CUTTING - 6866 ads

Friday, November 16, 2007

The tile forming line includes in hydraulic decoiler, sheet guiding equipment, roll forming system, cutting-pressing equipment, hydraulic station, electric controlling system, safety cover and supporter. Technical Parameters: Material Spec. Aluzinc, pre-coasted steel Yield strength...

Friday, November 16, 2007

Components for the Machine The tile forming line includes in hydraulic decoiler, sheet guiding equipment, roll forming system, cutting-pressing equipment, hydraulic station, electric controlling system, safety cover and supporter. Technical Parameters: Material Spec. Aluzinc, pre-coasted...

Friday, November 09, 2007

Quantity : 2000pcs

Features: 1) Control system: DSP 2) Work size: 600 x 1,200mm 3) Laser tube type: CO2 sealed glass 4) Laser power: 100W 5) Max. speed: 800mm/s 6) Software resolution: 2,500DPI 7) Software: Easycut 4.0 laser engraving system 8) Image form: HPGL, DXF, BMP, DST 9) Driver type: stepper...

Thursday, November 08, 2007

Quantity : 20000pcs

Specifications: 1) Control system: RISC CPU 2) Drive type: stepper motor 3) Media size: 800mm 4) Cutting size: 700mm 5) Cutting speed: 10 ~ 600mm/s 6) Cutting force: 10 ~ 500g 7) LCD display: English 8) Mechanical resolution: 0.0254mm/step 9) Software resolution: 0.0254mm/step 10) Repeatability...

Thursday, November 08, 2007

Quantity : 20000pcs

Specifications: 1) LCD display 2) Maximum paper feed width: 360mm 3) Real cutting range: 260mm 4) Cutting speed: 10 ~ 600mm/s 5) Cutter pressure: 25 ~ 500g 6) Resolution: 0.0254mm 7) Interface type: RS232/USB 8) Bracket: optional 9) Input voltage: 90 ~ 240V Features: 1) Germany stepper motor...

Thursday, November 08, 2007

Quantity : 20000pcs

Specifications: 1) Control system: RISC CPU 2) Drive type: stepper motor 3) Media size: 1,200mm 4) Cutting size: 1,100mm 5) Cutting speed: 10 ~ 600mm/s 6) Cutting force: 10 ~ 500g 7) LCD display: English 8) Mechanical resolution: 0.0254mm/step 9) Software resolution: 0.0254mm/step...

Thursday, November 08, 2007

Quantity : 20000pcs

Specifications: 1) Control system: RISC CPU 2) Drive type: stepper motor 3) Media size: 720mm 4) Cutting size: 630mm 5) Cutting speed: 10 ~ 600mm/s 6) Cutting force: 10 ~ 500g 7) LCD display: English 8) Mechanical resolution: 0.0254mm/step 9) Software resolution: 0.0254mm/step 10) Repeatability...

Tuesday, November 06, 2007

Quantity : 20000pcs

Redsail Mini Cutting Plotter RS450C (With CE) Specifications: 1) Control system: RISC CPU 2) Drive type: stepper motor 3) Media size: 450mm 4) Cutting size: 350mm 5) Cutting speed: 10 ~ 600mm/s 6) Cutting force: 10 ~ 500g 7) LCD display: English 8) Mechanical resolution: 0.0254mm/step...

Tuesday, November 06, 2007

Quantity : 2000pcs

Features: 1) Control system: DSP 2) Work size: 900 x 1,500mm 3) Laser tube type: CO2 sealed glass 4) Laser power: 80W 5) Max. speed: 800mm/s 6) Software resolution: 2,500DPI 7) Software: Easy cut 4.0 laser engraving system 8) Image form: HPGL, DXF, BMP, DST 9) Driver type: stepper...

Saturday, November 03, 2007

Quantity : 2000pcs

Features: 1) Control system: DSP 2) Work size: 600 x 1,200mm 3) Laser tube type: CO2 sealed glass 4) Laser power: 80W 5) Max. speed: 800mm/s 6) Software resolution: 2,500DPI 7) Software: Easycut 4.0 laser engraving system 8) Image form: HPGL, DXF, BMP, DST 9) Driver type: stepper...

Saturday, November 03, 2007

Quantity : 2000pcs

Features: 1) Control system: DSP 2) Work size: 900 x 1,500mm 3) Laser tube type: CO2 sealed glass 4) Laser power: 100W 5) Max. speed: 800mm/s 6) Software resolution: 2,500DPI 7) Software: Easy cut 4.0 laser engraving system 8) Image form: HPGL, DXF, BMP, DST 9) Driver type: stepper...

Saturday, November 03, 2007

ABRASIVES Brown/White/Black/Zirconia Fused Aluminium Oxide,Green Silicon/ Black Carbide, ,Boron Carbide.etc. especially our silicon metal powder with purity Si :98.5%~99.9%. WHEEL/DISC high quality grinding wheel and cutting-off wheel for Metal and Steel Cutting/grinding , Stainless...

Saturday, November 03, 2007

Quantity : 1

1. The machines are easy to operate. Just fix the adjuster of the desired length, and feed the wire/bar into the machine, then the machine automatically produce straight wire/bar of uniformed length at a high speed. Moreover, it rotates smoothly and noiselessly, precise in its measure...

Thursday, November 01, 2007

Model: CT-0.3-1 Wire Dia: 0.3-1mm Length: 300-600mm Speed: 54-108m/min Dimensions: 1000x500x700mm Weight: 1000kg Model: CT-6-14 Steel Dia: 6-14mm, Cutting Length: 3000-12000mm, Speed: 120 m/min Dimensions: 14000x500x1260mm Weight: 3500 kg Model: CT-8-16T Steel Dia: 8-16mm, Cutting Length...

Thursday, November 01, 2007

Quantity : 1

This Line is composed of Wire Release part, Descaler, Lubricate machine, 2 unit “Y” Rolling Mill, LW800 Drawbench, Stress Remove machine, Wire-rewinding machine, water box, Control system. Model : ZJ-12A Input Wire: φ6.5-φ13.5mm Output wire : φ5-φ12mm Speed: 2...

Monday, October 29, 2007

Quantity : 1000kg

Milky quartz tube With the adoption of distinctive technique this milky quartz glass tube has its typical characteristics of good visual aspects and stable physical & chemical properties. It is used as material of infrared heating lamps for heaters, microwave oven, electrical baking oven...

Sunday, October 28, 2007

Vacuum brazed products-- With special diamond brazing technology, diamond is firmly brazed onto the center, which makes its cutting efficiency higher, working life longer, cost lower and performance higher. (1)Vacuum brazed diamond milling bits For milling groove of the inner side of stone...

Sunday, October 28, 2007

Sintered Segmented Saw Blades: Suitable for cutting various hard non-metallic materials, as marble, granite, ceramic, hard concrete, bricks etc. Diameter: 105-350mm. Continuous rim saw blade: Suitable for cutting various hard non-metallic materials, such as marble, granite, ceramic...

Sunday, October 28, 2007

Laser saw blade for General purpose Laser saw blade is designed for general purpose cutting tile, brick, block, slate, stone, concrete, and concrete pipe. On a wide range of masonry and concrete materials, gives superior cutting at a very competitive cost. Used in wet or dry Diameter...

Saturday, October 27, 2007

Welded Wire Mesh , galvanized welded wire mesh ,stainless steel welded wire mesh welded wire mesh is made of selected quality iron wires through the process of automation and sophisticated welding technique. The end product is level and flat, sturdy structure, and even strength throughout...

Saturday, October 27, 2007

Quantity : any

CNC plasma cutting machine can be used to cut metal plate and also can cut under water.high effeciency, high speed,with nesting software can automatic arrange parts on the plate.Location : China, 214192 wuxi, Contact : Liang Wendy, 86 510 85470139

Saturday, October 20, 2007

Argon Arc Welding Gun TIG Welding Torch ~~~ · Argon Arc Welding Nozzle ~~~ · Mobile Spot Welding Gun ~~~ · Transducer,Tungsten-pole Clip Series ~~~ · Damageable Parts On Plasma Arc Cutting Gun ~~~ · CO2 Gauge,Argon Gauge ~~~ · Argon Arc Welding Gun TIG Silicon Rubber Series ~~~ ·...

Saturday, October 20, 2007

Quantity : ISO9001

Advantage High Precision, High Speed, Low Noise and Excellent Performance. Handy: Punch various of shape of sequins, such as Heart-shape, Quincunx, Rhombus, Square, Round etc just need to change the mold. Adjustable punching speed, Highest Speed 600pcs / min. Dual Functionality: Both...

Saturday, October 20, 2007

Quantity : 1 - Price : L/C,T/T or by discus

This machine has two kinds of cutting ways: digital control flame and plasma, otherwise, the material could order automatically! Use of product: This machine is used to cut different figures of metal board. The main parameter: Cutting Range:2.4*2.0m Cutting Speed:0-3500mm/min Cutting Thickness...

Friday, October 19, 2007

We are a very professional bonded & coated abrasives manufacturer with almost 7 years experiences & history. we produce cutting disc for metal, stone, stainless steel, the size from 4"---16". and our disc have two kinds safe standrad: 1) Asian Standrad : 1 reinforce net, 80M/S. 2) Euro Standrad ...

Thursday, October 18, 2007

Quantity : 1

This machine adopts PLC touching screen control system. The power is controlled by pneumatic or step motor. It could insert and cut wire, fatten the mesh and foam board automatically, and the finished product is a steel polystyrene splint. The production line has high automation and...

Saturday, October 13, 2007

This machine adopts PLC touching screen control system. The power is controlled by pneumatic or step motor. It could insert and cut wire, fatten the mesh and foam board automatically, and the finished product is a steel polystyrene splint. The production line has high automation and...

Saturday, October 13, 2007

Quantity : 10

１、 Wide range of materials ２、 Quality finish ３、 No heat in machining process ４、 Environmentally friendly ５、 No tool changing ６、 Minimal burr ７、 Quick to program ８、 Fast...

Saturday, October 06, 2007

Quantity : 500 tons - Price : negotiable

We are pleased to introduce our company M/S Minetech International, a consortium of Mining Engineers, established in the year 1980 in India is mainly focusing on Mining, Trading and Exporting of Industrial Minerals and its allied products. We offer to supply 1. QUARTZ with SiO2 99...

Wednesday, September 26, 2007

Specifications: 1) LCD display 2) Maximum paper feed width: 360mm (14") 3) Real cutting range: 260mm (10.2" x limitless length) 4) Cutting speed: 10 ~ 600mm/s 5) Cutter pressure: 25 ~ 500g 6) Resolution: 0.0254mm 7) Interface type: RS232 8) Bracket: optional 9) Input voltage: 90 ~ 240V Features...