SEPARATION - 1314 ads

Monday, August 12, 2019

Solid phase extraction principle Solid phase extraction is a separation technique that combines selective retention, selective elution, and the like. When a complex sample solution passes through the sorbent, the sorbent selectively retains the aimed compound and a small number of...

Friday, August 09, 2019

What is the bottle-top dispenser? During a scientific experiment, a bottle-top dispenser can indicate its excellent precision and high-repetition of separating operation without wasting solvents. While handling with some corrosive liquids or solvents, it provides safety assurance...

Friday, August 09, 2019

Filter Paper is a tool commonly found in chemical laboratories for separation of two-phase, and usually round in shape. To filter two phases so as to separate and purify matter, most of the filter paper is made of cotton fiber and is made in different ways for different purposes....

Friday, August 09, 2019

Reversed-phase chromatography (RPC) contains any chromatographic method using a non-polar stationary phase. The word “reverse” has a historical background. In the 1970s, most liquid chromatography was performed on unmodified silica or alumina. Their surface chemistry is hydrophilic...

Thursday, August 08, 2019

Flash columns adopt high-capacity silica gel for precise filling, which has very excellent separation and purification performance. The specific surface area of high-capacity spherical silica gel is 40% higher than that of ordinary spherical silica gel, and the sample loading is twice...

Thursday, August 08, 2019

The membrane filter is widely used in today's life, including ultrafiltration membrane, microporous membrane, nanofiltration membrane, microfiltration membrane, mesopore fiber ultrafiltration membrane, etc. Role of the membrane filter 1. Treatment of solute separation and concentration...

Thursday, August 08, 2019

Chromatography is a separation and analysis method and the separation is the core. Therefore, HPLC columns are the heart of the chromatographic system. The requirements for the column are high efficiency, good selectivity and fast analysis speed. Generally, the column length of about...

Thursday, August 08, 2019

Most common SPE cartridges are injection syringes made of polyethylene, in which there are two plugs made of polypropylene or fiberglass, with a certain amount of chromatographic adsorbent (filler) between the two plugs. SPE cartridges without sieve plate 1. Avoid “non-specific adsorption” 2...

Tuesday, August 06, 2019

In recent years, the application of HPLC in inorganic analysis has developed rapidly, and the use of flash columns has been more and more widely because of a method that can rapidly determine heavy metal elements in environmental water samples. Matters needing the attention of flash columns 1...

Tuesday, August 06, 2019

HPLC is more suitable for the separation and analysis of substances with the high boiling point, poor thermal stability, physiological activity, and relatively large molecular weight. Hawach HPLC columns are widely used in the analysis of nucleic acid, peptide, lactones, polycyclic...

Monday, August 05, 2019

Bottle-top dispenser, also known as a bottle-top distributor and bottle-top pipette, is an instrument for accurately measuring liquid chemicals. Hawach Bottle-top separator is suitable for general acid and alkali, low concentration strong acid and alkali and salts. The specific steps...

Saturday, August 03, 2019

In the application of membrane separation technology, the microporous membrane is the most widely used membrane variety. It is simple and fast to use and is widely used in many fields such as scientific research, food testing, chemical industry, nanotechnology, energy, and environmental...

Friday, August 02, 2019

Usually, the sample contains something that is not of interest to the analyst. Salt, lipids, lipid-containing substances, humic acid, hydrophobic proteins, and other biological substances are some substances that may interact with the HPLC column in use. These substances have less...

Thursday, August 01, 2019

The ceramic microfiltration membrane element ( MF membrane) is made from alumina and zirconia which is an asymmetric membrane structure with multi-channel tubular shape. The pore is on the channel. Driven by operation pressure, the liquid is running in the membrane. The part less...

Thursday, August 01, 2019

Ceramic membranes (Porous Ceramic Membrane & tubular ceramic membrane) are available for microfiltration, ultrafiltration and nanofiltration as single-channel or multiple-channel elements with channel diameters between 2 and 16mm. Their main characteristics of porous tubular ceramic...

Thursday, August 01, 2019

Skid-mounted device (Ceramic Membrane Filtration System) effectively allocates and stores machine for process and modular systems in the field of solid-liquid separation. A CMF skid-mounted device is designed by order and fully optimized as process flow, which includes CMF unit, power part...

Wednesday, July 31, 2019

- The Selection Principle of Silica Gel Column - Commonly, the maximum sample loading volume of a silica gel column is about 1/20 of the volume of the column's silica gel. However, as a practical matter, specific sample loading volume should be decided by each constituent's degree...

Wednesday, July 31, 2019

Membrane Filter Water Treatment Membrane filter water treatment is a solid-liquid separation technology. It filters water through membrane holes and retains impurities in water without chemical changes. However, due to the very small size of the membrane holes, there are some corresponding...

Wednesday, July 31, 2019

Solid phase extraction (SPE), developed in the 1970s, can replace the traditional liquid-liquid extraction in many fields and has been applied more and more widely in the laboratory. The common solvent of SPE Hexane, isooctane, tetrahalide carbon, trihalomethane, dihalomethane, tetrahydrofuran...

Tuesday, July 30, 2019

This article will focus on the methods of using the bottle-top dispensers. 1. Put the intake pipe into the dispenser and then tighten the nut. 2. Put the drain pipe into the dispenser and then tighten it. 3. Take off the cap of the drain pipe and put it under the drain pipe 4. Adjust...

Friday, July 19, 2019

Bonded-phase chromatography is a liquid-liquid chromatography method in which a stationary phase is covalently bound to a carrier particle, which overcomes the mechanical shock in the distribution chromatography, the constant loss of the stationary phase and the gradual change of...

Tuesday, July 16, 2019

Quantity : 100 rolls - Price : 90,00 €

CAT 7 SFTP CABLE DESCRIPTION: Cat7SFTP cable provides superior performance to ensure reliability in delivering 10G network speed at at a bandwidth up to 600 MHz. Its design of each twisted pair is shielded individually with aluminium foil to add physical separation between the four...

Monday, July 15, 2019

Laboratory data show that the optimum flow rate of silica gel flash columns is decided by the length and width of columns and the property of gel. To be more specific, longer and narrower columns will provide more theoretical plates which are able to affect the flow rate. When referring...

Monday, July 15, 2019

The solid phase extraction cartridges (SPE column, or Solid Phase Extraction Cartridges, or SPE cartridges for short) is a sample pretreatment device for extraction, separation and concentration developed from a chromatography column. Mainly used in sample pretreatment of various foods...

Friday, July 12, 2019

Hawach vacuum filtration device is a kind of equipment which uses vacuum negative pressure as a driving force to realize solid-liquid separation. In structure, the filter section extends along the horizontal length direction and can complete filtering, washing, drying, and regeneration...

Friday, July 12, 2019

Bottle-top dispensers use advanced inert materials (silicate glass, ETFE, PFA, FEP, PTFE and platinum-iridium, and PP) to ensure the purity of the reagent from first to last dispensers. In addition, it can also be used for all kinds of range of liquid separation and can also be used...

Friday, July 12, 2019

Note on the filter paper box that when using the quantitative and qualitative analysis filter paper to filter the precipitate: 1. Generally uses natural filtration, using the filter paper body and the ability to retain solid particles to separate the liquid and solid; 2. Because the...

Friday, July 12, 2019

Today, Hawach want to talk about the pre-treatment process for pesticide residue detection from the perspective of food safety – QuEChERS, and also tell you how to pre-treat pesticide residue food. Introduction The present analytical methods and determining techniques, pre-treatment...

Thursday, July 11, 2019

The formation of a flash phenomenon The boiling point of water is higher than 100℃ when the water is heated under a certain pressure. The higher the pressure, the higher the boiling point of water and the higher the heat content. When the pressure decreases, some sensible heat is released...

Thursday, July 11, 2019

The formation of a flash phenomenon The boiling point of water is higher than 100℃ when the water is heated under a certain pressure. The higher the pressure, the higher the boiling point of water and the higher the heat content. When the pressure decreases, some sensible heat is released...