PARTS PROCESSING - 29897 ads

Thursday, July 06, 2023

Quantity : 20000 roll - Price : 0.01~1 USD

Medical surgical dressing consists of a layer of glue-coated non-woven fabric and releases paper. The dressing medical's soft and elastic non-woven fabric can make the wound feel comfortable, so medical surgical dressing is suitable for joints and other parts of the body. Specifications...

Thursday, July 06, 2023

Price : USD0.1-15

3 to 1 shrink tubing using high-quality polymers, scientific formula, mechanical co-mixing polymer alloy, product molding after the electronic accelerator irradiation crosslinking, continuous expansion. heat Shrink tubing 3 to 1 products with environmental protection, soft, flame retardant...

Thursday, July 06, 2023

Soxi is one of the top plastic material dryer manufacturers , our plastic dryer machine will avoid the following questions. In the plastic machinery equipment, the plastic in the resin state easily absorbs moisture from the air. In another word, the moisture absorbed during storage...

Thursday, July 06, 2023

The hot air dryer for plastic can be directly installed on the injection molding machine. Hot air enters evenly from bottom to top to ensure a good drying effect. The middle part of the barrel is an openable structure for easy cleaning. The air volume can be adjusted according to...

Thursday, July 06, 2023

The main machine and the hopper adopt a separate design, which can be matched with more than 2 hoppers for one-to-many conveying, which improves the raw material conveying capacity, and the raw material conveying capacity reaches 700 kg per hour. The maximum lift is up to 10 meters...

Thursday, July 06, 2023

The wattage range of FL12A led high mast flood light 40W-180W FL12A 100 led flood light is equipped with a thickened tilt bracket, avoid lighting block itself while ensuring the structural stability. The light source uses IP68 LED module with high luminous efficiency and easy replacement...

Thursday, July 06, 2023

Quantity : 20000 - Price : 1-100USD

The main features of OTDR tester for sale are: Convenient one-button testing. High-speed signal processing, less test time, and fast analysis. Color TFT LCD. USB port connects to PC. Input optical signal auto-detection and self-protection. Built-in VFL. There are many fiber optic...

Thursday, July 06, 2023

Quantity : 65000 - Price : 500—15000(USD)

Common Fθ lens is a series of general lens used in laser fields. The common F-theta lens has developed into the 3th generation product after experiencing continuous improvement of Optical Component Center. The materials of the 3th generation product all belong to world-class domestic...

Thursday, July 06, 2023

Quantity : 65000 - Price : 500—15000(USD)

High power galvo laser welding system is independently developed by Han's Scanner. The system after fully validated, with carefully designed double wind cooling water circulation system and excellent whole sealing, strict selection and testing of optical element, the assembly process...

Thursday, July 06, 2023

Quantity : 65000 - Price : 500—15000(USD)

The single-axis galvo motor system contains a high-precision sensor and a motor part based on moving magnet technology. The motor rotor is optimized for excellent dynamic properties and response characteristics. In addition, the motor features high rigidity and low friction. Moreover...

Thursday, July 06, 2023

Quantity : 65000 - Price : 500—15000(USD)

What is f theta lens Han's Scanner telecentric f theta lens series products are the most commonly used parts in the laser field. After our continuous improving and updating, we have improved its quality, following the development direction of international industrial laser cutting...

Thursday, July 06, 2023

Tricot Warp Knitting Machine for Sale After years of R & D and practice, Changzhou runfengyuan Textile Machinery Manufacturing Co., Ltd. has successfully manufactured various models of high-speed Tricot and Raschel warp knitting machines. The products have a wide range of changes...

Thursday, July 06, 2023

The china grids warp knitting machine has one set of warp lining systems and one set of full-width weft insertion system, which can be lined with warp and weft in parallel at the same time, bound together by binding coils, glued online, dried and solidified, cooled cloth storage,...

Thursday, July 06, 2023

Industrial Needle Punched PET Spunbond Non-Woven Fabric Industrial PET spunbond non-woven fabric has excellent physical and mechanical properties in a wide temperature range. The long-term use temperature can reach 120°C. The electrical insulation of the polyester spunbond nonwoven...

Thursday, July 06, 2023

The sterile disposable hypodermic syringes or disposable hypodermic needles are assembled by the barrel, plunger, piston, with/without hypodermic needle, which can be classified into central nozzle type and side type according to the prick connector. Sterile Hypodermic Syringe Introduction...

Thursday, July 06, 2023

Overview of Compact Spray Gun ZEGO provides a high-quality compact spray gun: excellent finish with the highest transfer efficiency, ergonomic comfort, energy savings, and environmental responsibility. Professional advice and good service. RFQ today! Advantages of compact spray guns...

Wednesday, July 05, 2023

Quantity : 1000kg - Price : 400-800

PEEK Seal Material in Mechanical PEEK is a kind of mateiral with both rigidity and toughness, excellent mechanical properties, wear resistance, self-lubrication, high temperature resistance, creep resistance and dynamic fatigue resistance, can be widely used for wear-resistant lubricating parts...

Wednesday, July 05, 2023

Quantity : 1000kg - Price : 400-800

Peek medical grade has good biocompatibility, non-toxicity, low density, and excellent mechanical properties. Its elastic modulus is very close to human bones. The peek medical material can be circularly disinfected by ethyl , steam thermal, ultraviolet rays, and γrays, and can be...

Wednesday, July 05, 2023

Quantity : 1000kg - Price : 400-800

Peek Bearing Material Due to its excellent mechanical strength, dynamic fatigue resistance, high-temperature resistance, creep resistance, self-lubrication and thermal expansion coefficient comparable to metals, peek bearing material is replacing more metals and other engineering...

Wednesday, July 05, 2023

Quantity : 1000kg - Price : 400-800

Peek Material Applications Natural peek material has excellent comprehensive properties and can replace traditional materials such as metals and ceramics in many special fields. PEEK compound has applications in mechanical engineering, aerospace, automotive industry, medical, electrical...

Wednesday, July 05, 2023

As GreensTone CEO said, GreensTone has over 10 years of experience in the China turn key pcb assembly industry. Our core values are centered around customer service, engineering, manufacturing, and product solutions. In the beginning, we gained a stellar reputation through China...

Wednesday, July 05, 2023

SMT PCB Assembly As SMT assembly supplier, GreensTone SMT production runs with automated SMT production processes, including single or double-sided component insertions. STM components include passive Component: components as small as 01005, 0201,0402. ICs like BGA: handle BGA of 0...

Wednesday, July 05, 2023

Sheet metal is used to make objects of various thicknesses, from very thin sheet metal to sheet metal with a thickness greater than 6mm. Sheet metal fabrication is a subtractive process that forms metal sheets to the desired shape by using a variety of manufacturing methods. Sheet...

Wednesday, July 05, 2023

The benefits of GreensTone's turn-key china pcb prototype service can be utilized for clients who require a convenient, quick turnaround for the prototyping of printed circuit board designs. GreensTone, a China prototype pcb assembly supplier , is a global specialist in cost-effective...

Wednesday, July 05, 2023

Which Mold do you want to do? Plastic Injection/die casting or punch mold, etc. Which Mould Material do you want choice? 45#, 50#, P20, H13, 718, 2738, NAK80, S136, SKD61, etc. Which does the Product Material want? PP, PC, PS, PE, PU, PVC, ABS, PMMA, etc. How many Cavities? Single/Multiple...

Wednesday, July 05, 2023

Quantity : 500pcs - Price : ¥600-2000

E seal for container is a container-sealing product using the world's unique serial number electronic chip to record the container-sealing number, container-sealing manufacturer number and other information, has anti-counterfeiting functions and one-time use characteristics. Electronic...

Wednesday, July 05, 2023

Quantity : 130-140 To - Price : USD 1.5-6.0 / kgs

The high-brightness base film is a three-layer co-extruded biaxially stretched polyester film with excellent optical properties such as high gloss and high transmittance. Features: high transparency, high gloss, suitable shrinkage and excellent processing performance Conventional thickness...

Wednesday, July 05, 2023

Quantity : 130-140 To - Price : USD 1.5-6.0 / kgs

As the base film of flame retardant film, the flame retardant film can exert its flame retardant performance after downstream coating, compounding and other processing procedures, and is widely used in the electromechanical industry as an insulating material.The flame retardant film...

Wednesday, July 05, 2023

Quantity : 1200sets/y - Price : USD10000-200000

CNC EDM Machine Applied in Industries Mold & Die Automotive Aerospace and Defense Medical Electronics Home Appliances BIEM is a edm parts supplier, we provide edm cnc machine, spark edm machine, cnc wire cut edm machine, edm spare parts, edm consumable parts and etc. Want...

Wednesday, July 05, 2023

Quantity : 1200sets/y - Price : USD10000-200000

BIEM is one of the key edm machine manufacturer, we provide cnc electronic discharge machine machine, edm machine parts, spark edm machine, cnc edm die sinker and etc. Want to know more? Please contact us. Location : B3, Dimon Building, Garden Road, 100191 Beijing, Contact : ncedm dm...