ROLLED - 1808 ads

Sunday, June 09, 2019

Cut To Length line China is a high efficient metal processing production line for cutting metal flat sheet from metal coils. The metal coils unwind, leveled, cut to length and blanking. RISHBIN supply full range of cut to length line China according to client's special requirement...

Sunday, May 26, 2019

- ASTM A516 / ASME SA516 - - ASTM A516/A516M Specification for Pressure Vessel Plates, Carbon Steel, for Moderate and Lower Temperature Service. - ASTM A516/A516M specification covers carbon steel plates intended primarily for service in welded pressure vessels where improved notch...

Sunday, May 26, 2019

- < strong>ASTM A515 GR 70/ ASME SA515 - - ASTM A515/A515M Standard Specification For Pressure Vessel Plates, Carbon Steel, For Intermediate-And Higher-Temperature Service - ASTM A515/A515M specification covers carbon-silicon steel plates primarily for intermediate- and higher...

Sunday, April 21, 2019

Canola oil press machine is mainly composed of electrical control, automatic heating, adjustment, transmission, and vacuum oil filter. The screw is carburized by alloy steel to enhance surface hardness and wear resistance. The platters are ground by the surface grinding machine. It...

Thursday, April 04, 2019

The china label die cutting machine OF slitting machine manufacturers in china is all kinds of trademarks processed into the final product must be the machine. The steps of the die-cutting process are as follows: unwinding - die cutting - scraping - winding or crosscutting. Unwinding...

Saturday, March 30, 2019

It's capable with hot-rolled Ⅰ, Ⅱ, Ⅲ, Ⅳ grade ribbed steel with high-quality shearing, transportation, storage and processing, and the whole process is controlled by the computer, high production and accuracy with labor saving. The equipment mainly used for steel processing and distribution...

Saturday, March 30, 2019

Automatic Wire Bending Machine Stirrup Bender WG12D-4 Stirrup Bender WG12D-4(stirrup rebar) has the particular patented straightening system, constituted by sets of horizontal and vertical rollers that can be automatically adjusted. Automatic Wire Bending Machine Stirrup Bender WG12D-5X...

Wednesday, March 27, 2019

Based on much experiences on providing quality, cost-effective and long lasting roll forming systems - Metal steel sheet slitting machine main types: - 1. Simple metal slitter2. Liquid pressure semi-automatic working metal slitter3. Fully automatic metal slitterMetal steel sheet...

Saturday, December 29, 2018

Quantity : 5 Micro To - Price : 2300USD

SIGMA Aluminum is a large-scale aluminum fabrication enterprise, established in 2008, is professional in R&D and production of aluminum products. SIGMA ALUMINUM follows international aluminum sheets/coils/foils manufacturing standards and quality control; we have full range of...

Friday, December 14, 2018

- High Gloss Aluminum Composite Panel - White aluminium composite panel or aluminum-plastic panel is a kind of composite new material which has been through surface treatment and a series of technological processing. It's composed of aluminum panels with coating as the surface and...

Monday, December 03, 2018

RISHBIN Light Gauge Slitters for pre-painted/coated coils, max. thickness of up to 3mm, max. width of up to 2200mm, and speed of up to 300 m/min. It consists of Decoiler with coil car, guiding & pinch device, high precision slitters, dual head/quick tooling change for slitter is available...

Monday, December 03, 2018

RISHBIN Medium Gauge Slitters is used to slit the big rolls into narrow rolls, and packaging it automatically. It works of max. thickness up to 10mm, max. width of up to 2200mm, and speed of up to 100 m/min. It consists of Decoiler with coil car, guiding & pinch device, medium gauge slitters...

Monday, December 03, 2018

- Heavy Gauge Slitting Lines - RISHBIN Heavy Gauge Slitters are designed to slit high strength heavy gauge materials. Coils max. thickness of up to 20mm, max. width of up to 2500mm, and speed of up to 60 m/min. It consists of Decoiler with coil car, guiding & pinch device, heavy...

Monday, December 03, 2018

Cut To Length line is a high efficient metal processing production line for cutting metal flat sheet from metal coils. The metal coils unwind, leveled, cut to length and blanking. RISHBIN supply full range of cut to length line according to client's special requirement by combining...

Monday, December 03, 2018

Cut To Length line is a high efficient metal processing production line for cutting metal flat sheet from metal coils. The metal coils unwind, leveled, cut to length and blanking. RISHBIN supply full range of cut to length line machine according to client's special requirement by...

Wednesday, November 28, 2018

Drill Collar 1. Size: as customer's request 2. Standard: API 9. Certification: ISO9001, API Product Type: A. Slick Drill Collar: mainly used to provide bit weight to drill bit so that drill pipe is in tension B. Spiral Drill Collar: used to reduce contact area with hole so as to avoid...

Wednesday, October 17, 2018

Quantity : 10 - Price : negotiated

high voltage 200kva transformer 1, Core type The cores are constructed with prime corematerial of interleaved grade non-aging, low loss, high permeability, grain oriented and cold rolled silicon steel laminations. 2, Wingdings The design, construction and treatment of winding give...

Sunday, September 16, 2018

Quantity : 9999999 - Price : Negotiable

Brief Introduction Cold rolled ribbed steel is widely used building materials of the building industry, and after cold rolling of the hot-rolled rods,uniformly distributed in the longitudinal direction of the surface along three sides, or both sides of the cross rib reinforced...

Wednesday, September 05, 2018

Quantity : 1 - Price : 125000USD

SP(1-8) automatic strip cutting machine suppliers is applicable to coils of various specifications. It is used for cutting the coil into required width for the use of punch line through the procedure of uncoiling, pre-leveling, cropping, slitting and recoiling. It has advantages such...

Wednesday, September 05, 2018

Quantity : 1 - Price : 125000USD

SP(1-6) sheet metal slitter machine for sales is applicable to coils of various specifications. It is used for slitting the coil into required width for the use of punch line through the procedure of uncoiling, pre-leveling, cropping, slitting and recoiling. It has advantages such...

Wednesday, September 05, 2018

Quantity : 1 - Price : 105000USD

- - SP(0.2-2.0) Series nonferrous metal / Steel slitting line is applicable to coils of various specifications. It is used for slitting the coil into required width for the use of punch line through the procedure of uncoiling, pre-leveling, cropping, slitting and recoiling. It has...

Wednesday, September 05, 2018

Quantity : 1 - Price : 105000USD

SP(0.3-3.0) slitting machine is applicable to coils of various specifications. It is used for slitting the coil into required width for the use of punch line through the procedure of uncoiling, pre-leveling, cropping, slitting and recoiling. It has advantages such as proper layout...

Wednesday, September 05, 2018

Quantity : 1 - Price : 105000USD

- SP(0.4-4.0) steel coil slitting machine - - Coil thickness: 0.4-4.0mm - Coil width:400-2000mm - Productin speed: 20-100m/min - Pipe material: HR, CR, PPGI, GI,AL,CU,etc - Product descriion: SP(0.4-4.0) steel coil slitting machine is applicable to coils of various specifications...

Tuesday, August 28, 2018

Quantity : at least 4 - Price : USD 10-470

GX-N 100G military defense vibration isolator is total different from the GH series. With oval rubber pad in, the big impact shock of this model can be up to 100G. The nominal load of GX-N is from 10N (1.02kg) to 60N (6.12kg). With the oval type rubber pad in, combined tightly with...

Tuesday, August 28, 2018

Quantity : 25MT

Color coated steel is a kind of pre-painted steel product ,which are produced by coating a layer of paint on the surface of cold rolled, galvanized or galvalume coils. After surface treatment on their surfaces, the steel is coated with a certain thickness of the adhesive coating...

Tuesday, August 28, 2018

Quantity : 25MT

Color coated steel is a kind of pre-painted steel product ,which are produced by coating a layer of paint on the surface of cold rolled, galvanized or galvalume coils. After surface treatment on their surfaces, the steel is coated with a certain thickness of the adhesive coating...

Tuesday, August 28, 2018

Quantity : 25MT

Color coated steel is a kind of pre-painted steel product ,which are produced by coating a layer of paint on the surface of cold rolled, galvanized or galvalume coils. After surface treatment on their surfaces, the steel is coated with a certain thickness of the adhesive coating...

Tuesday, August 28, 2018

Quantity : 25MT

Color coated steel is a kind of pre-painted steel product ,which are produced by coating a layer of paint on the surface of cold rolled, galvanized or galvalume coils. After surface treatment on their surfaces, the steel is coated with a certain thickness of the adhesive coating...

Tuesday, August 28, 2018

Quantity : 25MT

Color coated steel is a kind of pre-painted steel product ,which are produced by coating a layer of paint on the surface of cold rolled, galvanized or galvalume coils. After surface treatment on their surfaces, the steel is coated with a certain thickness of the adhesive coating...

Tuesday, August 28, 2018

Quantity : 25MT

Color coated steel is a kind of pre-painted steel product ,which are produced by coating a layer of paint on the surface of cold rolled, galvanized or galvalume coils. After surface treatment on their surfaces, the steel is coated with a certain thickness of the adhesive coating...