MELTED - 234 ads

Saturday, February 18, 2023

JKZ's induction heating melting furnace can firm the current directly on the graphite crucible or directly on the metal, thereby greatly reducing the heat loss on the furnace itself. With the characteristics of 100% success startup, 100% duty cycle, and power point reach up to 0...

Tuesday, February 14, 2023

pp meltblown fabric is made up of 1 to 5 micron (μm) fine fiber and providing excellent filtration performance as a core media in many filtration system. Mingguan utilizes state-of-the-art production lines and patented production technologies with benchmark testing facilities to ensure...

Saturday, February 11, 2023

The HDPE net is a food grade plastic raw material (HDPE) which is heated and melted in an extruder, extruded through a screw, and enters an extra-rotary head with a small hole in the surface of the mold. The molten plastic flows through the pores of the die to form two molten filaments...

Sunday, January 29, 2023

Micro crystal wax is a refined synthetic wax with similar microcrystalline properties. As an experienced micro crystalline wax manufacturer, we provide micro crystal wax with the characteristics of good gloss, high melting point, and light color. The structure of micro crystal wax...

Sunday, January 29, 2023

The Fischer Tropsch wax, also called FT wax, with a high melting point (generally higher than 85°) is mainly composed of linear, saturated high-carbon alkanes with a relative molecular mass of 500-1000, which gives this chemical a fine crystal structure, high melting point, and narrow...

Sunday, January 29, 2023

JWELL Machinery is designed and developed in a new idea, pipe and profile extrusion line produces PP pipe series, PVC pipeline series, ABS pipeline series, composite pipe series, etc., plastic pipe extrusion machine is high-yield, low energy consumption, good melt homogeneity, and...

Monday, January 16, 2023

Graphite block, as the name suggests, refers to block graphite. It is a kind of artificial graphite, which is made of coke products by artificial heating and other processes. Because of its structure, carbon graphite block has the following properties: high-temperature resistance...

Saturday, December 31, 2022

Decades of accumulation of mould manufacturing technology have witnessed the popularity of electrical plastic molding products. The in mould electronics has been widely applied to various industries. As a result, electronics injection mold manufacturers have been talking about rapid...

Wednesday, December 28, 2022

PP melt blown non woven fabric pp meltblown fabric is made up of 1 to 5 micron (μm) fine fiber and providing excellent filtration performance as a core media in many filtration system. Mingguan utilizes state-of-the-art production lines and patented production technologies with benchmark...

Wednesday, December 28, 2022

PP Spunbond fabric are mainly used for outer and inner materials of surgical and medical face masks. The Overview of PP Spun Bond Non-Woven Fabric Non woven fabric pp spunbond is one of types of spunbond polypropylene fabric , which are mainly used for outer and inner materials of...

Wednesday, December 28, 2022

ffp1 fabric.ffp2 fabric.ffp3 fabric Melt blown non woven fabrics are mainly used for manufacturing industrial dust-proof face masks, cup shape face masks, and other protective face masks. The Overview of FFP1,FFP2,FFP3 Melt-blown Material FFP1.FFP2.fabric ffp3.Melt-blown non-woven...

Saturday, December 10, 2022

Vacuum investment casting is one of the precision investment casting methods. This special technic is mainly applying to producing the small but high requirements casting items such as aircraft parts, jewelry, and accessories. The term, vacuum investment casting, refers to the process...

Friday, December 09, 2022

ISO Class 8 Clean Room  Quality Control  Low & High Volume Manufacturing  Competitive Price  Reliability and Stability With more than 20 years experience of injection molding industry and equipped with ISO Class 8 Clean Room, as the injection moulding suppliers , we offer...

Friday, December 09, 2022

Plastic Injection Molds for Sale ISO Class 8 Clean Room  Quality Control  Low & High Volume Manufacturing  Competitive Price  Reliability and Stability Packson is the OEM injection mold maker in china . We can supply custom injection molding parts. Our high quality and precision...

Friday, November 18, 2022

The melamine finish is similar to the plastic laminate on countertops, but the melamine polish is not as thick as the plastic laminate. The advantages of polish interior melamine polish door are its durable finish and its relatively low cost. HOLIKE MELAMINE POLISH INTERIOR DOOR IMAGES...

Saturday, November 12, 2022

Isostatic pressing graphite is a new product developed in the world in recent 50 years, which is closely related to today's high technology. Isostatic press graphite has the properties of high-temperature resistance, corrosion resistance, high strength, good conductivity, and thermal...

Wednesday, November 02, 2022

AlNiCo magnets (also called Aluminum-Nickel-Cobalt magnets) are consist of Al (aluminum), Ni (nickel), Co (cobalt), and other elements like Cu (Cooper) and Ti (Titanium), they are part of the permanent magnet family, they are the most versatile magnets available and can be made into...

Thursday, October 20, 2022

Quantity : USD3000-20 - Price : 30-40sets/per month

Water Injection Moulding At this time, if the injection molding machine is allowed to inject the plastic to a certain position to stop the injection, and replace the melt into the mold with a certain pressure of the gas, the gas will also flow to the middle layer with the least flow resistance...

Thursday, October 20, 2022

Quantity : USD3000-20 - Price : 30-40sets/per month

Pre Deformation Mold When the plastic material rushes into the mold cavity, it loses heat due to heat conduction, and the melted plastic will freeze and solidify, therefore, for complex or large products, high mold temperature is usually used for filling, the purpose is to reduce...

Tuesday, October 11, 2022

Price : $700-1100/MT

Pink fused alumina is based on alumina powder as the main raw material, adding some quantity of chromium oxide, then melted at high temperature. It is pink in color, the hardness is similar to that of white fused alumina, and its toughness is higher than that of white fused alumina...

Thursday, September 22, 2022

SiSiB® PC19419 is a mixture of high viscosity cyclopentasiloxane and dimethiconol, which is colorless, odorless and non-toxic. In addition, this product has a high affinity with the skin and hair and can form a soft protective film. SiSiB® PC19419 can be added into the formulations...

Thursday, September 22, 2022

SiSiB® PC19417 is a solution of an ultra-high viscosity dimethiconol fluid in a blend of cyclotetrasiloxane and cyclopentasiloxane, with colorlessness, odorlessness and non-toxicity which has a high affinity with the skin and hair and can form a soft protective film. This soft silicone...

Wednesday, September 21, 2022

Price : 5000-50000USD

What is Plastic Welding and What is Plastic Welding Used for? Pipe welding machines & cutting machines are necessary for metal pipe procedure. The pipe cutting machine can cut plastic pipe fittings into different angles according to the needs of customers. The cutting angle is...

Friday, September 16, 2022

Adhesive PTFE acrylic tape, heat resistant with quick release surface The Details of Adhesive PTFE Acrylic Tape PTFE tape acrylic adhesive is a kind of heat resistant tape, the tape is impregnated with high level PTFE PTFE coating which offers nonstick surface and superior releasing function...

Tuesday, September 06, 2022

The products are processed by injection molding extruder, with a smooth surface and high dimensional accuracy. Products of different sizes, colors, and types can be customized according to customer requirements. As a professional injection and extrusion molding company, ETCN provides...

Tuesday, August 09, 2022

Sand casting china is the most commonly applied method for casting the metal part. It suits most of the raw materials, ferroalloy, and non-ferroalloy both can be used to do the sand casting. Types of sand casting is able to produce the part varying from several gram weight to dozens of tons...

Tuesday, August 09, 2022

The low pressure die casting is to let the melted metal flow into the casting mold under a certain degree of pressure, and solidify the casting part with the pressure as well. The pressure is powered by the inert gas or compressed air inside the sealed crucible, pressure push the...

Tuesday, August 09, 2022

Investment casting, also called the lost-wax casting process, is actually an ancient metal casting technology with a history of over 6,000 years. Investment casting mold generally refers to the mold made with meltable materials (such as wax, plastic, etc.) in very accurate dimensions...

Tuesday, August 09, 2022

Sand casting means the main material consisting of the mold is sand, and the melted metal fills the casting cavity only by its gravity. Generally, this method of making the casting products is so-called sand casting. There are several different kinds of sand applying to industrial...

Tuesday, August 09, 2022

Die Casting involves 3 key elements: the die casting machine, the mold, and the alloy materials, and the die casting could be described as the process of combining pressure, speed, and time to achieve an ideal cast metal part. The pressure applied during the casting process is a different...