MODULUS - 702 ads

Thursday, December 15, 2022

Our company uses high-quality raw materials, coupled with advanced production technology, with more than 20 years of belt production experience, our products with high efficiency, low elongation, flexible and high fatigue resistance, good antistatic property, the friction coefficient...

Friday, December 09, 2022

ABS resin is a terpolymer composed of acrylonitrile, butadiene and styrene. ABS has the rigidity, chemical resistance and heat resistance of polyacrylonitrile, the appearance and dimensional stability of polystyrene, and the cold resistance and impact resistance of modified polyethylene...

Friday, December 02, 2022

Price : USD 2500/T to USD 35

The aluminium frames around the solar panel is an important but often ignored component of a solar panel. Aluminium profile solar panel frame and mounting bracket are normally used to seal and fix solar battery components. As one of the important industrial aluminium profiles produced by Otalum...

Friday, November 11, 2022

420J2 stainless steel strip belongs to the Japanese standard martensitic stainless steel, the implementation standard: JIS G4303-2005. 420J2 This steel has good mechanical processing performance. After heat treatment (quenching and tempering), it has excellent corrosion resistance...

Friday, November 11, 2022

420j2 stainless steel, also called 3Cr13 steel, is martensitic stainless steel, used after quenching and tempering. Compared with 1Cr13 and 2Cr13 steel, 420J2 stainless steel has higher strength, hardness and hardenability, but its corrosion resistance and thermal stability below...

Friday, November 11, 2022

The new grade of 316TI stainless steel sheet is 06Cr17Ni12Mo2Ti. 316TI is to add Ti to SUS316 steel to improve the resistance to intergranular corrosion. 316Ti corrosion-resistant stainless steel sheet is widely used in chemical, food, medicine, paper, petroleum, atomic energy and...

Wednesday, October 19, 2022

PEEK Teeth R&D Series has good wear resistance and high mechanical strength. It is mainly used in dentistry in medical field. Specification of Peek Dental Prosthesis R&D Series Material Properties Test Method Conditions Units 770G Mechanical Data Tensile Strength ISO 527 B reak...

Wednesday, October 19, 2022

PEEK-GL series, is a glass fiber composite modified peek plastic materials, currently available from 5% -35% of different mass fractions of reinforced materials. Compared with pure resin particles, it has better rigidity, better creep resistance and dimensional stability. Types...

Friday, October 14, 2022

High-performance and high-precision machining center The bed and the column are cast in one piece of mineral materia The headstock adopts an approximate square ram structure Our five axis machining center mainly include bridge 5-axis machining centers and vertical 5-axis machining centers...

Thursday, August 18, 2022

Building decoration materials, also known as building finishing materials, refer to the materials laid or painted on the surface of buildings to decorate and beautify the environment. Building decoration materials are the important material basis of building decoration engineering...

Friday, August 12, 2022

Quantity : 50000-8000 - Price : 8-15USD

GCYFXTY air blown fiber optic cable is a loose tube made of a high modulus material with a 250µm single-mode or multi-mode fiber. The tube is filled with a non-toxic and harmless waterproof compound, and the loose tube is twisted with a non-metallic reinforcing element. Then extruded...

Friday, August 12, 2022

Price : RMB300000-RMB3000000

RSM3/3 series glass fibre and carbon fibre multi axial warp knitting machine developed by Changzhou Run Feng Yuan Textile Machinery Manufacturing Co., Ltd. can bind warp knitting coils to warp, weft and oblique lining yarns through binding yarns to form multi-layer composite fabrics...

Tuesday, July 19, 2022

VL series vertical machining center is a small and medium-sized vertical machining center designed by Germany and made in China. It mainly aims at the milling of automobile aluminum hubs, completing drilling, complex surface machining, and other processes; This product can also be...

Tuesday, July 19, 2022

High-performance Milling Provides professional solutions for different services Our china vertical machining center mainly include vmc machining centerand VL two series, VMC series include VMC50B,VMC50C, VMC60B, VMC60C, VMC70B, VMC70C. The structure of vertical machining centers...

Friday, July 15, 2022

JWELL Extrusion Machinery Co., Ltd is one of the leading hdpe blow molding machine manufacturersand blow molding machine suppliers in China. The HDPE blow molding machine, also called HDPE blow moulding machine, is mainly used for processing unsupported parisons. The advantages of...

Thursday, July 14, 2022

Quantity : 150000 ton - Price : USD 2500/T to USD 35

The aluminium frames around the solar panel is an important but often ignored component of a solar panel. Aluminium profile solar panel frame and mounting bracket are normally used to seal and fix solar battery components. As one of the important industrial alu solar profile produced by Otalum...

Saturday, July 09, 2022

Reinforced with 20% of glass fiber on substrate PA66 is called PA66 GF20, it improves dimensionally stabilized and impact resistance for injection moulding. Typical Application of PA66 GF 20 (A2000D) PA GF20 is applied to various precision gears due to its high rigidity, dimensional stability...

Saturday, July 09, 2022

Pa6 6 gf15 is Nylon66 and 15% Glass-Filled, these materials are performed with medium stiffness and strength but it has much better mechanical properties over unfilled granules. Reinforced with 15% of glass fiber and modified Nylon 66 in Anmei plastic plant combined with other property...

Saturday, July 09, 2022

Transparent ABS, also called MABS plastic material, which has excellent transparency, impact toughness and good processing properties. The light transmittance of transparent ABS is about 88%, second only to PMMA (91%) and PC (90%). The main manufacturers of this MABS plastic material...

Saturday, July 09, 2022

PC-ABS is a blend of PC and ABS. If the two materials are simply mixed and then injected directly, the effect is very poor, and delamination will occur. The advantages of PC are rigidity and toughness, but the disadvantages are stress cracking and high viscosity. The advantage of...

Saturday, July 09, 2022

Pa6gf50 is a fiber reinforced plastic made of nylon 6 resin as a base material and 50% glass fiber as a reinforcing filler, and various processing aids be added. Typical Application of PA6 GF50 (A1011J) PA GF50 is used to manufacture high-strength and high wear-resistant structural...

Saturday, July 09, 2022

Polyamide 6 reinforced with 45% Glass Fibers that is PA GF45, medium viscosity and dimensional stability, this material pa 6 has excellent rigidity and high tensile and compressive strength successfully applying to engineering structure parts of mechanical engineering and in the automotive...

Thursday, July 07, 2022

Name: Weather-resistant Adhesive For Neutral Curtainwall Feature: GS885 is one component, neutral clear silicone . It curing quickly, high adhesive strength and high modulus. It has good compatibility with another neutral silicone sealant. Packing Specification Plastic packaging, 300ml/tube...

Thursday, July 07, 2022

Silicone sealant is a part of silicone products. It is mainly divided into deacetic acid type, deic type, deamination type and oxime type. Silicone sealant is also known as glass glue because users buy silicone sealant is mainly used in glass bonding and sealing. The chemical composition...

Wednesday, June 29, 2022

CVD chemical vapor deposition diamond. The mixture of carbon-containing gas and oxygen is excited and decomposed at a high temperature and a pressure lower than the standard atmospheric pressure to form an active diamond carbon atom, and the deposit is alternately grown on the substrate...

Friday, May 27, 2022

Quantity : 1-200 Ton

Anti-pollution Flashover Coating (RTV) High Voltage Insulator Coatings (HVIC) To prevent the electrical equipment from pollution flashover in humid climate; Free of surface maintenance and cleaning after coated. Features of RTV High Voltage Insulator Coating: 1. Excellent hydrophobicity...

Wednesday, May 25, 2022

Quantity : 1000Kgs - Price : USD1~2000/Kg

Bis 3 trimethoxysilyl propyl amine SiSiB® PC1118 is a secondary aminofunctional silane possessing two symmetric silicon atoms. SiSiB® PC1118 may act as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics...)

Wednesday, May 25, 2022

Quantity : 1000Kgs - Price : USD1~2000/Kg

Bis 3 triethoxysilyl propyl amine SiSiB® PC1108 is a yellowish liquid with an amine-like odor. It is the equivalent of Evonik's Dynasylan 1122. SiSiB® PC1108 amino silane may act as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic...

Wednesday, May 25, 2022

Quantity : 1000Kgs - Price : USD1~2000/Kg

Hydrolysate of 3-Aminopropyltriethoxysilane SiSiB® PC1106 is an aqueous solution of 3 Aminopropylsilanetriol. SiSiB® PC1106 hydrolysate is an amino-functional silane which acts as an adhesion promoter between inorganic materials (glass, metals and fillers) and organic polymers (thermosets...)

Tuesday, May 10, 2022

Stainless steel strip is simply and extension of the ultra-thin stainless steel plate. It mainly a narrow and long plat strip stainless produce to meet the needs of different industrial sectors for the industrial production of various types of metal or mechanical products. 316Ti Stainless...