are especially useful for compensating resistance changes in devices subjected to temperature variations. Due to the high temperature coefficient of the thermistor as opposed...

Friday, July 15, 2016

Quantity : 2k - Price : 28usd/pc

1.Driver: 9mm neodymium magnet moving coil unit. 2.Frequency Response: 20~20K HZ 3.Impedance: 16ohms 4.Sensitivity: 105dB(+/-5dB) 5.Plug: 8pin Lightning 6.Cable Length: 1.2M+/-15% 7.Cable Jacket: TPE,flat type or round type 8.Cable cord: 6N OFC 9.Earphone Shell: Aluminum...

Thursday, July 14, 2016

Quantity : 1set - Price : USD150000

PET bottle recycling machine is used to recycle the waste PET bottles, for example, the mineral bottles, beverage bottles and oil bottles etc. The flowchart is as following: 1, de-bale the packages, pre-wash the bottles. 2, remove the most labels and caps by label and cap remover...

Thursday, July 14, 2016

Quantity : 50000tons - Price : 5.5~6.0

Established in 1984,is a professional manufacturer of enameled copper &aluminum wires in China. It is located in Shuanglin town, Huzhou city where is very near to Shanghai and Hangzhou. Covering an area of 150000㎡，we now have over 450 employees,with annual output 80000 metric tons...

Tuesday, July 12, 2016

Quantity : 1 - Price : Depond on profile

Material Thickness: 0.8-1.5mm Main power: 7.5KW Material: PPGI, Galvanised Coil Diameter of Axis: Depend on Profile Material Width: Depend on Profile Cutting Blade: Cr12Mov Forming Speed: 0-15m/min Cutting Type: Hydraulic Cutting Forming Sation: 16 Steps Location : , 214000 Xibei Town...

Tuesday, July 12, 2016

Material Thickness: 0.4-0.8mm Main power: 4KW Material: Galvanised Coil Diameter of Axis: Depend on Profile Material Width: Depend on Profile Cutting Blade: Cr12Mov Forming Speed: 0-15m/min Cutting Type: Hydraulic Cutting Forming Sation: 14 Steps Location : , 214000 Xibei Town, Contact ...

Sunday, July 10, 2016

Quantity : 1 pc - Price : 100usd/pc

Application Used to support wire reel when laying cable. Hold up the wire tray. Usage: for expanding the wire, the whole set of line on the six equal parts of the rolling disc, through the traction of the rotation of the wire. DP028-2: rated load 2T, thickness of bottom plate-6mm...

Sunday, July 10, 2016

Quantity : 1 pc - Price : 100usd/pc

DP011-3: Rated Load-3T, apply for drum dia 700-2100mm, application of disc width-below 1500mm, shaft diameter-60mm, weight-75kg DP011-5: Rated Load-5T, apply for drum dia 700-2400mm, application of disc width-below 1700mm, shaft diameter-76mm, weight-115kg DP011-10: Rated Load-10T...

Sunday, July 10, 2016

Quantity : 1 pc - Price : 100usd/pc

DP011-3: Rated Load-3T, apply for drum dia 700-2100mm, application of disc width-below 1500mm, shaft diameter-60mm, weight-75kg DP011-5: Rated Load-5T, apply for drum dia 700-2400mm, application of disc width-below 1700mm, shaft diameter-76mm, weight-115kg DP011-10: Rated Load-10T...

Sunday, July 10, 2016

Quantity : 1 pc - Price : 100usd/pc

Application: applied in the supporting of cable drum. With trapezoidal structure, it can be applied in different kinds of reel specification. Hydraulic lifting make it lift easily, trundles installed on the bottom make it easy to move, simple operation, secure and durable. DP011-3...

Sunday, July 10, 2016

Quantity : 1 pc - Price : 100usd/pc

DP011-3: Rated Load-3T, apply for drum dia 700-2100mm, application of disc width-below 1500mm, shaft diameter-60mm, weight-75kg DP011-5: Rated Load-5T, apply for drum dia 700-2400mm, application of disc width-below 1700mm, shaft diameter-76mm, weight-115kg DP011-10: Rated Load-10T...

Sunday, July 10, 2016

Quantity : 1 pc - Price : 100usd/pc

DP011-3: Rated Load-3T, apply for drum dia 700-2100mm, application of disc width-below 1500mm, shaft diameter-60mm, weight-75kg DP011-5: Rated Load-5T, apply for drum dia 700-2400mm, application of disc width-below 1700mm, shaft diameter-76mm, weight-115kg DP011-10: Rated Load-10T...

Sunday, July 10, 2016

Quantity : 1 pc - Price : 100usd/pc

DP011-3: Rated Load-3T, apply for drum dia 700-2100mm, application of disc width-below 1500mm, shaft diameter-60mm, weight-75kg DP011-5: Rated Load-5T, apply for drum dia 700-2400mm, application of disc width-below 1700mm, shaft diameter-76mm, weight-115kg DP011-10: Rated Load-10T...

Sunday, July 10, 2016

Quantity : 1 pc - Price : 100usd/pc

Purpose: applicable to the line of the line construction in the development and release of the disc Features: the exhibition release speed is stable, not dumping, not derailed Cable stand appearance; horizontal cable stand and a vertical cable line frame, large cable line frame...

Saturday, July 09, 2016

Material Thickness: 1.5-3.0mm Main power: 15KW Material: Carbon Steel, Galvanised Coil, Q235 Diameter of Axis: Depend on Profile Material Width: Depend on Profile Cutting Blade: Cr12Mov Forming Speed: 0-15m/min Cutting Type: Hydraulic Cutting Forming Sation: 14 Steps Location ...

Saturday, July 09, 2016

Material Thickness: 0.4-0.8mm Main power: 5.5KW Material: Galvanised Coil Diameter of Axis: Depend on Profile Material Width: Depend on Profile Cutting Blade: Cr12Mov Forming Speed: 0-15m/min Cutting Type: Hydraulic Cutting Forming Sation: 16 Steps Location : , 214000 Xibei Town...

Saturday, July 09, 2016

Material Thickness: 0.8-1.2mm Main power: 2 x11KW Material: Carbon Steel, Galvanised Coil,Q235 Diameter of Axis: Depend on Profile Material Width: Depend on Profile Cutting Blade: Cr12Mov Forming Speed: 0-15m/min Cutting Type: Hydraulic Cutting Forming Sation: 16-18 Steps Location ...

Saturday, July 09, 2016

Material Thickness: 0.3-0.8mm Main power: 5.5KW Material: PPGI,Galvanised Coil Diameter of Axis: Depend on Profile Material Width: Depend on Profile Cutting Blade: Cr12Mov Forming Speed: 0-15m/min Cutting Type: Hydraulic Cutting Forming Station: 16-18 Steps Location : , 214000...

Saturday, July 09, 2016

Main Technical Specification: Material Thickness: 0.3-0.8mm Main Power: 7.5KW Material: PPGI,Galvanised Coil Diameter of Axis: Depend ion price Cutting Blade: Cr12Mov Forming Speed: 0-15m/min Cutting Type: Hydraulic cutting Forming Sation;10-18 Steps Location : , 214000 Xibei Town...

Saturday, July 09, 2016

Quantity : 1 - Price : Depend on profile

Material Thickness: 0.3-0.8mm Main Power: 5.5KW Materrial: PPGI, Galvanised Coil Diameter of Axis: Depend on profile Cutting Blade: C12Mov Forming Speed: 0-15m/min Cutting Type: Hydraulic cutting Forming Sation: 10-18 Steps Location : , 214000 Xibei Town, Contact : Joanna Xu...

Friday, July 01, 2016

Quantity : 1 SET - Price : 10000 USD

Product name: weld seam annealing system Feature for weld seam annealing system 1.IGBT(SIEMENS) technology, high conversion efficiency; Energy saving 15%-30% , compared to SCR/KGPS technology 2.Much more efficient than gas-fired and coal-fired method 3.100% start-up success rate...

Friday, July 01, 2016

Quantity : 1 SET - Price : 10000 USD

Production Name: rolling steel heating equipment Advanced features of rolling steel heating equipment 1.High Automation.This equipment is fully automatic operation,reducing labor cost and improving productive efficiency. 2.Our medium frequency heating equipment can work 24 hours...

Friday, July 01, 2016

Quantity : 1 SET - Price : 10000 USD

Production Name: medium frequency heating equipment Advanced features of medium frequency heating equipment 1.High Automation.This equipment is fully automatic operation,reducing labor cost and improving productive efficiency. 2.Our medium frequency heating equipment can work...

Friday, July 01, 2016

Quantity : 1 SET - Price : 10000 USD

Forever Furnace is specialized in designing and producing medium frequency hardening equipment with mature induction heating technology. Medium frequency hardening equipment applications: 1)Medium frequency Hot forging furnace is used for the heating of bars and rods larger than dia 12mm...

Friday, July 01, 2016

Quantity : 1 SET - Price : 10000 USD

Forever Furnace Stainless steel pipe annealing furnace 1. High Efficiency Intelligent Fixing Fusing & Annealling Equipment, Stainless Steel Pipe Online Solution Annealing Equipment, Material Bright Annealing Furnace 2. Application: Mainly used for industrial pipe, to make it...

Friday, July 01, 2016

Quantity : 1 SET - Price : 10000 USD

Advantage of Indu ction diathermy furnace (1).High efficiency, overall efficiency up to 85%,heating fast, shorten the transition time (2).Simple ,a few minutes to learn,install,easy to move. (3).High reliability, has a unique circuit design, power module unit with the system configuration...