TUBES&PIPES - 8999 ads

Friday, December 07, 2012

Quantity : 15-20 sets - Price : USD 1500-2000 per se

We Need a Dryer Moisture content of biomass material is a key factor affecting the final quality of pellet. Experience tells us that if moisture content of raw material exceeds 16%, pellet quality will begin to suffer. So drying is a significant operation in pellet producing. There...

Friday, December 07, 2012

Quantity : 15-20 sets - Price : USD 1500-2000 per se

Pipe Dryer Introduction Pipe dryer, also known as flash dryer, is used for drying materials whose moisture contents is higher than 16%.The wet biomass material like sawdust is dispersed into a stream of heated air(or gas )which conveys it through a drying duct. The wet material...

Friday, December 07, 2012

Quantity : 100000

flex sections What is it? * The components of the flexible tube are STS 304 Bellows, or other s/s Inner .Outer Braids and Caps. * This is connected to the exhaust pipe which is also connected to engine so that it can decrease the noise and vibration generated by engine. * Prevent...

Friday, December 07, 2012

Quantity : 100000

Flex pipe What is it? * The components of the flexible tube are STS 304 Bellows, or other s/s Inner .Outer Braids and Caps. * This is connected to the exhaust pipe which is also connected to engine so that it can decrease the noise and vibration generated by engine. * Prevent the...

Friday, December 07, 2012

Quantity : 100000

Flexible Pipes What is it? * The components of the flexible tube are STS 304 Bellows, or other s/s Inner .Outer Braids and Caps. * This is connected to the exhaust pipe which is also connected to engine so that it can decrease the noise and vibration generated by engine. * Prevent...

Friday, December 07, 2012

Quantity : 100000

exhaust flexible pipe What is it? * The components of the flexible tube are STS 304 Bellows, or other s/s Inner .Outer Braids and Caps. * This is connected to the exhaust pipe which is also connected to engine so that it can decrease the noise and vibration generated by engine...

Thursday, December 06, 2012

Quantity : one FCL - Price : 0,31 €

Nous fabriquons des ferrures de meubles et d'accessoires et d'exportation à travers le monde depuis plusieurs années, avec la force de Tubes, Chaînes en aluminium, charnières, glissières à billes, ressort à gaz, les jambes canapé, égouttoir, etc Charnières: angle d'ouverture: 100 °...

Thursday, December 06, 2012

Quantity : one FCL - Price : 0,56 €

We manufacture furniture hardware fittings and accessories and export to over the world for several years, with the strength of Tubes, Aluminum Channels , Hinges, Ball bearing Slides, Gas spring, sofa legs, Dish rack etc. Tubes : 1) Refined craftwork , 2) Standard export package ,...

Monday, December 03, 2012

Quantity : 1 - Price : negotiate

This is the professional lifting equipment for saloon car's maintenance and examining. It has the main characteristic of occupying small area, good security. It is also very simple to handle&working credibly. Especially for the full hydraulic pressure working system, it is suitable...

Monday, December 03, 2012

Quantity : 1 - Price : negotiate

Features: STRONG 1,5mm "internatonal standard" column steel plates made in Shanghai 2,8mm brace arm and 6mm internal sliding column, never deform 3,Wearable, Anti-High temperature, high strength oiliness macromolecule nylon slide block 4,Require no less than 150mm cement on the ground...

Sunday, December 02, 2012

Quantity : 1 - Price : 95 000,00 €

Sell truck sound drill Ingersoll Rand T4W year 1978 with 215 m of steel tubes 2 hammers sd6 and sd8 + taillants 3 and all the necessary equipment. Truck and Probe / compressor completely put back(completely handed) for nine, pumps and hydraulic system as well as pumps in foam(moss) included...

Saturday, December 01, 2012

Quantity : 1 set - Price : US $ 19,000-38,000/

Detailed Product Description Downspout roll forming machine Downpipe roll forming machine With CE approval 1 year warranty Rainspout Cold Roll Forming Machine Line TUT Machinery: Downpipe Forming Machine, Rainspout Formin inwater Downpipe Roll Forming Machine Features Specifications: 1)...

Friday, November 30, 2012

Quantity : 15-20 sets - Price : USD 1500-2000 per se

Ring Die Feed Pellet MillIntroduction Ring die pellet mill is an ideal pelletizing machine for high quality feed pellets.Before pelletizing, grains such as corn, wheat, rice and soybean, etc. need to be crushed into powder, Also they should be mixed thoroughly with a mixer since...

Thursday, November 29, 2012

Quantity : 20000tons - Price : 700usd/ton

Supply erw steel pipe 1. Outer diameter: 6-610mm 2. Wall thickness: 1.65-22mm, 3. Standard: API 5L, BS1387-85, JIS-G344, GB/T3091-2001 4. Material: Q195, Q235, Q345, S355J2H, ST37, ST52 5. Length: 0.5mtr-20mtr 6. End: square ends (straight cut, saw cut, and torch cut). or beveled...

Thursday, November 29, 2012

Quantity : 20000ton - Price : 700usd/ton

Supply seamless steel pipe 1. Outer Diameter: Hot finish: 400 – 1020mm, Cold drawn: 3.72 – 457mm 2. Wall Thickness: Hot finish: 16 – 200mm, Cold drawn: 1.7 – 22.5mm 3. Standard: ASTM A106, ASTM A53, ASTM A179, API5L GR.B, X42, X46, X52, 4. Length: Random Length, Fixed Length, SRL, DRL 5...

Thursday, November 29, 2012

Quantity : 20000tons - Price : 700usd/ton

Supply ssaw steel pipe 1. Outer diameter: 219mm-4064mm 2. Wall thickness: 3.2-40mm 3. Standard: GB/T3091-2001, BS1387-1985, DIN2458, API 5L, EN10217 4. Material: Q195, Q235, Q345, S355J2H, ST37, ST52 5. Length: 6mtr-18mtr 6. End: square ends (straight cut, saw cut, and torch cut)...

Thursday, November 29, 2012

Quantity : 20000tons - Price : 700usd/ton

Supply lsaw steel pipe 1. Outer diameter: 219mm-1820mm 2. Wall thickness: 5-50mm 3. Standard: GB/T3091-2001, BS1387-1985, DIN2458, API 5L, EN10217 4. Material: Q195, Q235, Q345, S355J2H, ST37, ST52 5. Length: 6mtr-18mtr 6. End: square ends (straight cut, saw cut, and torch cut)...

Thursday, November 29, 2012

Quantity : 20000tons - Price : 700usd/ton

Supply Carbon Steel Pipe Outer diameter: 1/4" to 30" Wall Thickness: SCH 5, SCH 10, SCH 20, SCH 40, SCH 80, SCH 160, SCH XXS4 Standards: ASTM A 106, ASTM A 53, ASTM A179, API 5L Gr.B, X42, X46, X52, API 5CT K55 Packing: as per customers' requests Application: high-temperature service...

Thursday, November 29, 2012

Quantity : 1000tons - Price : 2-5USD

EVA plastic color masterbatch High concentration of pigments for bright colors.good dispersing performance. Widely for dyeing slipper,sandal,mid-sole,EVA pelleting,EVA sheet,plastic foaming(EVA,PE,PVC) We are specializing in manufacturing all kinds of pastic color masterbatches...

Monday, November 19, 2012

Quantity : 100 - Price : 2usd

expansion tank OEM quality water pump thermostat housing thermostat thermostat cap thermostat sensor thermostat switch auto fan radiator auto water pipes water tank cooling system brake hose brake cylinder brake master cylinder brake wheel cylinder clutch master cylinder clutch...

Sunday, November 18, 2012

Quantity : 10 - Price : US$610

Specification Camera 1. camera size：23mmx120mm front size: 45mm 2．Camera case material：stainless steel house stainless steel 304 3. Camera glass material：sapphir glass 4. sensor size：1/4 inch 5．Total Pixels：PAL：720X576 NTSC: 720X480 6. view angle：120°。 7. camera light：12PCS white LEDS。 8...

Sunday, November 18, 2012

Quantity : 1000ton - Price : 800usd/ton

ASTM A106 Hot Rolled Seamless Carbon Steel Pipe 1.Size: 10-1016mm*1-32mm 2.Grade : A,B,C 3.Operative Standard: ASTM A106 4.Type of End-Finish: PE,BE 5.Packing : bundle packing ,paint varnish coating, beveled and plastic caps 6.Usage: liquid service pipe, structure pipe 7.Length...

Sunday, November 18, 2012

Quantity : 1000ton - Price : 800usd/ton

API 5L Line Pipe with 3LPP Coating API 5L Line Pipe: 1.Size: 10-1016mm*1-120mm 2.Grade: A,B,X42,X46,X52,X60,X65,X70 3.Standard: API Spec 5L 4.End-Finish: PE,BE, Threaded connection 5.Application: conveying gas, water and oil in both the oil and natural gas industries. 6.Packing...

Sunday, November 18, 2012

Quantity : 1000ton - Price : 800usd/ton

API 5L line pipe with 3PE Coating API 5L Line Pipe: 1.Size: 10-1016mm*1-120mm 2.Grade: A,B,X42,X46,X52,X60,X65,X70 3.Standard: API Spec 5L 4.End-Finish: PE,BE, Threaded connection 5.Application: conveying gas, water and oil in both the oil and natural gas industries. 6.Packing...

Wednesday, November 14, 2012

Quantity : 100000

s? What is it? * The components of the flexible tube are STS 304 Bellows, or other s/s Inner .Outer Braids and Caps. * This is connected to the exhaust pipe which is also connected to engine so that it can decrease the noise and vibration generated by engine. * Prevent the thermal...

Sunday, November 11, 2012

Quantity : 1 - Price : 375,00 €

1.The vacuum tube absorbs the solar energy and transfers into the heat energy, then pass it to the Heat Pipe, it can get high temperature. 2. It is steady and credible. 3. There is no water in the vacuum tube,so the tube will not break in the winter. 4. It can be combined with...

Sunday, November 11, 2012

Quantity : 1000ton - Price : 800usd/ton

Slotted Pipe 1.Size: 4-1/2” 、5”、5-1/2”、6-5/8”、7”、7-5/8”、7-3/4”、8-5/8 ”、9-5/8” 2.Grade: J55、K55、N80-1、N80Q、L80-1、L80-9Cr、 L80-13Cr、C90、C95、T95、P110、Q125 3.Operative Standard: API Spec 5CT 、API Spec 5B and Agreement Location : No.9 Xiangfu Road, 410004 Hunan, Contact : Alinda Tong...

Friday, November 09, 2012

Quantity : 1 - Price : 80 000,00 €

1.This device is the only automatic Paint Roller Winding Machine which really adapt servocontrol in our country.It is stable,high efficiency,easy operation and adjustment,etc. 2.This machine is equipped with heating(suitable for PP pipe,flame supervision,temperature adjustment) technology...

Friday, November 09, 2012

Quantity : 10000 - Price : 620 usd per ton

Guangzhou Juyi Steel Pipe Co., Ltd. Is an API & ISO9001 ERW steel pipe manufacturer ( API license NO.: 5L-0657 & 5CT-0964): Juyi owns a ERW610 (24”) production line, pipe & casing product line and an external 3PE coating product line, annually producing 300,000 ton ERW...

Wednesday, November 07, 2012

Quantity : 1-500KG - Price : 50-60USD/KG

Carbide Drawing Die Properties of grade Grade Density (g/cm3) Hardness (HRA) TRS (MPa) Average Grain size (ųm) YL01 15.25 93.5 3300 0.8 YL10.2 14.5 92.0 4000 0.8 YG6 14.95 90 2400 1.6 YG6X 14.95 91.5 1900 1.0 YG8 14.75 89.5 2800 1...