CONTROLLED - 3468 ads

Wednesday, November 15, 2023

Price : USD10-200.00

The truck uses compressed air to disengage and recombine the amt clutch actuator to complete the start and shift gears. A concentric pneumatic clutch actuator contains all elements connected to the gearbox system to disengage and reengage the clutch as required by the gearbox. The...

Tuesday, November 14, 2023

Signal surge protective device (SPD) is actually a signal lightning arrester, which is installed in series in the signal transmission line, usually at the front end of the equipment, to protect the subsequent equipment-all kinds of signal lines and equipment, and prevent lightning...

Tuesday, November 14, 2023

Digital input, relay output isolated barrier, transfers digital signals (dry contact or NAMUR proximity switch) from hazardous area to safe area. Each channel can be provided to select phase reversal and to enable line fault detection. And digital output isolated barrier, with 12V/45mA...

Tuesday, November 14, 2023

Price : $10000-400000

The Paper honeycomb core machine includes 2 models. There are 7 parts: Heavy load hydraulic paper stand, Paper core gluing machine, Paper core conveying pressing machine, dryer, High-speed cutting machine, Paper core conveying machine, and Electrical control cabinet. This paper honeycomb...

Tuesday, November 14, 2023

Price : $10000-400000

This category honeycomb cutter includes all kinds of machines that cut honeycomb products into different shapes, including honeycomb paper core expander, honeycomb paper slitting machine, honeycomb board die cutting machine, etc. Honeycomb paper core expander can expand honeycomb core...

Tuesday, November 14, 2023

DFIC has rich experiences in manufacturing small insulated storage container, which also includes modular container home taking in use of insulated container technique. Insulated cargo containers are used for transporting cargo such as pharmaceuticals, chemicals, and foods, protect...

Tuesday, November 14, 2023

Price : 100USD

Boer laparoscopic bipolar forceps are intended for general, laparoscopic and gynecological procedures. The device must and only be used with bipolar cogulation current, the electrosurgical generator will be controlled by a footswitch. Boer maryland bipolar forceps use additional insulation...

Saturday, November 11, 2023

Features of Internet Radio Speakers GX-SP8024C-K / GX-SP8024D-K / GX-SP8024E-K / GX-SP8024F-K The cabinet is made of thick fireproof ABS material, and the pure aluminum surface net is hardened and anti-oxidation treatment, which is durable and beautiful Based on TCP/IP, UDP, IGMP protocol...

Saturday, November 11, 2023

Power Meters are designed to monitor energy usage. In industrial settings, power meters are used to measure the power usage of machinery, lighting, appliances, and even entire buildings. This data can be used to reduce energy usage and save on electricity bills. Power meter supplier...

Friday, November 10, 2023

Price : USD0.3-USD5

BR tuya smart bulb, RED, BLUE, GREEN, WHITE adjustable, bulged reflector light bulb. As a professional TUYA china led lighting bulb manufacturer, we provide high quality TUYA bulged reflector bulb. The user can increase the atmosphere of the application scene by controlling the tuya...

Friday, November 10, 2023

Price : USD0.3-USD5

The a19 led smart bulb is a versatile lighting solution that allows users to adjust the color temperature according to the specific preference. With a color temperature range of 2200-6000K, the users can choose warm white for a cozy ambiance or cool white for a more vibrant and energetic...

Friday, November 10, 2023

Stamping Computer Enclosures Surface treatment: We are capable of providing various treatments, including powder coating, anodizing, silk printing, color plating, laser logo, and more. Process: Sheet Metal Stamping Material: For Mild Steel: Powder coating, Painting, Hot dip galvanizing...

Friday, November 10, 2023

DRIP IRRIGATION DRIPPER In the drip irrigation system, the device that changes the pressure water flow in the capillary into a drip or fine flow through the flow channel or orifice is called irrigation drippers or irrigation emitters. Most drippers are made of plastic. The commonly...

Thursday, November 09, 2023

Quantity : 1200sets/y - Price : USD10000-200000

CNC wire cut EDM machine KD400GL has Kingred's own designed mechanical structure and lasted developed PLC-controlled system running at the latest Windows platform. Heavy-duty “C” structure and “T” shape machine bed with good rigidity to make sure accuracy of cutting, long-term accuracy...

Thursday, November 09, 2023

Quantity : 1200sets/y - Price : USD10000-200000

KD series high precision wire edm is featured with “C” structure, “T” shape machine bed, 4 axis/6 axis AC servo motor control, and 5 axis PLC control system on latest Windows platform. With technology of multiple cuts to get good performance of surface finish and precision. High Precision...

Thursday, November 09, 2023

Quantity : 1200sets/y - Price : USD10000-200000

DK77 series high speed wire cut EDM has non-resistors HF power with Max cutting speed higher than 300mm2/min, Max cutting thickness is higher than 1000 mm. High accuracy linear guide way, ball screw and strong machine body with good rigidity to make sure good performance of cutting accuracy...

Thursday, November 09, 2023

Quantity : 1 - Price : 1,00 €

Application The measurement of the open and lock forces of bottle caps holds significant importance as both online and offline technical parameters in production. These forces can have a direct impact on the ease of product transportation and consumer usage. Due to its exceptional...

Thursday, November 09, 2023

Quantity : 1 - Price : 1,00 €

Application Evaluating the integrity through pressure decay (internal pressurization) leak testing is essential to confirm the sample's ability to deliver the necessary product protection. Seal integrity tests are conducted to evaluate options for sustainable packaging, cost-effective...

Thursday, November 09, 2023

Quantity : 1 - Price : 1,00 €

HTT-02 Hot Tack Tester Application Hot tack is a crucial property of a heat-sealed layer, as it determines the layer's ability to withstand forces attempting to separate the seal while it is still in a hot state. This characteristic holds significant importance, especially in processes...

Thursday, November 09, 2023

Quantity : 1 - Price : 1,00 €

Application Hot tack is a critical property of heat-sealed layers, preventing the seal from breaking while still hot, especially in vertical form-fill-seal (VFFS) processes. The HTT-01 Hot Tack and Tensile Tester assesses heat seal strength right after sealing and before cooling. Additionally...

Thursday, November 09, 2023

Quantity : 1 - Price : 1,00 €

Application A heat sealer is a machine that employs heat to seal products, packaging, and thermoplastic materials. Heat sealing involves uniting thermoplastics through heat and pressure. Items like plastic bags and packaging are commonly shaped and sealed with heat sealers. A Heat Seal Tester...

Thursday, November 09, 2023

Quantity : 1 - Price : 1,00 €

Application HAST-01 Hot Air Thermal Shrinkage Tester conforms to ASTM D5591 and ASTM D4974 and is used for the measurement of the thermal shrinkage force and rate of yarns and cords in air at controlled temperature. It is applicable to yarns and cords made of nylon, polyester and other polymers...

Thursday, November 09, 2023

Quantity : 1 - Price : 1,00 €

Significance Gel strength is an important quality parameter in various industries, especially in the food industry. For example, in the surimi industry, gel strength is a key factor in determining the texture and quality of surimi-based products like imitation crab meat. It affects...

Thursday, November 09, 2023

Quantity : 1 - Price : 1,00 €

Application A Heat Seal Tester is a device used in the packaging industry to evaluate the heat-sealing properties of various materials, such as films, laminates, and other packaging components. The heat seal strength and integrity of these materials are crucial to ensure the quality...

Thursday, November 09, 2023

Quantity : 1 - Price : 1,00 €

Application The CLRT-02 Carbon Dioxide Volume Tester is well-suited for conducting CO2 volume testing in beverages. It provides a method to uncover the relationship between pressure and temperature, shedding light on how these factors influence carbonation volume. Testing process...

Thursday, November 09, 2023

Quantity : 1 - Price : 1,00 €

Background IEC 60068-2-75 is an international standard that specifically pertains to the testing of mechanical robustness for equipment and products. This standard outlines test methods for determining the ability of a specimen to withstand rigorous and stringent impacts. It is used...

Thursday, November 09, 2023

Quantity : 1 - Price : 1,00 €

Background Plastic film thickness is critically important to check as it directly affects product quality, functionality, cost control, regulatory compliance, and customer satisfaction. Maintaining consistent thickness ensures that the film performs its intended function reliably...

Thursday, November 09, 2023

Quantity : 1 - Price : 1,00 €

Application The FSR-01 Shrink Force and Ratio Tester serves the purpose of measuring both the shrinking forces and shrinkage ratio of heat shrinkable films. These films are typically created through extrusion and stretching (hot drawing) during their manufacturing process, retaining...

Thursday, November 09, 2023

Quantity : 1 - Price : 1,00 €

The FPT-01 Friction and Peel Tester is a versatile and multifunctional device designed for various applications: Measurement of Coefficient of Friction: It accurately measures both static and kinetic coefficients of friction for a wide range of materials, including plastic films, sheets...

Thursday, November 09, 2023

Quantity : 1 - Price : 1,00 €

FDT-01 Falling Dart Impact Tester Background Impact strength is a crucial parameter for assessing the quality of plastic films. It plays a significant role in determining a film's ability to withstand external forces and impacts, which can directly affect its cost and performance...