REQUIRED - 6779 ads

Thursday, August 24, 2023

Sensor lights, also known as motion-activated lights, have revolutionized the way we illuminate our homes, workplaces, and public spaces. With their ability to detect movement and automatically turn on and off, these lights provide a range of benefits that extend beyond mere convenience...

Thursday, August 24, 2023

“ An ounce of prevention is worth than a pound of cure！ ” Benjamin Franklin Preventive maintenance is a very important part of equipment life cycle management. Using EAMic® preventive maintenance management software, maintenance team can always arrange the preventive maintenance work in advance...

Thursday, August 24, 2023

Price : 5000-50000USD

KRD17 series is a new designed fully automatic pneumatic lifting bidirectional shock test system with high degree of automation, simple operation and convenient maintenance. It is a bidirectional vertical shock test system developed for measuring and determining the impact resistance...

Thursday, August 24, 2023

Maintenance is forever, this is the challenge for all manufacturing plants anytime anywhere. Using EAMic® CMMS manufacturing equipment maintenance software is the way to mitigate the risk of equipment failure or breakdown, increase uptime, and obtain lifecycle profit for all your...

Wednesday, August 23, 2023

Quantity : 1000tons - Price : 0.01-100 USD/PCS

Mounting Magnets Strong mounting magnets are comprised of powerful permanent magnets set inside steel cups or channels with countersunk holes or threaded features for holding applications. The steel structure redirects the magnetic field from the back-side of the magnet, making it...

Wednesday, August 23, 2023

For parts with complex structure, stainless steel 3d printing service can realize integral printing forming, avoiding mass increase and potential quality defects caused by welding forming a complex part after disassembling and manufacturing, and even canceling the assembly of complex parts...

Wednesday, August 23, 2023

3D printed nylon parts can be used for product verification or directly used as functional products. The product is 3d prototype printing with light weight and shorter production cycle. It has great application space in automobile, aerospace, art creation, medical treatment and other fields...

Wednesday, August 23, 2023

In the process of turntable slewing bearing use, it will endure 3 different direction force, including the axial force Fa, the radial force Fr and the overturning moment M. The combination of the three loads will change as a result of different working ways and different structural...

Wednesday, August 23, 2023

The Welinktech Connector Assemble Machine is a cutting-edge device designed to create a range of connectors for various industrial applications, including electrical, coaxial, and fiber optics. The machine uses automated processes to combine components like pins, sleeves, and sockets...

Wednesday, August 23, 2023

Heavy-duty industrial application FEATURES With Max. 10 x 50 kW PV String Inverter 250 kW Transformer Integrated 500 kW Transformerless Separate STS / Cabinet Required AC-Coupled Solution With Max. 10 x 50 kW PV String Inverter 250 kW Transformer Integrated 500 kW Transformerless...

Tuesday, August 22, 2023

Price : US$1.00

Introduction of car ignition coil Winding and potting are the key processes in the production of ignition coils. MAPMS has multiple automatic winding machines realize automatic winding of primary coil and secondary coil. Vacuum at 100pa for 2 minutes to ensure that the air in the...

Tuesday, August 22, 2023

3D printing is a technology that builds objects based on digital model files, using bondable materials such as powdered metal or plastic, and printing them layer by layer. The printed content comes from 3D models or other electronic data, and the printed 3D objects can have any shape...

Tuesday, August 22, 2023

TCI 301 MS is a Binocular Iris Capture Module with the function of iris image collection and processing. With compact size and simple structure, it is ergonomic, easy to use and suitable for all kinds of people. Compatible with USB and providing standard customized development interfaces...

Tuesday, August 22, 2023

Quantity : 10000000pc - Price : 8-80/pcs

Zinc oxide arrester, otherwise known as a metal oxide surge arrester, is an electrical device used to protect electrical equipment from overvoltages and transients. The metal oxide surge arrestor is preferred over other technologies since it provides better energy handling capacity...

Tuesday, August 22, 2023

Quantity : 10000000pc - Price : 8-80/pcs

Most of the crawler production operations are completed by rubber vertical injection machines instead of manual labor, reducing the quality instability caused by manual errors. The life of rubber tracks produced by mold-locking vulcanization unit and automatic tensioning steel strip...

Tuesday, August 22, 2023

Price : $8.00-$300.00/pc

An electro-hydraulic flow control valve electronic, also known as an electro-proportional control valve or simply an EPV, is a type of valve that uses electrical signals to control fluid flow rate or pressure. It operates based on the principle of proportional control, where the...

Tuesday, August 22, 2023

Price : $8.00-$300.00/pc

Directional check valves are hydraulic valves that allow fluid to flow in one direction and block it in the opposite direction. They are designed to prevent fluid from flowing back through a hydraulic system, which can cause damage to equipment. one direction water valve typically...

Tuesday, August 22, 2023

Price : $8.00-$300.00/pc

A cross sequence valve is a type of hydraulic valve used to control the sequence of operations in a hydraulic system. It is designed to allow the flow of hydraulic fluid to a secondary circuit or actuator only when a predetermined pressure is reached in the primary circuit. Direct...

Tuesday, August 22, 2023

Price : $8.00-$300.00/pc

Direct acting pressure relief valve, also known as direct-acting pressure relief valves, are hydraulic valves that are designed to relieve excessive pressure in a hydraulic system. They operate based on the principle of direct pressure sensing and actuation. 2500 psi hydraulic pressure...

Tuesday, August 22, 2023

The transparent screen of the rear window is not only beautiful but also has complete functions. It has the characteristics of wide distribution, high information transmission rate, and is not limited by time and space. It has become a new media for advertising information dissemination...

Tuesday, August 22, 2023

A 120 case fan is a type of fan with a diameter of 120mm, commonly used in electronic cooling and ventilation applications, as well as computer systems. These fans are designed to operate on low voltage DC power, and feature a brushless motor for high efficiency and low noise operation...

Tuesday, August 22, 2023

As a leading printing consumables manufacturer with over 42 years of experience, Print-Rite is dedicated to delivering innovative, patent-safe, high-quality, and eco-friendly products. Our consumables are designed to meet the most rigorous safety standards, ensuring that you can print...

Friday, August 18, 2023

ECT32 pass-through metal connectors have a simple structure and high reliability. They integrate the contacts into the housing and the contact retention mechanism in one piece, which greatly simplifies the connection. The contact retention mechanism and contact interface are made of copper...

Friday, August 18, 2023

Swiss machining is a specialized type of precision machining that involves the use of a sliding headstock lathe to produce intricate parts with high accuracy and tight tolerances. This process is particularly well-suited for small, complex parts that require multiple operations...

Friday, August 18, 2023

Is Brass Easier to Machine than Copper? Copper is a soft, malleable metal that is an excellent conductor of electricity and heat, which makes it suitable for use in a wide range of industries, including electronics, aerospace, and automotive. Brass cnc machining parts is an alloy...

Friday, August 18, 2023

Aluminum is a popular material for Swiss machining due to its excellent strength-to-weight ratio, corrosion resistance, and versatility. At Falcon, we utilize Swiss type lathes to achieve incredibly precise tolerances and complex shapes. Our aluminum machining services are highly...

Tuesday, August 15, 2023

Customers only need to send us the CAD files of the laser marking aluminum black and laser marking silver design, and we can mark on the surface of the required material.Our custom laser marking machine is suitable for marking all kinds of metal surfaces and most plastic surfaces...

Saturday, August 12, 2023

Gas Regulator Connector used in conjunction with a cylinder valve to deliver an unreduced pressure required for operation of torches burners and furnaces for commercial and industrial applications. PRODUCTS Gas Regulator Connector Types There're numerous types of Gas Regulator Connector...

Saturday, August 12, 2023

Features of Heat Moisture Exchanger (HME) The HMEs include a hygroscopic membrane that traps a patient's moisture, providing effective airway humidification. HME exchange media treated with calcium chloride, a substance generally recognized by the FDA as safe for this use. Designed...

Saturday, August 12, 2023

Features of Heat Moisture Exchange Filter(HMEF) The range of heat and moisture exchange filters (HMEFs) combine the filtration efficiency of dedicated breathing filters with optimum moisture return. Designed with a low resistance to airflow to allow easier breathing for the patient...