HARDNESS - 3497 ads

Saturday, July 02, 2022

Mould Slide The mould slider is a mold component that can slide in a certain angle perpendicular to or with the opening and closing direction during the opening and closing action of the mold. Features of Mould Slide When the product structure makes it impossible for the mold to demould...

Saturday, July 02, 2022

Mould Component Mould Components are also a part of the mould. GM-TECH not only produces precision moulds but also provides customers with high-precision, low-cost mould parts. For example mould cores, inserts, sliders, lifter, wear plates, ejector pins, etc. Usually, processing accuracy...

Thursday, June 30, 2022

Fig 2202 Hammer Union Working Pressure: 15,000 psi(1034 bar) Features: Meets National Association of Corrosion Engineers Standard MR-01-75 and American Petroleum Institute RP-14E Heat-treated components are 100% tested for hardness Fluoroelastomer seal rings Butt-weld only Stamped...

Thursday, June 30, 2022

Price : 100USD

OVERVIEW OF COLD ROLLED STEEL COIL Cold rolled carbon steel coil is a type of steel that has been passed through a rolling mill below its recrystallization temperature from 400℃ to 700℃. Recrystallization of steel is a microstructural phenomenon that is achieved by heating on the...

Wednesday, June 29, 2022

Diamond Wire Drawing Die Blanks E-Grind is one of professional PCD wire drawing dies suppliers and diamond dies manufacturers, we provide two series of Diamond Wire Drawing Die Blanks: CDB Series and TDBY Series. 5 grades of grain size available: 3 microns, 5 microns, 10 microns,...

Wednesday, June 29, 2022

Synthetic industrial diamond powder has the characteristics of high thermal stability, high chemical stability, good conductivity, good physical properties (high compressive strength, good heat dissipation, strong corrosion resistance, low thermal expansion rate) and so on. It has...

Wednesday, June 29, 2022

CVD chemical vapor deposition diamond. The mixture of carbon-containing gas and oxygen is excited and decomposed at a high temperature and a pressure lower than the standard atmospheric pressure to form an active diamond carbon atom, and the deposit is alternately grown on the substrate...

Wednesday, June 29, 2022

Boron Nitride Powder for Sale The solid cbn has a molecular formula of BN. Its atomic structure is similar to the structure of carbon atoms in diamond. Therefore, it has high-density characteristics, hardness is slightly lower than that of diamond, and its hardness is second only...

Wednesday, June 29, 2022

CBN ranks the second in hardness following Diamond. CBN has premium performance in thermal conductivity, durability and chemical inertness. It is usually used for Ferrous Metal. E-Grind provides all types of CBN material including mesh and micron. Key Feature of Different Types of...

Wednesday, June 29, 2022

Quantity : 1000 set - Price : USD 700

Huatao Group - Corrugator Belt & Spare Parts Web: www.htwirebelt.com www(dot)htwirebelt.com Email: maple@huataogroup.com maple(at)huataogroup.com Tel: 0086 133 0311 0583 WhatsApp: 0086 133 8311 0583 Description: Tungsten Carbide Corrugating Rolls of Single Facer Machine are...

Tuesday, June 28, 2022

Quantity : 1000 - Price : USD 700

Huatao Group - Corrugator Belt & Spare Parts Web: www.htwirebelt.com www(dot)htwirebelt.com Email: maple@huataogroup.com maple(at)huataogroup.com Tel: 0086 133 0311 0583 WhatsApp: 0086 133 8311 0583 Description: Tungsten Carbide Corrugating Rolls of Single Facer Machine are...

Friday, June 24, 2022

Wet ball mill is a kind of energy-saving ball mill equipment which adopts rolling bearings and has high efficiency. Wet grid mining ball mill processing capacity can reach 160 tons per hour. It usually grinds coarser ores. Instruction of Wet Grid Ball Mill The operating environment...

Friday, June 24, 2022

CIC is a more than 30-year manufacturer and reputed supplier of thrust roller used in rotary kilns, rotary type driers and so on. CIC has been specialized in design, producing whole set of rotary machinery, so also has rich experience in supplying support device, such as thrust roller...

Friday, June 24, 2022

CIC is a more than 30 years manufacturer and reputed supplier of support roller used in rotary kilns, rotary type driers and so on. CIC has been specialized in designing, producing whole set of rotary machinery, so also has rich experience in supplying support device, such as support roller...

Wednesday, June 22, 2022

Price : 100USD

Large Metal Spinning Spinning in sheet metal belongs to the processing of local continuity, the instantaneous deformation zone is small, and the total deformation force is small. Some parts with complex shapes or materials that are difficult to deform are difficult or even impossible...

Wednesday, June 22, 2022

Price : 5000USD-30000USD

Custom Mold & Design The overmolded parts is a process that can bond different materials by the injection moulding. Plastic injection overmolding in HanKing is a technology to combine two different moulds while we called the combination of different resins in one mould as two-shot...

Wednesday, June 22, 2022

Quantity : 1200sets/y - Price : USD10000-200000

Our edm hole drilling machine for sale are designed for the highest levels of accuracy, incredible reliability and high quality. Increasing productivity and saving time, small hole die sink edm machine provided by us is your best choice for drilling small hole. Come and contact...

Tuesday, June 21, 2022

Non-woven polypropylene fabric, or the so-called PP non-woven fabric, is a non-toxic, odorless, milky white highly crystalline polymer. It is one of the lighter types of plastics, with low water absorption and good form-ability. The surface of the non-woven polypropylene fabric...

Saturday, June 18, 2022

Sihoo V1 Ergonomic Comfortable and Stylish Adjustable Recliner Executive Office Chair The design of sihoo v1 chair has thoroughly studied the relationship between people and sitting, combined with healthy sitting posture and ergonomics, extending the sihoo v1 chair. The overall design...

Saturday, June 18, 2022

Sihoo M97B High Back Mesh Ergonomi Chair with Comfortable Headrest and Back Support 1. 3D armrest; 2. Aluminum alloy bracket; 3. Retractable pedal; 4. Lumbar support and backrest are separated; 5. High elasticity breathable mesh; - SGS, BIFMA certified gas spring. Component Material...

Saturday, June 18, 2022

Needle roller bearings use needle rollers as their rolling elements rather than balls. The term "needle roller" usually means that its length is several times its diameter. Needle roller bearings have a smaller cross-sectional height and could keep the entire machine lighter and more compact...

Saturday, June 18, 2022

Quantity : 10000pcs - Price : ¥8--¥1000

Carbon steel wire refers to very high strength and hardness. Compared to other steel wire, its cutting ability of diamond cup brush and cup steel brush is stronger, but the toughness will be slightly less. However, the carbon steel wire itself has a lower cost, so the price of this...

Saturday, June 18, 2022

Quantity : 10000pcs - Price : ¥8--¥1000

Brass coated wire brush, the texture of copper wire is softer than steel, suitable for processing the workpiece with low hardness, removing the surface coating of the workpiece, rust removal and other purposes. And the metal activity of brass is low, has a certain corrosion resistance...

Friday, June 17, 2022

Price : 1-10usd

Diamond Custom Glitter Enamel Pins LITTLE KNOWLEDGE ABOUT MEDAL MAKING Metal medals are well-made, and can be divided into medals and medal plates according to different shapes. Common medal materials are made of aluminum, iron, zinc alloy, copper, gold, silver and other materials...

Thursday, June 16, 2022

Quantity : 400 sets/y - Price : $30000~300000/set

Mixing Modification of Elastomer——Blending Modification of SBS/SEBS Applications of Thermoplastic Elastomer: The English acronym of thermoset extrusion is TPE. In the Chinese market, TPE refers to SBS/SEBS blending modification materials. Because SBS/SEBS elastomer usually has a high...

Thursday, June 16, 2022

Quantity : 400 sets/y - Price : $30000~300000/set

For some materials such as elastomers with low hardness or easy adhesion, it is recommended to use a water ring pelletizer for granulation. After extrusion from the template, the material is cut into particles directly and mixed with centrifugal force and cooling process water. Finally...

Wednesday, June 15, 2022

Product characteristics 1. Silicone rubber materials: Epoxy encapsulation, Multi-Hardness 2. Cost-effective 3. Surface: texture, metallic colors 4. Silicone key height： 15mm or more 5. Can be molded with conductive pills, assembled with polyester or metal dome arrays for electrical...

Tuesday, June 14, 2022

Product description Blind flange is also called blind board, and its proper name is flange cover. It is a flange without holes in the middle for sealing the pipe plug. There are many types of sealing surface, such as rise face, ring joint face, large or smalltongue face and groove face...

Tuesday, June 14, 2022

Product description Steel tubing caps, also known as end cap, plug, cap, pipe cap, stuffy head, welded in the end of the pipe or installed on the outside thread of the end of the pipe to cover the pipe plugging fittings. It is used to close the pipeline and has the same function as pipe plugging...

Tuesday, June 14, 2022

Product description We are a stub end manufacturer, supplier and exporte, stub end divided into Europe system, Japan system, America system and lap Joints. ASME/ANSI B61.9 for long type stub end, MSS SP 43 for short stub end. HG20621 for short stub end, GB9118 1TYPE for long stub end...