ANTIRUST - 111 ads

Friday, July 15, 2022

Quantity : 12000 tons - Price : $2.5/kg-6.8/kg

Can I Paint Asphalt Coal tar pitch is obtained by fractional distillation of coal tar. It has better water resistance and chemical resistance. It can be made into shielding paints without using pigments. By adding aluminum powder, its anti-rust performance can be enhanced. The main...

Friday, July 15, 2022

Quantity : 12000 tons - Price : $2.5/kg-6.8/kg

Asphalt aluminum ship bottom antirust paint is made of asphalt, aluminum powder, extender pigment, solvent. It has good water resistance, rust and rust resistance, and has good adhesion to the surface of the steel. It is used as anti-rust paint for ship bottom, and in good match...

Friday, July 15, 2022

Quantity : 12000 tons - Price : $2.5/kg-6.8/kg

What Is Alkyd Paint Used for? Alkyd resin paint is mainly composed of alkyd resin. It is currently the most used type of paint. It has the advantages of low price, simple application, low requirements for the applying environment, full and hard coating film, good durability and weather...

Wednesday, May 11, 2022

China 3003 aluminum sheet is a typical Al-Mn antirust alloy. The addition of the alloy component Mn increases the strength slightly while maintaining the excellent workability and corrosion resistance of pure aluminum. The 3003 aluminum sheet is a non-heat-treated alloy and cannot...

Wednesday, May 11, 2022

Aluminum coil 3003 is a commonly used Al-Mn antirust alloy. Similarly, the 3003 aluminum coil is also a non-heat-treated alloy, and its mechanical properties can be improved by conventional cold processing. In addition, because 3003 aluminum coil has good corrosion resistance, plus...

Thursday, April 07, 2022

How to Prevent Rust Treatment of Aluminum Profile Cold Forming Machine The gear oil used in the machine tool of the aluminum profile china cold roll forming machine must be introduced into the automobile fuel tank after severe stress. The automobile fuel tank of the cold forming machine...

Sunday, February 20, 2022

Quantity : 5000-10000 - Price : USD 1.00 to USD 500.

Brass lighting has tremendous appeal in home interiors. Embrace the unique look of brass lighting by designing brass fixtures in a traditional home for an antique interior look or a modern home for a sleek industrial atmosphere. In our collection of brass lighting fixtures, you'll...

Thursday, December 16, 2021

Sorbitan esters and Polysorbates as nonionic offer many advantages over ionic surfactants including increase stability, enhance flexibility and provide wider compatibility. They are stable in mild acids, alkalis and electrolytes and do not react with ionic ingredients or actives....

Tuesday, November 23, 2021

Quantity : 100000 - Price : 800-1200$

Galvalume steel sheet is an important alloy material often used in daily life. Galvalume steel plate is composed of Al Zn alloy structure, which consists of 55% Al, 43% Zn, and 2% Si solidified at 600 ℃. The whole structure is composed of Al Fe Si Zn, forming a dense quaternary crystal...

Saturday, September 25, 2021

Thick build epoxy zinc epoxy primer is an epoxy zinc-rich primer with thick coating properties. The thickness of 70μm～80μm can be reached by airless spraying at one time. The ordinary epoxy zinc-rich primer does not have the performance of the thick coating, and one spray is about 40μm...

Saturday, September 25, 2021

Modified epoxy non-ferrous metal primer is formulated with a surface-tolerant agent, which will react with the rust on the substrates and form a passive film that has excellent protection to the iron and steel surfaces, with excellent physical and mechanical performances. It is used...

Saturday, September 25, 2021

High-build Epoxy Coal Tar Primer is formulated with special epoxy resin, coal tar pitch paint, antirust pigment, solvents and additives. It has fast drying time, good anti-rust property, high mechanical strength, acid and alkali corrosion resistance, and is mainly used as primer...

Saturday, August 14, 2021

Galvalume steel sheet is an important alloy material often used in daily life. Galvalume steel plate is composed of Al Zn alloy structure, which consists of 55% Al, 43% Zn, and 2% Si solidified at 600 ℃. The whole structure is composed of Al Fe Si Zn, forming a dense quaternary crystal...

Friday, August 13, 2021

The 5754 aluminum plate is a non-heat treated Al-Mg alloy and is also an antirust aluminum sheet. 5754 aluminum properties show excellent corrosion resistance, good welding, and good machining formability. Most notably, anodizing and other surface treatments of 5754 aluminum alloy...

Saturday, July 31, 2021

Tung oil is a type of wood finishing product that is derived from the pressed nut of the tung tree. Tung oil is drying oil that is similar to linseed, safflower, poppy, and soybean oil. Drying oils are perfect for wooden objects, since the oil dries to a clear film once it has made...

Tuesday, July 20, 2021

The RH-AUDIO Public Address Projector Speakers are made out of all metal extruded aluminum alloy enclosure with cast aluminium top and bottom plates are fully antirust, dustproof and weatherproof IP65 rated and the speaker driver units inside also are waterproof featured. Built-in...

Saturday, October 17, 2020

sound column speakers The RH-AUDIO Column Speakers are slimline loudspeakers which use several vertically mounted speaker drivers to produce clear sound reproduction over a long distance with little vertical spread of sound. The indoor column speakers employ 4" full range speakers (models...)

Tuesday, September 22, 2020

Quantity : 30 sets - Price : USD10,000-USD100,000

How to Prevent Rust Treatment of Aluminum Profile Cold Forming Machine The gear oil used in the machine tool of the aluminum profile cold forming machine must be introduced into the automobile fuel tank after severe stress. The automobile fuel tank of the cold forming machine must...

Friday, August 10, 2018

Quantity : 15000 Squa - Price : ¥25 ~ 120 / Square M

- What Is The Thickness Requirement Of Sign board Aluminum Composite Panel - The upper and lower aluminum plastic composite panel shall have a thickness of antirust aluminum not less than 0.20mm, and the total thickness shall be not less than 4mm. Fluorocarbon coating or polyester...

Monday, December 18, 2017

Types: all-round shafts with hole or not, with key or not, and so on. Materials: plain carbon steel, free-cutting steel, aluminium alloy and other custom materials. Precision: Grade 6-8(Generally), Specially follow the drawing. Detail: Remove burrs, antirust oil, carton packing. Custom or not...

Wednesday, November 08, 2017

Quantity : 4500 tons - Price : 2 500,00 €

3003 aluminum coil is commonly product in the 3000 series of Al-Mn alloy. Because of the addition of manganese in the alloy, it has excellent rust resistance. Therefore, the 3003 aluminum coil is the most widely called antirust aluminum. As one of the representative products of Mingtai Aluminum...

Thursday, July 06, 2017

Price : 3,07 €

Product formation： Two component paint, group A is by senior acrylic resin, pigments, additives and solvent, and isocyanate as group B. Product features: . film is tough and fullness, high gloss, good decorative performance . Excellent weather resistance, light color retention ....

Saturday, May 06, 2017

HDPE Strength film HDPE Strength Films is made with high-strength film, a cross-laminated polyolefin film,which provides the anti-tearing, anti-burst and puncture-resistant properties. Our High Strength films, it can be adapted to the harsh environment and can be assured that the...

Saturday, May 06, 2017

HDPE STrength film HDPE Strength Films is made with high-strength film, a cross-laminated polyolefin film,which provides the anti-tearing, anti-burst and puncture-resistant properties. Our High Strength films, it can be adapted to the harsh environment and can be assured that the...

Saturday, May 06, 2017

Printing Strength Film HDPE Strength Films is made with high-strength film, a cross-laminated polyolefin film,which provides the anti-tearing, anti-burst and puncture-resistant properties. Our High Strength films, it can be adapted to the harsh environment and can be assured that...

Saturday, May 06, 2017

Printing Strength Film HDPE Strength Films is made with high-strength film, a cross-laminated polyolefin film,which provides the anti-tearing, anti-burst and puncture-resistant properties. Our High Strength films, it can be adapted to the harsh environment and can be assured that...

Saturday, May 06, 2017

Printing Strength Film HDPE Strength Films is made with high-strength film, a cross-laminated polyolefin film,which provides the anti-tearing, anti-burst and puncture-resistant properties. Our High Strength films, it can be adapted to the harsh environment and can be assured that...

Wednesday, March 29, 2017

Quantity : 9999 - Price : 1,89 €

Features: Finish: brass plated→nickel plated→antirust oil Have stronge anti-rusty force Longer using life High-level material adopped Type: 35-40mm cup Opening angle: 95 degrees Depth of hinge cup: 11.3MM Diameter of hinge cup: 40MM Face panel (K)measurement: 3-7MM SGS...

Tuesday, November 15, 2016

Quantity : 1SET - Price : USD4000

applicable industries: RT-302 Desktop constant temperature and humidity test chamber applied to test the products quality, such as electronic, plastic products, electrical appliances, instruments, food, vehicles, metals, chemicals, building materials, aerospace, medical care .....

Tuesday, August 30, 2016

Price : 10,00 €

product attribute: specification：customer's drawingmaterial: carbon steel apply：machinery partsbrand：XinyuanCountry of Origin: China(Mainland)Casting process: precision castingstandard: ISO9001: 2008surface treatment: antirust oilweight: 0.2-0.5kgsservice: OEM ODM Website: http://www...