OUTPUT - 11390 ads

Monday, June 03, 2024

This 5 heads vape cartridge filling machine is specially developed for filling semi-finished vapes. It has the advantages of precise positioning, high-speed operation, easy and fast operation, accurate oil output without waste, time and effort saving, cost saving, low cost and durability...

Saturday, June 01, 2024

Price : 100USD

Features of audio signal splitter GX-ANT201-X Ultra-high dynamic low noise components and ultra-wideband microstrip line design, with ultra-low internal distortion and loss, eliminating the mixing interference when multi-channel receiving system is used at the same time The antenna...

Saturday, June 01, 2024

Price : 100USD

Features of Power Supply Sequencer GX-PB1405 Standard 2U chassis, aluminum panel, convenient and beautiful With 8-bit LED indicator, it is easy to know the channel status 8 groups of 16 channels power outputs, with each output AC220V Equipped with electronic lock switch, with manual...

Saturday, June 01, 2024

Price : 100USD

The new compact design, small and light, beautiful and generous, the front panel has a power switch, a separate channel gain control knob, and has the function of stereo and parallel selection. It has short circuit, overheating, overload, over current, output DC, soft start protection...

Saturday, June 01, 2024

Flat Stainless Steel Tactile Bar Directional Stainless steel tactile indicator (XC-MDT5064) Smooth surface,Hollow strips with pin Place of Origin: Zhejiang,China (Mainland) Brand Name: XC Advantage: Factory Directly Sale Function: Anti-slip and provide protection for the blind and...

Saturday, June 01, 2024

Quantity : 80-100 MW/ - Price : $0.215/W - $0.268/W

The Zeus series has enhanced module density and significantly increased module power and efficiency, with an output power of 585-670w. It also has the core advantages of high power, high efficiency, high power generation, cost saving, good system adaptability, high reliability and...

Saturday, June 01, 2024

Quantity : 80-100 MW/ - Price : $0.215/W - $0.268/W

The solar cell can directly convert light energy into electrical energy through photoelectric effect or photo-chemical effect. As long as it is exposed to light, voltage and current can be output instant. With leading solar cell technologies, the highest efficiency is 24% Doped...

Saturday, June 01, 2024

Quantity : 80-100 MW/ - Price : $0.215/W - $0.268/W

What is a grid connected pv system The generated electricity will be fed into the grid, and the grid is used as an energy storage device. When the electricity load is large and the solar power is insufficient, electricity is purchased from the national grid. When the load is small...

Saturday, June 01, 2024

Price : $2-$150

Air Compressor Cut Off Switch Pressure Range: 15~60psi / 40~250psi / 400~500 psi Stable and accurate pressure switching Rare metal parts, durable quality Optimal for heavy duty commercial air compressors Robust structure for industrial harsh conditions There are numerous types of...

Saturday, June 01, 2024

Price : $2-$150

A pressure Transmitter (pressure transducer) converts the physical quantity 'force per area' into an industry-standard signal that machines can read. Pressure transmitter manufacturer LEFOO offers water pressure sensor and pressure transducers at precise exactness of 0.1%FS,0.25%FS,0...

Saturday, June 01, 2024

Price : $2-$150

A pressure switch control is a control device that runs a switch on or switch-off action when a preset pressure value occurs. LEFOO pressure control switches and high pressure switches are mainly used as the flow controller for fluid or gas in applications such as HVAC systems, water pumps...

Saturday, June 01, 2024

Tinko high temperature humidity transmitter are suitable for HAVC temperature and humidity measurement, like workshop, warehouse, museum, cold room, laboratory and other environments. They can also be used for humidify and dehumidify equipment. Moreover, they can collocate with Tinko...

Saturday, June 01, 2024

Tinko temperature controller industrial can improve process efficiency, product quality and minimize waste. They can be used in heating equipment, cooling equipment and other industrial machinery. Our 120 volt temperature controller can control temperature, humidity, pressure, flow...

Saturday, June 01, 2024

Tinko HRTC-G1 hot runner control module is using a wide viewing angle LCD screen. It can display more information at the same time than the LED screen, such as soft start status, alarm information, etc. It supports RS485 communication, alarm output function and remote standby function...

Saturday, June 01, 2024

Tinko HRTC-F2 hot runner control module is a special module. It is one module with two zones design, which can save much space of the controller layout in the factory and save manufacturing cost. Users can operate two zones separately, independent display units and indicators. It...

Saturday, June 01, 2024

Tinko HRTC-C1 temp controller module is an economic led display module. It is also using industrial-grade CPU, with accurate temperature control, stability and reliability. The design and structure of HRTC-C1 hot runner control module is simple, but function is similar as our other models...

Saturday, June 01, 2024

Price : 100USD

Based on the pioneering technology of intelligent high-speed parallel delta robot, Robotphoenix invented new 4-DOF parallel semiconductor wafer handling robots of single-platform and dual-platform, which broke through the bottleneck to realize a larger swing angle and higher output...

Friday, May 31, 2024

Quantity : 1000 sets/ - Price : USD 500~50000

MFS 120 A induction heating power supply adopts IGBT as the core component. As a medium frequency induction heating machine, MFS-120A has an output frequency ranging from 1KHZ to10KHz, and the single machine power is up to 600kw (3Phases~380v). It is suitable for billets hot forging heating...

Friday, May 31, 2024

Quantity : 1000 sets/ - Price : USD 500~50000

If you need hot forging for large workpieces, smelting for ferrous or non-ferrous metals or deep heat treatment, the MFS series of intermediate frequency induction heating equipment is your most correct choice. Advantages of medium frequency induction heating equipment The induction...

Friday, May 31, 2024

Quantity : 1000 sets/ - Price : USD 500~50000

CX2030C 50-120KHZ high-frequency MOSFET type induction heater holds the output power of 15KW/30KVA. It is suitable for soldering, welding and quenching heating of small metal parts. Produced by a famous brand, MOSFET of our high frequency induction heater is quality reliable. With...

Friday, May 31, 2024

Quantity : 1000 sets/ - Price : USD 500~50000

CX2020A high-frequency induction forging machine is designed to work at the frequency range of 50~120KHz and its output power range is 10KW. It is often used for induction brazing, welding, small parts forging heating and heat treatment. The core component of this high power induction...

Friday, May 31, 2024

Electrical Bare Copper Wire for Electrical Purpose Copper's excellent electrical and thermal conductivity provides the most essential, free-moving electrons which electrical wiring requires. Annealed copper cable must have low resistivity to electrical currents to ensure a power...

Friday, May 31, 2024

Anti-dezincation Brass Rod The anti-dezincification copper rods produced by our company can be applied to wading devices such as plumbing hardware, water meters, various valves, pipe faucets, water supply pipe fittings and so on. It is suitable for a series of products with ecological...

Friday, May 31, 2024

Anti-Corona Soldering Magnet Wire The anti-corona enameled copper wire for frequency conversion motor produced by our company can improve the partial discharge performance and extend the service life of the motor. This product can be widely applied to all kinds of frequency conversion...

Friday, May 31, 2024

Annealed Copper Cable (2.6mm) The annealed bare copper wire produced by our company are widely used in industries such as transposed conductors, ultra-high voltage cables, various types of wires and cables, various types of enameled wires, network wires, electronic wires and communication...

Friday, May 31, 2024

Air Conditioning Straight Tube Air conditioning copper pipe is one of the high-performance copper pipe products produced by our company, which can be used in the connection of heat exchangers and piping systems in the air conditioning and refrigeration industries. Air conditioning...

Friday, May 31, 2024

ACR Copper Fittings ACR copper fittings can be manufactured according to customers' requirements. Generally we produce them with GB/T11618-2008, EN1254/BS864, ANSI/ASME B 16.22, JISH3401 standard. Air conditioning copper pipe fittings applying to the connection of air conditioning...

Friday, May 31, 2024

Quantity : 5-10sets p - Price : $1500-100000

A fiber laser printer is a kind of industrial printing device that imprints fine patterns on a variety of materials, including glass, metal, and plastic, using a laser beam. The method is commonly utilized in industry for batch coding, product identification, and labeling. The printing...

Friday, May 31, 2024

Quantity : 5-10sets p - Price : $1500-100000

Double Shaft Shredder A double shaft plastic shredder is a type of shredder machine that is equipped with two parallel shafts, each fitted with rotary blades. The blades rotate in opposite directions to shred materials such as plastics, rubber, wood, and metal into small, manageable pieces...

Friday, May 31, 2024

Quantity : 5-10sets p - Price : $1500-100000

Plastic processing equipment, plastic processing machine refers to a range of machinery used to manufacture plastic products from raw polymers. It includes various machines such as extruders, injection molding machines, thermoformers, and blow molding machines. These machines are...