HYPERION - 110 ads

Friday, May 29, 2020

Quantity : 1pcs - Price : 40-200usd

The f theta scan lens are commonly used in laser scanning systems that employ two-axis galvanometers to scan a specified area but cannot tolerate the angle at the image plane. By introducing a specified amount of barrel distortion in a scanning lens, the F-Theta scanning lens becomes...

Friday, May 29, 2020

Quantity : 1pcs - Price : 40-200usd

Hyperion Optics offers economical custom design collimating lenses that can effectively correct spherical and chromatic aberrations, including singlet and chromatic lenses. Many of our clients had experiences where off-the-shelf collimators they purchased for their system do not collimate...

Friday, May 29, 2020

Quantity : 1pcs - Price : 40-200usd

Laser beam expansion or reduction is a common application requirement in most labs using lasers or light sources and optics. Users always find there are so many off-the-shelf laser beam expanders, however, hard to find one exactly fit their needs in terms of spectral range or expansion ratio...

Friday, May 29, 2020

Quantity : 1pcs - Price : 40-200usd

Hyperion Optics specializes in custom anamorphic lenses design and production. We are experienced in creating custom solutions for unique applications such as projection and anamorphic photography. Generally speaking, these lenses are special systems that effectively change the aspect...

Friday, May 29, 2020

Quantity : 1pcs - Price : 40-200usd

Low Dispersion Available Uncoated or AR Coated Ideal for Thermal Imaging, FLIR, and Medical Systems Hyperion Optics Zinc Selenide Windows (ZnS Window) are perfect for a wide variety of infrared applications including thermal imaging, FLIR, and medical systems. This chemical vapor...

Friday, May 29, 2020

Quantity : 1pcs - Price : 40-200usd

Hyperion Optics supplies a wide range of custom Quartz, UV fused silica and IR fused quartz windows through UV to infrared spectrum. Custom quartz windows: have a useful transmission range from 0.26 visible to 2um in the infrared, which working temperature up to 1050°C, with typical...

Friday, May 29, 2020

Quantity : 1pcs - Price : 40-200usd

This product is polished spherical lenses made by optical glass fused silica, sapphire or other optical materials which have relatively high transmission rate for a diode with an anti-reflection coating. Widely used for coupling light in and out of fibers. It has the advantage of...

Friday, May 29, 2020

Quantity : 1pcs - Price : 40-200usd

Right angle prism turn light through 90° by internal reflection from the hypotenuse, or 180° from two right angle surfaces. When the light incident angle is perpendicular to the right angle surfaces, the light will be reflected at the surface of glass/air interface. When the input...

Saturday, August 04, 2018

MODEL Hyperion– 4000LM Parameters PV Module 90W Life time 25 years (The power attenuation of each year is around 1%) LED luminous 4000LM LED chip 3535 LED viewing Angel 70°*140° Color Temperature 3000K-6500K，Typical（5500K-6000K） Color rendering index ＞70 Life time ＞5years Battery...

Saturday, November 11, 2017

Hyperion Optics's complete range of cost effective dichroic filter range offers superior transmission, reflection and absorption characteristics. Dichroic filters consist of thin film dielectric coatings on glass and exhibit sharp transitions between transmitted and reflected wavelengths...

Saturday, November 11, 2017

Band pass filter can separate a band of monochromatic light, the ideal transmittance of band-pass filter through the bandwidth is 100%, while the actual band-pass filter pass band is not the ideal square. The actual band-pass filter generally has a center wavelength λ0, a transmittance T0...

Saturday, November 04, 2017

With the rapid development of military weaponry and correlative targeting and monitoring systems, ZnS is widely utilized in multi-spectral IR applications. Its relatively high transmittance through 3-5µm and 8-10µm enable ZnS being an ideal choice for multi-spectral applications. Further...

Saturday, November 04, 2017

Zinc Selenide has great transmittance through the band 0.5-22μm, especially at 10.6μm, and is commonly used in thermal imaging and FLIR systems, also its outstanding low absorption coefficient and high resistance to thermal shock makes it an ideal choice for high power CO2 laser applications...

Saturday, November 04, 2017

Hyperion Optics utilize optical grade silicon which is specified with a resistivity of 10-40 Ohm-cm higher than most semiconductor applications. For CZ grade silicon (Czochralski method) has a absorption band at 9μm, this is acceptable if the application is used range of 3 to 5μm thermal band...

Saturday, November 04, 2017

Sapphire is the best medium for spherical lenses that require a broad spectrum of light transmission and high optical clarity, especially in demanding applications such as laser system or working under harsh environmental conditions. With its excellent hardness, high thermal conductivity...

Saturday, November 04, 2017

In the range of 2-12 μm, germanium is the most commonly used material for the production of spherical lenses and windows for high efficiency infrared in the imaging system. Germanium has a high refractive index (about 4.0 through 2-14μm band), usually do not need to be modified due...

Saturday, November 04, 2017

GaAs is semi insulator, which can be used in large power continuous CO2 laser system to replace the zinc sulfide in lens or mirror forms. GaAs is suitable in applications consists of toughness and durability. In some cases, particles of dust or steel will impact the optical element surface...

Saturday, November 04, 2017

CVD magnesium fluoride (MgF2-CVD) has good mechanical properties, chemical stability, impact resistance, great anti thermal fluctuations and radiation. While it has excellent transmission from 0.11 to 9 um, suitable for optical lenses, wedge, and window manufacturing. MgF2 is also...

Saturday, November 04, 2017

Hyperion Optics supplies uncoated 1/2 inch and 1 inch in diameter Calcium Fluoride (CaF2) lenses. Please talk to our technicians for your custom requirement. We are also able to provide coated products with AR coating through 1.65µm or 2-5µm. CaF2 has high transmission rate through 0...

Saturday, November 04, 2017

NHG introduced seven Chalcogenide materials category for designers and manufacturers namely IRG201, IRG202, IRG203, IRG204, IRG205, IRG206, IRG207, with actual tested refractive index and transmittance through the wave range of 0.8µm up to 20µm data available. Download HUBEI NEW HUAGUANG...