WAVELENGTH - 1255 ads

Friday, August 19, 2022

Zillion Techs InGaAs SWIR camera is based on an in-house developed InGaAs detector with multiple resolutions. The compact GH-SW640-CL meets requirements of high sensitivity in the SWIR range from 900nm to1700nm and with accompanied by extended wavelength from 400nm to 1700nm options...

Friday, August 19, 2022

GH-SW640 InGaAs area image sensors are two-dimensional image sensors that have a hybrid structure consisting of a CMOS readout circuit (ROIC: readout integrated circuit) and back-illuminated InGaAs photodiodes for short wavelength infrared (SWIR, 900nm-1700nm) and extended wavelength...

Friday, August 19, 2022

GH-SW320 InGaAs area image sensors are two-dimensional image sensors that have a hybrid structure consisting of a CMOS readout circuit (ROIC: readout integrated circuit) and back-illuminated InGaAs photodiodes for short wavelength infrared (SWIR, 900nm-1700nm) and extended wavelength...

Friday, August 19, 2022

GH-SW1280 ingaas sensor are two-dimensional image sensors that have a hybrid structure consisting of a CMOS readout circuit (ROIC: readout integrated circuit) and back-illuminated InGaAs photodiodes for short wavelength infrared (SWIR, 900-1700) and extended wavelength infrared (Vis-SWIR...)

Friday, August 19, 2022

At Zillion Techs China Infrared Array Sensor, our clients receive full access to unrestricted performance and full supply-chain control: from the unprocessed starting material (usually epitaxy) to fully packaged China infrared sensor production devices such as IR imagers/cameras, lasers...

Thursday, August 18, 2022

The F-theta scanning lenses are commonly used in laser scanning systems that employ two-axis galvanometers to scan a specified area but cannot tolerate the angle at the image plane. By introducing a specified amount of barrel distortion in a scanning lens, thetelecentric f theta lens...

Thursday, August 18, 2022

Typically opposite of fisheye lens has a front lens group of a greater negative refractive power than an ordinary inverted telephoto wide angle lens, with a large back focal distance. Its extreme power distribution will cause great field curvature in the transmitted image. As fisheye...

Thursday, August 18, 2022

Collimating Lenses Leave A Message! Hyperion Optics Hyperion Optics offers economical custom collimating lens design that can effectively correct spherical and chromatic aberrations, including singlet and chromatic lenses. Many of our clients had experiences where off-the-shelf collimators...

Friday, August 12, 2022

Quantity : 50000-8000 - Price : 8-15USD

GCYFXTY air blown fiber optic cable is a loose tube made of a high modulus material with a 250µm single-mode or multi-mode fiber. The tube is filled with a non-toxic and harmless waterproof compound, and the loose tube is twisted with a non-metallic reinforcing element. Then extruded...

Thursday, August 11, 2022

Used for FC optical fiber ports. Metal sleeves are used for external strengthening and turnbuckles are used for fastening. Generally used on ODF side (most used on distribution frame). Specification of FC Attenuator Fiber Connector FC/UPC Ferrule Type Zirconia Ceramic Connector...

Thursday, August 11, 2022

The ftth fbt fiber optic splitter uses the traditional fused biconical process to disturb two (or more) coated optical fibers in a certain way, melt under high temperature heating, stretch to both sides at the same time, and finally form a special waveguide structure in the form of...

Wednesday, August 03, 2022

As we all know, plants need to use the energy of light for photosynthesis in order to obtain the nutrients necessary for growth and development. Therefore, light is the key to the survival of plants. S960+ Grow Light is a special lamp with specific spectral wavelength designed to...

Wednesday, August 03, 2022

Plants rely on the energy of light for photosynthesis to grow, blossom, and bear fruit. However, due to the ever-changing climate change and light change in nature, plants can not fully absorb the photosynthetic nutrients they need in different growth periods, which brings disadvantages...

Thursday, July 28, 2022

T&S BWDM 3 Ports Device is a kind of FWDM device that can separate C-band and L-band or split C-band into two parts, or split L-band into two parts, which can be used in multi-channel WDM modules Make skip film. Features of Band Separator WDM Device Optical path epoxy-free Low...

Thursday, July 28, 2022

AOC is a cabling technology that accepts the same electrical inputs as a direct attach cable, but uses optical fiber "between the connectors". AOC uses electrical-to-optical conversion on the cable ends to improve speed and distance performance of the cable without sacrificing compatibility...

Thursday, July 28, 2022

T&S Communication TSSP-8525G-xxxC is a single-Channel, Pluggable, Fiber-Optic SPF28 for 25 Gigabit Ethernet and Infiniband EDR Applications. It is a high-performance module for short-range data communication and interconnect applications that operate at 25.78125 Gbps up to 70...

Thursday, July 28, 2022

RFL-C30000XZ The Multi-module CW Fiber Lasers developed by Raycus ranges from 3,000W to 30kW, with high electro-optical conversion efficiency, high light beam quality, high energy density, wide modulation frequency, high reliability, long service life, maintenance-free operation and advantages...

Thursday, July 28, 2022

RFL-P20QE The 20-100W Q-Switched Pulse Fiber Laser Series developed by Raycus is the industrial marking and micromachining laser. This series pulse laser has high peak power, high single-pulse energy and optional spot diameter and can be widely applied in the fields, such as marking...

Thursday, July 28, 2022

RFL-A200D Medium powered fiber delivered direct diode laser is mainly used for heat conduction welding with low material thickness. With heat conduction welding, the laser melts the sheets along the intended joint. The melts of the joint partners merge together and then cool off to...

Thursday, July 28, 2022

RFL-P200 High power pulsed laser series is the latest product developed by Raycus. It has average output of (200-2000W), high single pulse energy, uniform square or circular spot energy distribution, easy to use and maintain. They are the ideal products for mold surface treatment...

Thursday, July 28, 2022

RFL-C2000 It has the advantages of high electro-optical conversion efficiency, good beam quality, high energy density, wide modulation frequency, strong reliability, long life, and maintenance-free operation. It can be widely used in welding, precision cutting, cladding, surface treatment...

Thursday, July 28, 2022

RFL-P2000 High-power pulsed fiber lasers series is the latest product developed by Raycus. It has average output of (200-2000W), high single pulse energy, uniform square or circular spot energy distribution, easy to use and maintain. They are the ideal products for mold surface treatment...

Thursday, July 28, 2022

RFL-C20000TZ The Multi-module CW Fiber Lasers developed by Raycus ranges from 3,000W to 30kW, with high electro-optical conversion efficiency, high light beam quality, high energy density, wide modulation frequency, high reliability, long service life, maintenance-free operation and advantages...

Thursday, July 28, 2022

Functions FCA 18 CWDM fiber optical power meter is specially designed for CWDM system, covering wavelength from 1270nm~1610nm. It measures and monitors optical power and attenuation value of 18 channels from 1270nm to 1610nm. All calibrated wavelengths will be tested simultaneously...

Thursday, July 28, 2022

Functions FHP2 Series best optical power meter is the advanced version of OPM series. It is more functional and intelligent. Under the situation of laboratory, LANs, WANs and CATV as well as long distance optical network. FHP2 series optical power meter together with FHS2 series laser source...

Thursday, July 28, 2022

Functions FHP12 Series Mini Optical Power Meter has compact structure and stable performance and ensures high measuring precision of 850nm, 1300nm, 1310nm, 1490nm, 1550nm and 1625nm wavelength. Used together with optical laser source, it could accurately measure the loss of fiber...

Thursday, July 28, 2022

Functions The FHS2 Series laser source offers excellent stability and portability for accurate fiber optic testing. Dual-wavelength, triple wavelength and quad wavelength laser sources are available. If user tests a fiber with both FHS2 series laser source and FHP2 series power meter...

Wednesday, July 13, 2022

Quantity : 8000pcs/mo - Price : 50usd-8000usd

Suitable for low mag lens coaxial lighting, uniform light spot, high brightness Point Illumination Specification Model Light Color Main Wavelength (nm) Forward Voltage (V) Forward Current (mA) Preview (pdf) XF-ADLED1W white 3.2V 350MA XF-ADLED1R gules 630 2.2V 350MA...

Saturday, July 09, 2022

TCOPTICS, a professional optical mirrors supplier China, offers a wide range of custom optical mirrors types. Broadband dielectric mirrors offer near-total reflection over a wide spectral range and are very durable, whereas metallic mirror coatings have high reflectivity over the...

Saturday, July 09, 2022

As a professional cylindrical lens supplier, we produce different types of cylindrical lens, such as concave/convex cylindrical lens, astigmatism cylindrical lens, and especially widely used to anamorphic compression of LD (laser diode) output beam. You are welcomed to consult the...