5MM~16MM - 5289 ads

Thursday, April 21, 2022

V-Spirit rental series include VSI indoor rental series, VSO outdoor rental series, VSF floor tile rental series. It is a new generation of smart display screen rental series. It adopts an integrated high-strength frame design, modular design of the cabinet, modular power supply....

Thursday, April 21, 2022

V-Rhea is a new generation of indoor LED screen rental with a strong frame design, the modular design of cabinets, modules and power boxes. This LED backdrop screen rental chooses black SMD1515 and dark black masks to make better effects with a low grayscale. And the rental indoor...

Thursday, April 21, 2022

Quantity : 3 million

The most common plastic card size is CR80 defined as 3.370 inches (85.6mm) wide and 2.125 inches (54mm) high. Based on it STAR TREND also offers the combo cards to accomplish one loyalty card made up of a master card plus sub cards. Customized Plastic Card Sizes for Sale Most plastic...

Thursday, April 21, 2022

Quantity : 2000sets/m - Price : 200USD-800USD

Rolling doors are available in a variety of materials. Our line of clean roll up door and counter shutters can perform in the most demanding environments. We have comprehensive types of clear plastic roll up garage doors offered with different materials such as PVC, aluminium, steel and acrylic...

Thursday, April 21, 2022

Quantity : 30pcs

Usage of Skin Stapler Instruction for Use The single use surgical skin stapler places one staple each time when the instrument is activated. The staple penetrates the skin, then forms to hold two sides of incision together. The disposable skin stapler cannot be applied directly over...

Thursday, April 21, 2022

Quantity : 30pcs

Usage of Linear Stapler Instruction for linear stapler uses The single-use GIA linear stapler is not designed, sold, or intended for use except as indicated. The disposable linear stapler and reload should not be used on tissue which would not be able to tolerate conventional suture...

Thursday, April 21, 2022

Quantity : 30pcs

Instruction for linear cutter uses The disposable linear cutter stapler places two double staggered rows of titanium staples, cuts and divides tissue between the two double rows simultaneously. The disposable linear cutter stapler should not be used on the tissues such as liver or spleen...

Thursday, April 21, 2022

Quantity : 30pcs

Usage of Laparoscopic Suction & Irrigation Cannula Instruction for Use The Single Use Laparoscopic Suction & Irrigation Cannula is designed to be used in the Minimally Invasive Surgery (MIS) procedures as multi-purpose operation tool with suction and irrigation capabilities...

Wednesday, April 20, 2022

Mesh Net for Sale The HDPE net is a food grade plastic raw material (HDPE) which is heated and melted in an extruder, extruded through a screw, and enters an extra-rotary head with a small hole in the surface of the mold. The molten plastic flows through the pores of the die to form...

Tuesday, April 19, 2022

Price : 10-30USD

Place of origin: Jinan Brand: Hongyang Model: CNC router dust shoe brush Delivery time: 1-7 days Specifications: 50mm, 70mm, 100mm, one meter, or cut your demand Material: Nylon Product details and function of cnc router dust shoe brush Product Details Width Color...

Tuesday, April 19, 2022

Price : 1000-6000USD

The paper board making machine is designed for the paper slip sheet production. This is the latest developed paper sheet production line. SANPPL-1200F line is to produce slip sheets/flat paper boards with thickness of max.5mm and width of max.1200mm. It adopts electric control system...

Saturday, April 16, 2022

Quantity : 10-1000 pc - Price : USD9,000 - USD 18,00

Zoom SWIR lens, the operating wavelength is 900-1700nm, compatible with most SWIR short wave infrared cameras. Long focal length design, suitable for long-distance observation. TECHNICAL INFORMATION OF F25-300 F2.8-32 Key Features f25-300 F2.8-32 Focal Length 25～300mm F-Number F2...

Saturday, April 16, 2022

Metal tech electric annealing furnace is one of the heat treatment equipment in mechanical industry. Which put the wire or metal parts in different heating furnaces, slowly heat them to a certain temperature, keep them for a period of time, and then cool them at an appropriate speed...

Friday, April 15, 2022

Quantity : 5000 ton/p - Price : ＞0.8USD

Stainless steel hex tubing is the general name of all section shape of steel tube except circular tube. There are welded shaped hexagon tubes and seamless shaped tubes. Due to different types of materials, hexagon steel tube generally use 304 material, because 200, 201 material strong...

Friday, April 15, 2022

Quantity : 5000 ton/p - Price : ＞0.8USD

Bright Annealed Tubes Description Annealed stainless steel tubing is a kind of high precision steel tube material after finishing or cold rolling. Due to the advantages of no oxide layer both inside and outside wall, no leakage under high pressure, high precision, high finish degree...

Friday, April 15, 2022

Quantity : 5000 ton/p - Price : ＞0.8USD

Boiler Tubes Description HUASHANG has the cold draw computing device which is 70 meters long, can produce fifty-three meters long for every pipe. With the advanced technological know-how from Korea and Japan, it makes the extra close dimension controls. HUASHANG, as a boiler tube suppliers...

Thursday, April 14, 2022

4D HIFU skin rejuvenation machine use the most advanced High-Intensity Focused Ultrasound (HIFU) technology for facial lifting, skin tightening, and body shaping. HIFU High Intensity Focused Ultrasound Machine With 6 different depth of cartridges, one shot is total 12 lines and total 25mm length...

Thursday, April 14, 2022

The 1100 sheet is industrial pure aluminum, with an aluminum content (mass fraction) of 99.00%. After anodic oxidation, the corrosion resistance can be further improved, and the beautiful surface can be obtained at the same time. Application of china 1100 aluminum sheet The application...

Thursday, April 14, 2022

1100 aluminium tube coil is usually used for products that require good forming performance and high corrosion resistance. Its strength is relatively low, and it has excellent ductility, formability, weldability and corrosion resistance. After anodizing, the corrosion resistance can...

Wednesday, April 13, 2022

Material: Aluminum plate, sus , secc ,sgcc ,spcc etc. Thickness: 2.0mm or 1.2mm，1.5mm，1.8mm ，2.0mm etc. Process: Blanking - hydraulic molding - bending - riveting - powder spraying Customized Order of Aluminum & Anodizing Enclosures Produced according to customer's drawings...

Wednesday, April 13, 2022

Price : 1000-50000USD

Duct production line 3 can drive blanking for duct. Meantime, it's very suitable for diversified production like TDF/angle steel/inserted flange forming; the angle steel flange and inserted flange can be bent into square-shaped pipe automatically. Performance features of Auto Duct...

Tuesday, April 12, 2022

The rockwool sandwich panel production line is one continuous and automatic line that integrates mechanism, electrical controlling, hydraulic system and polyurethane chemical reaction technology. The rock wool sandwich panel machineadopts advanced international roll forming technology...

Tuesday, April 12, 2022

The CNC Pipe Bending Machine is used to make a circle, curve, or spiral for workpieces. It is widely used in such fields as the petroleum industry, chemical engineering, hydroelectricity, shipbuilding, steel structure, machine making and so on. One machine can not only produce one size...

Tuesday, April 12, 2022

H beam shot blasting machine is designed and manufactured to clean the surface of the section steel. It is ideally suited for removing the rust, scale and contamination from the steel surface, which can make the surface clean, bright but with a certain coarseness. So the paint film...

Tuesday, April 12, 2022

Main structure features of EPS Panel Machine 1) This EPS sandwich panel making machine has the specification: nice appearance, low noise and high efficiency. 2) The EPS sandwich panel production line is welded by H-beam with shot blasting treatment on the surface, so the whole structure...

Tuesday, April 12, 2022

This china cut to length machine is special equipment for uncoiling, leveling, cutting and stacking the steel sheet according to the requirement of the client. It mainly consists of uncoiler, leveling system, feeding system, cutting system, conveying system, stacking system and so on...

Tuesday, April 12, 2022

Price : 100USD

Graphite Ground Wire Oxygen-free hot-dip (horizontal continuous casting process) manufacturing, copper metallurgical molecular bonding, surface hot-dip tin, no chemical corrosion and galvanic effect, does not affect cathodic protection. 1. Graphite Grounding Wire Main Performance...

Tuesday, April 12, 2022

3 FLUTE, 16MM CARBIDE END MILL, MILL CUTTER FOR ALUMINUM Grain size 0.6micron Cutting dia. 16mm Grade BT50 Shank dia. 16mm Coating No Flute length 48mm Application Slotting, side milling Overall length 100mm Workpiece Aluminum alloy Shank ground h6 As a carbide...

Tuesday, April 12, 2022

2 FLUTE, 5MM END MILL, SMALL DIAMETER CARBIDE MILLING CUTTERS Grain size 0.2-0.8micron Cutting dia. 5mm Grade BT45,BT50,BT55,BT60 Shank dia. 6mm Coating TiSiN,nACo4,TiCXCo4,nACo4-Blue Flute length 16mm Application Profiling Overall length 50mm Workpiece HRC45-65 metals, alloys...

Tuesday, April 12, 2022

2 FLUTE, 0.5 MM End Mill, SMALL DIAMETER MILL CUTTER Grain size 0.4micron Cutting dia. 0.5mm Grade BT55 Shank dia. 4mm Coating TiAlCrSiN nano coating Flute length 0.4mm Application Slotting, profiling Overall length 50mm Workpiece Copper,Copper alloy Tip Radius 0...