FIBER，HANDPIECE - 7150 ads

Tuesday, May 30, 2023

GXF series optical cross-connection cabinet has four models: GXF-A GXF-B optical cross-connect cabinets. This series optical cross-connection cabinet is mainly made up of Stainless Steel or SMC case, fixing elements of the case frame, cable fixing and protective device, direct welding module...

Tuesday, May 30, 2023

TK Dead-end Guy Grips The specific model name of this product is determined by the specifications, such as AT020133, "A" refers to ADSS optical cable, "T" refers to the type, "020" refers to the span, "133" refers to the cable diameter mm. Dead end guy grip or preformed guy grip is...

Tuesday, May 30, 2023

Fiber to the home (FTTH) is the ultimate development goal of broadband access, and the TLMOR21039D mini optical receiver is the end product to meet this goal. This fiber receiver adopts low-power light-receiving technology to meet the needs of FTTH fiber-to-the-home CATV reception...

Tuesday, May 30, 2023

TLMOR21030D is a new and practical product developed for the special needs of the cable TV industry. It caters to the passive terminal receiving equipment of the all-optical network transmission fiber-to-the-home, and successfully realizes the wired analog/digital TV signal to the home...

Tuesday, May 30, 2023

TLM-N2-16A is a 16 cores optical fiber terminal box, the body of which is made of 70% PC and 30% ABS. The 16 core fiber optic distribution box has the advantage of high-pressure resistance and corrosion resistance. The biggest feature of this 16 core FTTH fiber optic terminal box...

Tuesday, May 30, 2023

TLM-B07 drop tlm cable protection box is a case to put in a flat cable with a thermal protection tube after hot melting so that the splice spot can get better protection. Relative to cold welding, the hot one can improve the optical performance of connectors, make the effective connection...

Tuesday, May 30, 2023

Planar Lightwave circuit (PLC) splitter is a sort of optical power management device produced using silica optical waveguide technology and offers a low cost solution for optical signal distribution. It has low insertion loss and polarization dependent loss, miniature size, wide operating...

Tuesday, May 30, 2023

With more than 20 years of experience, T&S always provides high-quality fiber optical splitters that meet your needs and promote efficient, cost-effective network expansion. Whichever splitter type you choose, you can trust its ability to function at a high level. We lab test...

Tuesday, May 30, 2023

Except traditional connector assembly like LC, SC, MU, FC, ST, E2000, etc., we keep in cooperation with top suppliers for new connector assembly technology enhancement, for example, CS, SN, MDC connector for new applications. Standard Fiber Optic Cable Patch Cord Fiber Patch Cord...

Tuesday, May 30, 2023

FBT Coupler is a type of splitter which is based on fused biconical taper technology. The technology is widely accepted and adopted in the PON solution. FBT or fused biconical taper is a traditional technology that two fibers are twisted and fused together under high temperature while...

Tuesday, May 30, 2023

At T&S, as one of optical transceiver manufacturers, we supply a wide range of fiber optical transceivers for network, server and storage systems. Optical transceiver we supply are fully compatible with original manufacturer hardware. All products are subject to in-depth qualification...

Tuesday, May 30, 2023

Fiber Patch Cord or jumper is a fiber cable that has fiber connectors terminated on one or both ends. General use of these cable assemblies includes the interconnection of fiber cable systems and optics-to-electronic equipment. - a quality fiber optic patch cord factory, T&S...

Tuesday, May 30, 2023

At T&S, we supply a wide range of fiber optic transceivers for network, server and storage systems. Optical transceiver we supply are fully compatible with original manufacturer hardware. All products are subject to in-depth qualification and testing to ensure that it will perform...

Tuesday, May 30, 2023

Fiber Patch Cord or jumper is a fiber cable that has fiber connectors terminated on one or both ends. General use of these cable assemblies includes the interconnection of fiber cable systems and optics-to-electronic equipment. - a quality fiber optic patch cord manufacturer, T...

Tuesday, May 23, 2023

Quantity : 1000 sets/ - Price : USD 500~50000

JKZ Induction Heating has been engaged in the manufacturing of induction heating machines for nearly 30 years. At present, there are currently more than 10,000 JKZ induction heater machine working all over the world. Based on the principles of induction technological updates and customers' needs...

Tuesday, May 23, 2023

This kind of steel fiber is made of high-speed wire, when you add it to concrete, which can improve the toughness, bending and tensile strength, shear strength, shock resistance, cracking resistance, and permeability of concrete. Thus, steel fiber concrete is essentially different...

Tuesday, May 23, 2023

Micro brass fibers are made of copper coated steel wire, which is the most important materials of RPC and UHPC. UHPC has the features of very high strength, high tenacity, very good durability, and volume stability. It is a good and a new kind of construction materials. Copper micro...

Tuesday, May 23, 2023

Hooked end steel fibres are made of high-quality cold drawn steel line, in order to make sure that it has high tensile strength and animal tolerance. And the steel fiber in bulk ensures the mixing fast and convenient, and the distribution homogeneous. During pulling from the cement...

Tuesday, May 23, 2023

Glued hooked end steel fibre is made of high quality cold-drawn wire. The glued steel fiber in bulked could make sure it has good dispersibility in concrete. Compared with general concrete, steel fibre concrete has a great improvement in tensile strength, flextural strength, abrasion resistance...

Tuesday, May 23, 2023

There are many types of steel fibre used in concrete. The steel fiber for concrete reinforcement is a new kind of metal material, in order to enhance concrete with metal fiber and shotcrete in its hardened state. Tengzhou SDS steel fiber make concrete have extremely high flexural...

Tuesday, May 23, 2023

There are many types of steel fibres used in concrete. The steel fiber for concrete reinforcement is a new kind of metal material, in order to enhance concrete with metal fiber and shotcrete in its hardened state. Tengzhou SDS steel fibers make concrete have extremely high flexural...

Tuesday, May 23, 2023

MEI SU's variable time-dalay switch is a kind of fiber delay line with switching feature. This kind of fiber optic delay line normally includes several fiber coils of different length. This type of fiber switch is used to selecting different fiber coils to get different delay time...

Tuesday, May 23, 2023

Special Fiber Components Products The only thing constant in the world is change itself. As a professional manufacturer with over 20 years of experience on passive optical components, MEISU always pay attention to the development trend of industries and tailor different types of fiber...

Tuesday, May 23, 2023

PM Fiber Optic PLC Splitter PM fiber optic PLC Splitter is composed of a PLC chip, an input fiber array and an output fiber array. Normally, the PLC optical splitter can split the input power evenly while keeping the states of polarization unchanged. Thus, it is mainly used in fiber...

Tuesday, May 23, 2023

PM fiber patch cord is an important connection device to transmit polarization-maintaining optical signal and meanwhile, keep its polarization state unchanged. PM Patch Cord Features IL<0.3dB</span> ER>23dB Key orientation: Any Multiple options for connector type How...

Tuesday, May 23, 2023

Quantity : 100 - Price : USD100-100000

Designed for 100G Ethernet and OTU3 links over single-mode fibers, the Sintai 100G QSFP28 single-mode optical transceivers use LWDM wavelengths (1295.56nm, 1300.05nm, 1304.58nm, 1309.14nm) and support transmission distance up to 10km. 100G QSFP28 Single Mode Transceiver Feature...

Tuesday, May 23, 2023

PM MPO patch cord is a kind of multi-core PM fiber that is fanned out and connected to MPO pm fiber connector. Normally, this kind of MPO jumper can transmit multiple polarization-maintaining optical signals and keep their polarization orientation unchanged at the same time. PM MPO...

Tuesday, May 23, 2023

Quantity : 100 - Price : USD100-100000

The integrated WDM System offers 1U 48X10G→480G System and 1U 12X100G→1.2T System which supports single-channel access rate up to 10 Gbit/s and adaptive access to all types of services at rates of 10 Gbit/s or lower (like FE/GE/10GE LAN, 10GE WAN, STM-1~64, etc.) and 40GE, 100GE,...

Tuesday, May 23, 2023

MEISU's polarization maintaining optical fiber array is a row of PM fiber of any specified orientation (error< 3 degree). The most common orientation of this polarization maintaining fiber alignment is slow axis horizontal, vertical or 45 degree tilted. PM FAU is normally used...

Tuesday, May 23, 2023

Quantity : 100 - Price : USD100-100000

Designed for 100G Ethernet and OTN OTU4 links over duplex single-mode fibers, the Sintai 100g cfp2 transceiver support transmission distance up to 10km using LWDM wavelengths (1295.56nm, 1300.05nm, 1304.58nm, 1309.14nm). 100G CFP2 Single Mode Transceiver Feature Adopt CFP2 hot-swappable...