RESIN - 4576 ads

Friday, September 02, 2022

Number of layers: 10 Surface finish: ENIG Aspect Ratio: 8: 1 Base material: FR4 Outer Layer W/S: 4/4mil Inner layer W/S: 5/3.5mil Thickness: 2.0mm Min. hole diameter: 0.25mm Special process: Impedance Control, Resin Plugging, Different Copper Thickness Advantages Of 10 Layer Impedance...

Friday, September 02, 2022

Via In Pad fr4 pcb board, using copper plating or epoxy to fill holesfor circuit board factor, prevent solder paste or flux from flowing into the via in pad, avoid solder ball getting into via or solder mask cover on pad and cause false soldering. HUIHE CIRCUITS Via In Pad PCB has...

Thursday, September 01, 2022

PA 66 GF 15 is a 15% glass fiber reinforced, heat-resistance, polyamide 66 resin for injection molding. PA66 GF15 Storage and Handling PRE-PROCESSING： Pre-drying: 4-6h / 130°C Processing: Melting temperature 280 - 300 °C Mold temperature 60 - 100 °C Product storage and handling:...

Thursday, September 01, 2022

Using polyamide 66 as the basic resin, the tensile strength of nylon 66 is obtained by blending and modifying with the addition of a toughening agent. The flexural strength, abrasion resistance and creep resistance of Nylon 66 are very outstanding. What is the tensile strength of...

Saturday, August 27, 2022

Features of Metal Seated Gate Valve The stem is permanently sealed by three independent seals, and if the seal wears out after long use, the gland bolts only need to be tightened; Stem spherical stop-thrust, low friction resistance, so that the valve is light to open and close, low...

Thursday, August 25, 2022

Quantity : 500000 Pie - Price : US $1 - 3,000 / Set

What is a Wafer Check Valve? Wafer check valves are in-line piping valves used to control fluid flow direction and reduce or fully prevent possible back flow within plumbing systems. Wafer check valves are also known as clack valves, reflux valves, non return valves and one way valves...

Wednesday, August 24, 2022

7CF® Benzene-free Spray Paint is a quick-drying benzene-free thermoplastic acrylic resin aerosol paint. It is made of special acrylic resin, pigment additives and solvents free of benzene and toluene, combined with advanced production technology. Various raw materials have undergone...

Wednesday, August 24, 2022

7CF® Crystal Wax Car Polish is a high-quality super deep care crystal emulsion made of advanced formula and special resin. Automotive crystal wax's special polyester emulsion can penetrate the very fine patterns on the paint surface, which not only effectively removes stains but also...

Saturday, August 20, 2022

Resin bond microndiamondis made from Diamond Resin Bond Mesh. It has a multi-crystalline structure, rough surface, and uniform shape. The sharp edges always generate during cutting, grinding, lapping, and finishing. With such unique characteristics, Diamond Resin bond micron provides...

Saturday, August 20, 2022

Each Particle is with sub-crystal structure. Irregular and Very rough surface. New cutting edges come out during working. Also available in electroless plating of both nickel (30% and 56% by wt.) and copper (50% by wt.) allowing for better crystal retention in both phenolic and polyimide...

Saturday, August 20, 2022

Price : 1000-6000USD

Product Description of 33KV Series Cast Resin Dry Type Transformer The dry type transformer is called an epoxy resin dry type transformer dry type cast resin and uses epoxy resin as an insulating material. The high and low voltage windings are made of copper strip (foil). The epoxy...

Saturday, August 20, 2022

Price : 1000-6000USD

ZJYB main types of power distribution transformers are oil immersed power transformer, epoxy resin dry type transformer, combined transformer substation, etc. Advanced testing and inspection equipment, strict production process and perfect testing and inspection process are the powerful...

Thursday, August 18, 2022

Building decoration materials, also known as building finishing materials, refer to the materials laid or painted on the surface of buildings to decorate and beautify the environment. Building decoration materials are the important material basis of building decoration engineering...

Wednesday, August 17, 2022

Quantity : 1 set - Price : 5000USD-30000USD

Two Shot Tool Construction Part two shot tool construction saves the injection machine quantity and plant area, lower the labor cost and minimize the part handling, although mould cost is high but later process cost is lower, not on... Two Shot Plastic Injection Molding Parts How...

Wednesday, August 17, 2022

Quantity : 1 set - Price : 5000USD-30000USD

Injection Plastic Mold Injection plastic mold is another name for plastic injection mold. This is just how people in various places call injection molds differently. The injection plastic mold can be made as single cavity plastic mold or multi cavities injection mold according to...

Friday, August 12, 2022

Quantity : 1000

Soxi is one of the top plastic material dryer manufacturers, our plastic drying machine will avoid the following questions. In the plastic auxiliary machinery, the plastic in the resin state easily absorbs moisture from the air. In another word, the moisture absorbed during storage...

Thursday, August 11, 2022

Quantity : 100WDay - Price : $0.01-0.1

Extra Absorbent Diapers, Ultra Thin Diaper The key to the quality of the more absorbent diapers at stake is the mechanism by which the diaper handles urine. To put it plainly, it is the diaper's adsorption power and the method of handling urine after adsorption. This issue seems to...

Thursday, August 11, 2022

Quantity : 100WDay - Price : $0.01-0.1

According to age and gender, we provide mens diaper pants and adult diapers for ladies. According to the size, we have XS adult diapers, adult diaper pants XL, mens diaper pants XXL, adult diapers for women xxl, super thick adult diapers, extra large overnight diapers, etc. According...

Thursday, August 11, 2022

Pigment Violet has 128 kinds of classification of organic pigments. Used in high-grade industrial coatings, and inorganic pigments such as iron oxide red and transparent can be used in metal decorative paint; It can also be used for coloring plastics such as PVC and pur, art pigment ink...

Thursday, August 11, 2022

Product name C.I.Pigment Red 269 C.I.12466 CAS: 67990-05-0 C32H25ClN4O5 12466; C.I.Pigment Red 269; P.R.269; Naphthol Red RA 1087; 2-Naphthalenecarboxamide, N-(5-chloro-2-methoxyphenyl)-3-hydroxy-4 -[[2-meyhoxy-5 [(phenylamino)carbonyl]phenyl]azo]-; Pigment Red 269 Physical and Chemical...

Thursday, August 11, 2022

Product name C.I.Pigment Red 268 C.I.12316 CAS: 16403-84-2 C25H20N4O3 12316; C.I.Pigment Red 268; P.R.268; Naphthol Red RA 1012; Permanent Scarlet OA; 4-[[5-(aminocarbonyl)-2-methylphenyl]azo ]-3-hydroxy-N-phenyl-2-Naphthalenecarbox amide Pigment Red 268 Physical and Chemical Properties...

Tuesday, August 09, 2022

Quantity : 15~20PCS/Y - Price : 200-10000000dollars

GKSL series pneumatic and hydraulic actuators provide global customers the latest valve actuation design. It is linear type. Pneumatic cylinders (supply medium can be air or gas) are suitable for supply pressures up to 160 bar.Hydraulic cylinders are suitable for supply pressures up to 400 bar...

Tuesday, August 09, 2022

Quantity : 500ton - Price : $4.5/kg

- Product Description - Specification Condensation Cured Silicone Rubber for Mold Making, which is also named condensed cure silicone rubber and Tin cure silicone rubber, is generally industrial liquid silicone rubber vulcanized under room temperature(RTV-2). Applications Condensation...

Tuesday, August 09, 2022

Quantity : 500ton - Price : $6.5/kg

- Product Description - Specification Addition Cured Silicone Rubber for Mold Making, which is also named addition cure silicone rubber and platinum cure silicone rubber, is generally a two-component liquid silicone rubber vulcanized under room temperature(RTV-2). Applications Addition...

Tuesday, August 09, 2022

Sand casting china is the most commonly applied method for casting the metal part. It suits most of the raw materials, ferroalloy, and non-ferroalloy both can be used to do the sand casting. Types of sand casting is able to produce the part varying from several gram weight to dozens of tons...

Tuesday, August 09, 2022

Resin sand casting is a kind of floor molding process, by mixing the resin with quartz sand and solidification agent, to create the very hard and solid mold. The resulted resin sand casting product will have smooth surfaces, accurate dimensions, and less sand residual and casting...

Tuesday, August 09, 2022

Investment casting, also called the lost-wax casting process, is actually an ancient metal casting technology with a history of over 6,000 years. Investment casting mold generally refers to the mold made with meltable materials (such as wax, plastic, etc.) in very accurate dimensions...

Tuesday, August 09, 2022

Sand casting means the main material consisting of the mold is sand, and the melted metal fills the casting cavity only by its gravity. Generally, this method of making the casting products is so-called sand casting. There are several different kinds of sand applying to industrial...

Saturday, August 06, 2022

Our company develop this wood plastic extrusion line which is fully mixed with raw materials such as PVC, PP, PE and other plastics and plant fibres such as Wood flour, rice husk, straw, and then subjected to plastic processing techniques such as extrusion, moulding, and injection...

Saturday, August 06, 2022

1.SJ Single screw extruder is fetured in high production capacity and high-velocity extrusion, and low-temperature plasticization design guarantees production warranty. 2. Two stages style unitary design of single screw extruder which reinforces plasticization capacity guarantees...