SHAFTS - 3319 ads

Thursday, April 23, 2015

Evaporation ,magnetron series rolling vacuum coating machine are mainly used to do the metal film on the surface on the plastic, cloth ,paper, tinsel. Product category: According to the working principle can be divided into the following categories Resistance heating evaporation...

Thursday, April 23, 2015

This equipment mainly used in drill bits, milling cutter, core shaft, blades, precision mould, cutting tools industry, etc. Operational principle: This equipment adopts the vacuum evaporation ion beam technology. This equipment can install two to six different pure metal or alloy...

Thursday, April 23, 2015

Applicable medium can be pure air and noncorrosive gases. CC-A Manual Ultra-high Vacuum Gate Valve uses a handle to drive steel ball shelf ,to perform valve plate open and close action,fold plate by spring force , open then exit. It is used to put through or cut off the air passage...

Thursday, April 23, 2015

EVP series oil free dry scroll vacuum pump is comprised by pump head, motor and basement. The pump head including fixed scrolls, orbiting scroll, main shaft, cooling fans, crank shaft kits, and bracket. It contains two spiral cylinders, one offset and orbiting against the other...

Thursday, April 23, 2015

2BV series water ring vacuum pumps are suitable for pumping the gases and steam. Its suction pressure can reach 33mbar (abs) (i.e. 97 % vacuum degree). If the transformer oil is used as the operating liquid, these pumps are called oil ring vacuum pump and the suction pressure can reach 6...

Thursday, April 23, 2015

2BE3 series liquid ring vacuum pumps are usually used to suction the gas without solid particle, undissolved and noncorrosive gas to generate vacuum and pressure in the closed container. By changing the pump material, they can also be used to suction corrosive gas or use corrosive...

Wednesday, April 22, 2015

Product Information Optimize your turbine efficiency with Dekker's AquaSeal PowerGen condenser-exhauster system. The full recovery 2-stage package is available in capacities from 9-25 SCFM at 1" Hg. Product Features Efficient two-stage design provides excellent performance and condensing...

Wednesday, April 22, 2015

Product Information - - - - - DuoVac High Vacuum Pump and Blower Packages - 265 to 12,000 CFM - - Dependable High Performance Design - DuoVac High Vacuum Pump/Blower Packages are designed for high uptime in demanding applications. Our direct drive air-cooled blower eliminates...

Wednesday, April 22, 2015

2BE series liquid ring vacuum pumps are usually used to suction the gas without solid particle, undissolved and noncorrosive gas to generate vacuum and pressure in the closed container. By changing the pump material, they can also be used to suction corrosive gas or use corrosive...

Wednesday, April 22, 2015

Cone crusher and noise reduction of dust the outstanding achievements of fluidized bed jet mill grinding chamber is surrounded by a high pressure air inlet nozzle specially designed, the clean and dry compressed air from the jet nozzle through the formation of supersonic flow, the...

Thursday, April 16, 2015

Quantity : 1set - Price : 254400rmb

- Specifications - 1.Variable pitch anti-bridging structure 2.Assembling and more reliable use 3.Low noise and long service life 1. Gear directly-connecting driving is adopted for high efficiency; 2. Full stainless steel feeder; variable pitch anti-bridging structure; Imported FC control...

Thursday, April 16, 2015

Quantity : 1set - Price : 304000rmb

- - 1. Gear directly-connecting driving is adopted for high efficiency; 2. Full stainless steel feeder; variable pitch anti-bridging structure; Imported FC control; 3. All stainless steel conditioner with axial steam spraying extends the conditioning and cooking time; 4. Main...

Thursday, April 16, 2015

Quantity : 1set - Price : 34 400,00 €

- Specifications - 1.Twin Screw and Atomizing System; 2.The Filling Seal For Ends of Shaft to Improve Tightness and Prevent From Leakage. 1. The mixing chamber is constituted by twin screw and atomizing system. The filling seal is adopted for ends of shaft to improve tightness...

Thursday, April 16, 2015

Quantity : 1set - Price : 180000rmb

- Specifications - 1.Quick disassembling of die 2.Low noise and long service life 3.Resulting in convenient 1. Gear directly-connecting driving is adopted for high efficiency; 2. Full stainless steel feeder; variable pitch anti-bridging structure; Imported FC control; 3. LL...

Thursday, April 16, 2015

Quantity : 1set - Price : 109600rmb

- Specifications - 1.Electromagnetic converter control 2.Stainless steel conditioner 3.Low noise and long service life. 1. Gear directly-connecting driving is adopted for high efficiency; 2. Full stainless steel feeder; Variable pitch and anti bridging structure; Electromagnetic...

Thursday, April 16, 2015

Quantity : 1set

- - 1. It has compact structure and small overall dimensions of transect and floor space can be saved re markably; 2. Head: Rubber covering technology is adopted for head pulley to increase friction coefficient and improve the driving efficiency; 3.Height of discharging section...

Thursday, April 16, 2015

Quantity : 1set - Price : 30 400,00 €

- Specifications - 1.Suitable For Feed Factory And Especially For Fertilizer Factory; 2.Mixing Time Is 1-3 Minutes.The Homogenity Can Reach 10%. 1. It is suitable for feed factory and fertilizer factory, the best choice for fertilizer factory; < br /> 2. The mixing time is 1-3 minutes...

Thursday, April 16, 2015

The low carbon era cone crusher is how to achieve a win-win situation in the low carbon environmental protection construction era, cone crusher cone crusher recycling can help the enterprise to realize the win-win solution, and can also solve the caused by a series of construction...

Thursday, April 16, 2015

Quantity : 1set

- Specifications - Feed Pellet Machine 1.all parts in conditoner are made of stainless steel 2..Two shafts of conditioners are different in dia FDSP company is professional in machine for nearly 10 years, with the strength of feed pellet line, wood pellet line, fertilizer pellet line...

Thursday, April 16, 2015

Quantity : 1set - Price : 180000rmb

- Specifications - 1.Variable Pitch Anti-Bridging Structure; 2.Imported FC Control,Bearing And Oil Seal In The Main Drive; 3.Precisely-Cast Die. 1. Gear directly-connecting driving is adopted for high efficiency; 2. Full stainless steel feeder; variable pitch anti-bridging structure...

Thursday, April 16, 2015

Quantity : 1set - Price : 172000rmb

- Specifications - 1.Quick disassembling of die 2.Low noise and long service life 3.Resulting in convenient 1. Gear directly-connecting driving is adopted for high efficiency; 2. Full stainless steel feeder; variable pitch anti-bridging structure; Imported FC control; 3. LL...

Thursday, April 16, 2015

Quantity : 1set - Price : 155200rmb

- Specification - SWFL Series Vertical Pulverizer 1.High separating efficiency 2.Granulation adjustable by aspiration air We are manufacturing High Grade Machine Of SWFL Series Vertical Pulverizer including fish Feed Pellet Making Machine and shrimp feed Pellet Making Machine...

Thursday, April 16, 2015

Quantity : 1set - Price : 46400rmb

- Specifications - 1.Suitable For Feed Factory And Especially For Fertilizer Factory; 2.Mixing Time Is 1-3 Minutes.The Homogenity Can Reach 10%. 1. It is suitable for feed factory and fertilizer factory, the best choice for fertilizer factory; < br /> 2. The mixing time is 30-120s...

Thursday, April 16, 2015

Quantity : 1set - Price : 46400rmb

- Specifications - 1.Suitable For Feed Factory And Especially For Fertilizer Factory; 2.Mixing Time Is 1-3 Minutes.The Homogenity Can Reach 10%. 1. It is suitable for feed factory and fertilizer factory, the best choice for fertilizer factory; < br /> 2. The mixing time is 30-120s...

Thursday, April 16, 2015

Quantity : 1set - Price : 35200rmb

- Specifications - 1.Gear Directly-Connecting Driving,NCC Guaranteed; 2.Electromagnetic Converter Control; 3.Full Stainless Steel Conditioner. 1. Gear directly-connecting driving is adopted for high efficiency; 2. Full stainless steel feeder; Variable pitch and anti bridging structure...

Wednesday, April 15, 2015

Hookah, zinc alloy hookah,nargile hookah , Height,69cm,from top bowl to base bottom customer design is ok, hose, 1pcs, 1.5m/1.8m,color in accordance with style hookah set include,ceramic bowl,hose,shaft,ashtray,rubber,tong,glas s base. payment,30% by T/T in advance, balance against...

Wednesday, April 15, 2015

Introduction Pile Integrity Tester With Reflection Wave Method is an intelligent and portable analyzer for pile foundation detection with such capabilities as signal acquisition, data analysis and processing, and storage and output of results. This instrument mainly uses a reflected...

Sunday, April 12, 2015

2, process scheme shows that device belongs to the pressure control system, which mainly comprises a water storage tank, a buffer voltage regulator tube, double water supply pipe, high pressure centrifugal pumps (one with a prepared), preheater to high temperature fan duct,2, process...

Thursday, April 09, 2015

Quantity : 88

Features: 1).Compact structure,space effective and much shorter axial dimensions. 2).Small vibration and low noise,achieved mainly by means of the following: A.The pump casing adopts the double-volute structure; B.The rotor part has short axial dimensions and a good rigidity; C...

Wednesday, April 08, 2015

Quantity : 1121 - Price : 4 454,00 €

impact crushing process of the adinarayana stone crushing industry visakhapatnam with "stone against stone" . it is mainly used for medium and fine crushing , especially in crushing iron ore and quartz stone. mechanism and criteria of crushing sand near loosening sand stone aquifer ...

Wednesday, April 08, 2015

Quantity : 112 - Price : 4 454,00 €

an inclined or vertical shaft or passage between levels in a mine. study on vertical structural stability of super-deep bored shaft submerged in slurry . the circular tube belt conveyor is a new method for hoisting coal in a vertical shaft. finite element structural analysis for the...

Tuesday, April 07, 2015

Quantity : 1set

1. Gear directly-connecting driving is adopted for high efficiency; 2. Full stainless steel feeder; variable pitch anti-bridging structure; Imported FC control; 3. LL stainless steel conditioner with axial steam spraying extends the conditioning and cooking time; 4. Main gear...

Tuesday, April 07, 2015

Quantity : 1set

1. Gear directly-connecting driving is adopted for high efficiency; 2. Full stainless steel feeder; Variable pitch and anti bridging structure; Electromagnetic converter control; 3. Stainless steel conditioner; axial steam spraying extends the conditioning time and cooking effect; 4...

Saturday, April 04, 2015

Our main products include cotton processing saw, spacer block, gin rib, delinter rib, brushes, channel saw, baling wire and we can processing feed bar, roller, saw shaft, grid bar and other products with customs drawings. Location : No.626,North Fuhe Street,Handan City Hebei Province...

Saturday, April 04, 2015

Our main products include cotton processing saw, spacer block, gin rib, delinter rib, brushes, channel saw, baling wire and we can processing feed bar, roller, saw shaft, grid bar and other products with customs drawings. Location : No.626,North Fuhe Street,Handan City Hebei Province...

Saturday, April 04, 2015

Our main products include cotton processing saw, spacer block, gin rib, delinter rib, brushes, channel saw, baling wire and we can processing feed bar, roller, saw shaft, grid bar and other products with customs drawings. Location : No.626,North Fuhe Street,Handan City Hebei Province...

Saturday, April 04, 2015

Our main products include cotton processing saw, spacer block, gin rib, delinter rib, brushes, channel saw, baling wire and we can processing feed bar, roller, saw shaft, grid bar and other products with customs drawings. Location : No.626,North Fuhe Street,Handan City Hebei Province...

Thursday, April 02, 2015

Quantity : 1set

1. Gear directly-connecting driving is adopted for high efficiency; 2. Full stainless steel feeder; Variable pitch and anti bridging structure; Electromagnetic converter control; 3. Stainless steel conditioner; axial steam spraying extends the conditioning time and cooking effect; 4...

Thursday, April 02, 2015

Quantity : 1set

1. Gear directly-connecting driving is adopted for high efficiency; 2. Full stainless steel feeder; variable pitch anti-bridging structure; Imported FC control; 3. LL stainless steel conditioner with axial steam spraying extends the conditioning and cooking time; 4. Main gear and...

Thursday, April 02, 2015

Quantity : 1set

1. Gear directly-connecting driving is adopted for high efficiency; 2. Full stainless steel feeder; variable pitch anti-bridging structure; Imported FC control; 3. LL stainless steel conditioner with axial steam spraying extends the conditioning and cooking time; 4. Main gear and...

Thursday, April 02, 2015

Quantity : 1set

1. Gear directly-connecting driving is adopted for high efficiency; 2. Full stainless steel feeder; variable pitch anti-bridging structure; Imported FC control; 3. LL stainless steel conditioner with axial steam spraying extends the conditioning and cooking time; 4. Main gear and...

Thursday, April 02, 2015

Quantity : 1set

1. Gear directly-connecting driving is adopted for high efficiency; 2. Full stainless steel feeder; variable pitch anti-bridging structure; Imported FC control; 3. LL stainless steel conditioner with axial steam spraying extends the conditioning and cooking time; 4. Main gear...

Thursday, April 02, 2015

Quantity : 1set

1. Gear directly-connecting driving is adopted for high efficiency; 2. Full stainless steel feeder; variable pitch anti-bridging structure; Imported FC control; 3. LL stainless steel conditioner with axial steam spraying extends the conditioning and cooking time; 4. Main gear...

Thursday, April 02, 2015

Quantity : 1set

1. Gear directly-connecting driving is adopted for high efficiency; 2. Full stainless steel feeder; variable pitch anti-bridging structure; Imported FC control; 3. LL stainless steel conditioner with axial steam spraying extends the conditioning and cooking time; 4. Main gear...

Thursday, April 02, 2015

Quantity : 1set

1. Gear directly-connecting driving is adopted for high efficiency; 2. Full stainless steel feeder; variable pitch anti-bridging structure; Imported FC control; 3. LL stainless steel conditioner with axial steam spraying extends the conditioning and cooking time; 4. Main gear and...

Thursday, April 02, 2015

Quantity : 1set

1. Pulverizing-disc structure, resulting in high capacity. 2. High separating efficiency. 3. Main shaft bearing air cooled. 4. Quick changing of pulverizing knifes. 5. Granulation adjustable by aspiration air. 6. Fineness from 60-200 meshes. 7. Silencer (option) reducing noise...

Thursday, April 02, 2015

1.Two shafts of conditioners are different in diameter and rotational speed showing a different movement with opposite rotation direction, which makes the materials, steam and liquid be fully mixed, sheared and intersected by paddles of two shafts; 2.The max conditioning time can...

Thursday, March 26, 2015

Equipment wear will seriously affect the service life of equipment, some users of long-term use but not to do maintenance, resulting in equipment wear the more and more serious, and ultimately can not operate normally, this will increase the investment cost to a great extent, so...

Thursday, March 26, 2015

When the equipment production problems, may be due to the effect of larger noise lead to find that we cannot technology, so that it may produce a safety problem, cause harm to personal safety of operators.When the equipment production problems, may be due to the effect of larger...

Thursday, March 26, 2015

4, fixed people who are examined, is the production of workers, maintenance staff or staff or technical personnel, should according to the inspection site and the technology requirements, the accuracy requirements, to implement.4, fixed people who are examined, is the production of workers...

Wednesday, March 18, 2015

Quantity : 41 - Price : 97 548,00 €

use of the vertical shaft hammer how much is a portable gold crusher in erdaogou gold mining company . the functions of the heavy apron-feeder modulus for semi-portable how much is a portable gold crusher station is emphatically discussed in this paper. based on actual situation...

Tuesday, March 17, 2015

Quantity : 9999 - Price : 9 999,00 €

the jaw stone live stone crusher plant is driven by the pulley belt and it's speed is very high. the jaw stone live stone crusher plant is widely used in the mining machinery and coal mine machine. selected belt type according to the actual power of the jaw stone live stone crusher...

Monday, March 09, 2015

http://www.doucci.com/crankshaft-position-sensor/2457-06a906433f-078906433a-06a906433c-skoda-fabia-octavi a-superb-crankshaft-crank-shaft-position -angle-sensor-.html Contact info: Web: www.doucci.com Email: doucci@hotmail.com Skype: kingbosi03 Whatsapp: 008615112272664 We are 100%...

Monday, March 09, 2015

http://www.doucci.com/crankshaft-position-sensor/2456-56027866ab-new-crankshaft-crank-shaft-position-sens or-for-1997-01-jeep-cherokee-40l-.html Contact info: Web: www.doucci.com Email: doucci@hotmail.com Skype: kingbosi03 Whatsapp: 008615112272664 We are 100% ensure that each crankshaft...

Tuesday, March 03, 2015

Quantity : 200 kit

Features · Taped catheter tip and smooth transition of the diameter for entering tortuous vessels · Inherent balloon memory for multiple inflations and deflations · Special "Super-LubeTM" coating to enhance the catheter crossibility · Co-wire shaft design to exhibit decent pushability...

Tuesday, March 03, 2015

Quantity : 200 kit

Features · Extremely low balloon compliance designed for post-dilatation after DES · Strengthened balloon material selected for high pressure challenge during PCI · Low profile dilatation catheter for optimal tracking and crossing · Technical Specifications Catheter Type RX Prox...

Tuesday, March 03, 2015

Quantity : 200

Features: · Extremely low balloon crossing profile of 0.0215” · “Super-LubeTM” coating for navigating into small vessels Technical Specifications Usable Catheter Length 142mm Catheter Type RX Balloon Profile 0.0215” Tip Profile 0.016” Tip Length 2.0mm Marker...

Tuesday, March 03, 2015

Quantity : 200 kit

Features · 3cm flexible tip makes tip easy to deflect · Elastic and shape-resistance distal core and lubricious coating provide great accessibility and ex cellent steerability · Supportive proximal shaft increases pushability Ordering information: REF Description YM-GW-3S32150P-TB...

Tuesday, March 03, 2015

Quantity : MOQ: 100pc

- Introduction: - Size: 30 inches x 8K - Material: pongee fabric - Frame: full fiberglass - Shaft: fiber - Handle: EVA - Open style: auto-open - Customized designs are accepted - Various colors are available - Features: - Light - Waterproof - Windproof -...

Tuesday, March 03, 2015

Quantity : MOQ: 100pc

- Introduction: - Size: 30 inches x 8K - Materials: nylon and UV-coated - Frame: full fiber - Shaft: fiber - Handle: EVA - Open style: manual open - Customized designs are accepted - Various colors are available - Packaging: - 103x28x30cm - 50pcs/ctn - 30kgs/ctn...

Tuesday, March 03, 2015

Quantity : MOQ: 100pc

- Introduction: - Size: 30 inches x 8K - Materials: nylon and UV-coated - Frame: full fiber - Shaft: fiber - Handle: EVA - Open style: manual open - Customized designs are accepted - Any colors are available - Packaging: - 103x28x30cm - 50pcs/ctn - 28kgs/ctn - Features...

Tuesday, March 03, 2015

Quantity : MOQ: 100pc

- Introduction: - Size: 30 inches x 8K - Material: pongee fabric - Frame: full fiber - Shaft: fiber - Handle: I EVA - Open style: manual open - Customized designs are accepted - Any colors are available - Features: - Light - Waterproof - Windproof - Not...

Tuesday, March 03, 2015

Quantity : MOQ: 100pc

- Introduction: - Size: 21 inches x 8K - Material: pongee fabric - Frame: metal - Shaft: 3-section aluminum - Handle: plastic - Open style: manual-open - Customized designs are accepted - Various colors are available - Features: - Light - Anti-UV - Daily use...

Tuesday, March 03, 2015

Quantity : MOQ: 100pc

- Introduction: - Size: 21 inches x 8K - Material: UV coating - Frame: metal - Shaft: 3-section aluminum - Handle: plastic - Open style: manual-open - Customized designs are accepted - Various colors are available - Features: - Light - Anti-UV - Daily use...

Tuesday, March 03, 2015

Quantity : MOQ: 100pc

- Introduction: - Size: 21 inches x 8K - Material: Jewelory - Frame: metal - Shaft: 3-section aluminum - Handle: plastic - Open style: manual-open - Customized designs are accepted - Various colors are available - Features: - Light - Anti-UV - Daily use -...

Tuesday, March 03, 2015

Quantity : MOQ: 100pc

- Introduction: - Size: 26 inches x 16K - Material: pongee fabric with bound - Frame: black metal fluted ribs - Shaft: wooden - Handle: J/I wooden - Open style: auto-open - Customized designs are accepted - Any colors are available - Features: - Strong - Waterproof...

Tuesday, March 03, 2015

- Introduction: - Size: 22 inches x 8K - Material: PVC fabric - Frame: metal frame with fiber ribs - Shaft: metal - Handle: plastic - Open style: auto-open - Customized designs are accepted - Features: - Light - For daily use - Fashion and fresh - Ideal for...

Tuesday, March 03, 2015

Features: Size: 21 inches x 8K Material: pongee fabric Frame: automatic frame with fiber ribs Shaft: 3 sections Handle: rubber curved handle Open style: automatic auto opening and closing Customized designs and sizes are accepted Various colors are available Suitable for...

Tuesday, March 03, 2015

Quantity : MOQ: 100pc

- Introduction: - Size: 22 inches x 16K - Material: UV coating - Frame: metal with black plating - Shaft: metal - Handle: plastic - Open style: manual open - Customized designs are accepted - Any colors are available - Features: - Strong - Windproof - Anti-UV...

Tuesday, March 03, 2015

Quantity : MOQ: 100pc

- Introduction: - Size: 30 inches x 8K - Material: pongee fabric - Frame: full fiber ribs - Shaft: fiber - Handle: J rubber/I EVA - Open style: auto-open - Customized designs are accepted - Any colors are available - Features: - Light - Waterproof - Windproof...

Tuesday, March 03, 2015

Quantity : 100pcs - Price : USD3.17-3.37

- Introduction: - Size: 30 inchesx8K - Material: pongee fabric - Frame: full fiber - Shaft: fiber - Handle: I EVA - Open style: munual-open - Customized designs are accepted - Any colors are available - Features: - Light - Waterproof - Windproof - Not easy...

Tuesday, March 03, 2015

Quantity : 100pcs - Price : USD2.88-3.17

- Introduction: - Size: 23 inches x 16K - Material: pongee fabric - Frame: metal with black plated - Shaft: aluminum - Handle: J/I aluminum - Open style: auto-open - Customized designs are accepted - Any color available - Features: - Strong - Waterproof - Windproof...

Tuesday, March 03, 2015

Quantity : MOQ: 100pc

- Introduction: - Size: 23 inches x 16K - Material: pongee fabric - Frame: metal with black-plated - Shaft: metal - Handle: J/I plastic - Open style: manual open - Customized designs are accepted - Any colors are available - Features: - Strong - Waterproof ...

Tuesday, March 03, 2015

Quantity : MOQ: 100pc

- Specification: - Size: 22 inches x 16K - Material: UV coating - Frame: metal - Shaft: metal - Handle: J/I plastic - Open style: manual open - Customized designs are accepted - Any colors are available - Features: - Strong - Windproof - Joint - UV-anti...

Tuesday, March 03, 2015

Quantity : MOQ: 100pc

- Introduction: - Size: 23 inches x 16K - Material: pongee fabric with bound - Frame: metal with black plated - Shaft: metal - Handle: J plastic - Open style: auto-open - Customized designs are accepted - Any colors are available - Features: - Strong - Waterproof...

Tuesday, March 03, 2015

Quantity : MOQ: 100pc

- Introduction: - Size: 22 inches x 16K - Material: rainbow pongee fabric - Frame: metal with black plated - Shaft: metal - Handle: wrapping handle - Open style: auto-open - Customized designs are accepted - Various colors are available - Features: - Strong -...

Sunday, February 01, 2015

Our gear type: spur gear, helical gear, , spiral bevel gear, gear shaft, rack gear. Material: casting steel, casting iron, casting bronze. Max diameter: 12 Max module: 60mm Location : F/32 No.1 Building Zhonggang Sqaure Gaoxin District, 114043 Anshan, Contact : Sarah Song, +864127105719

Sunday, February 01, 2015

WEIELECTRICcom Battery Jackets Battery sleeve tubes, Laminated tubing ,Thinwall tubing,thread tubes,spiral wound tubes insulation Kraft paper tube Made out of paper or films ,from medium density, neutral, natural, high quality, electrical grade papers that have been specifically...

Wednesday, January 28, 2015

Quantity : 100 - Price : 100＄

Komatsu original car parts, new parts all can provide. Komatsu hydraulic pump assembly and components, pump casing, pump bravery, valve plate, inclined plate, plunger, swash plate, swing, swing, plunger, nine orifice plate, copper head, pump shaft before and after pump shaft, intermediates...

Wednesday, January 28, 2015

Quantity : 100 - Price : 100＄

Komatsu original car parts, new parts all can provide. Komatsu hydraulic pump assembly and components, pump casing, pump bravery, valve plate, inclined plate, plunger, swash plate, swing, swing, plunger, nine orifice plate, copper head, pump shaft before and after pump shaft, intermediates...

Wednesday, January 14, 2015

Quantity : 1 set - Price : $ 3000

Product Description The specific features as follows: 1.Compatible automated production line can realize unmanned operation. 2. The vertical strip cutting machine can overcome the mud dump, increase production, save 7-15% energy, reduces one or two staffs and decrease working wear...

Tuesday, January 13, 2015

Quantity : 200000000 - Price : 0,10 €

- - STO auto shaft Seal, wheel hub oil seals There are over 3000 molds of products, including auto oil seals and valve seals forJapanese cars, European cars and American cars etc. Also there are models of motorcycle oil seals,valve seals,cam guide roller,drum rubber, for k bush...

Tuesday, January 13, 2015

Quantity : 200000000 - Price : 0,10 €

STO auto shaft Seal, wheel hub oil seals There are over 3000 molds of products, including auto oil seals and valve seals forJapanese cars, European cars and American cars etc. Also there are models of motorcycle oil seals,valve seals,cam guide roller,drum rubber, for k bush,fork seal, etc...

Wednesday, December 31, 2014

WEIELECTRICcom Battery Jackets Battery sleeve tubes, Laminated tubing ,Thinwall tubing,thread tubes,spiral-wound tubes insulation Kraft paper tube Made out of paper or films ,from medium density, neutral, natural, high quality, electrical grade papers that have been specifically...

Saturday, December 27, 2014

Quantity : 1 - Price : 5000usd

Features: 1. Wide Production Range: Inner Diameter from 200-2500mm, length 1-4 meter; 2. Different Pipe end joint: Flat end; Male&Female end; Spigot&Socket end; 3. High efficiency, short production time, every pipe needs several minutes; 4. With hard dry casting concrete...

Wednesday, December 24, 2014

Quantity : 5000 PER M - Price : 200-500US dollors ac

Skype: maggie.liweigroup Expansion Joint Stainless Steel Introduction of Expansion Joint Stainless Steel Expansion Joint Stainless Steel (they are also called compensators) are compensating elements for thermal expansion and relative movement in pipelines, containers and machines...

Wednesday, December 24, 2014

Quantity : 5000 PER M - Price : 200-500US dollors ac

Skype: maggie.liweigroup Expansion Joint Stainless Steel Introduction of Expansion Joint Stainless Steel Expansion Joint Stainless Steel (they are also called compensators) are compensating elements for thermal expansion and relative movement in pipelines, containers and machines...

Tuesday, December 23, 2014

Quantity : 1-1000sets - Price : $1-900

The trunnion mounted ball valve is a new generation high-performance ball valve, suitable for long t ransportation pipelines and ordinary industrial pipelines. Special consideration has been given to i ts strength, safety, resistance to severe conditions during design. It is suitable...

Tuesday, December 23, 2014

Quantity : 1-1000sets - Price : 10-900$

The trunnion mounted ball valve is a new generation high-performance ball valve, suitable for long t ransportation pipelines and ordinary industrial pipelines. Special consideration has been given to i ts strength, safety, resistance to severe conditions during design. It is suitable...

Friday, December 19, 2014

Quantity : MOQ: 100pc

- Introduction: - Size: 22 inches x 16K - Material: pongee fabric - Frame: metal with black plated - Shaft: metal - Handle: wrapping handle - Open style: auto-open - Customized designs are accepted - Various colors are available - Features: - Strong - Waterproof...

Thursday, December 18, 2014

Quantity : with gearm

- P Series Planetary Gear Units - - P Series Planetary Gear Units - Power range: 0.5∼14000kW Transmission ration range: 25∼4000 Torque range: 22∼2600kN.m - Features - ◆ Highly modular design. ◆ Quality material ensures the product reliability. ◆ Fluctuation structure design...

Wednesday, December 17, 2014

Promotional W1 99.95% tungsten rolling bright strip on sale Product Description Item name Tungsten plate Standard ASTM B760, GB/T 3875-83 Specification Dia300x2mm Application Industrial Surface Bright surface Processing Rolling MOQ 1kg Features: 1.high...

Saturday, December 13, 2014

Quantity : 20 - Price : Negotiable

Engine Atlas LLC is specialized company that provides services to Marine, offshore platforms, and Engine customers. We are unique in technical support, repair and largest supplier of equipment and spare parts. You can visit our website to see more detail about our products, performance...

Saturday, December 13, 2014

Quantity : 20 - Price : Negotiable

Engine Atlas LLC is specialized company that provides services to Marine, offshore platforms, and Engine customers. We are unique in technical support, repair and largest supplier of equipment and spare parts. You can visit our website to see more detail about our products, performance...

Saturday, December 13, 2014

Quantity : 10 - Price : Negotiable

Engine Atlas LLC is specialized company that provides services to Marine, offshore platforms, and Engine customers. We are unique in technical support, repair and largest supplier of equipment and spare parts. You can visit our website to see more detail about our products, performance...

Friday, December 12, 2014

Quantity : 500 PER MO - Price : 200-500US dollors ac

Skype: kelly Henan Liwei Industry Co., Ltd: 1. Since 1988, manufacturer and exporter of bellows expansion joints in China; 2. The Main Drafting Committee of National Standard for Bellows Expansion Joints; 3. Qualified Supplier for CGN Nuclear Power Plant; 4. ISO9001: 2008 and ISO14001...

Friday, December 12, 2014

Quantity : 500 PER MO - Price : 200-500US dollors ac

Skype: kelly Henan Liwei Industry Co., Ltd: 1. Since 1988, manufacturer and exporter of bellows expansion joints in China; 2. The Main Drafting Committee of National Standard for Bellows Expansion Joints; 3. Qualified Supplier for CGN Nuclear Power Plant; 4. ISO9001: 2008 and ISO14001...

Friday, December 12, 2014

Quantity : 500 PER MO - Price : 200-500US dollors ac

Skype: kelly Henan Liwei Industry Co., Ltd: 1. Since 1988, manufacturer and exporter of bellows expansion joints in China; 2. The Main Drafting Committee of National Standard for Bellows Expansion Joints; 3. Qualified Supplier for CGN Nuclear Power Plant; 4. ISO9001: 2008 and ISO14001...

Friday, December 12, 2014

Quantity : 500 PER MO - Price : 200-500US dollors ac

Skype: kelly Henan Liwei Industry Co., Ltd: 1. Since 1988, manufacturer and exporter of bellows expansion joints in China; 2. The Main Drafting Committee of National Standard for Bellows Expansion Joints; 3. Qualified Supplier for CGN Nuclear Power Plant; 4. ISO9001: 2008 and ISO14001...

Friday, December 12, 2014

Quantity : 500 PER MO - Price : 200-500US dollors ac

Skype: kelly Henan Liwei Industry Co., Ltd: 1. Since 1988, manufacturer and exporter of bellows expansion joints in China; 2. The Main Drafting Committee of National Standard for Bellows Expansion Joints; 3. Qualified Supplier for CGN Nuclear Power Plant; 4. ISO9001: 2008 and ISO14001...

Friday, December 12, 2014

Quantity : 500 PER MO - Price : 200-500US dollors ac

Skype: kelly Henan Liwei Industry Co., Ltd: 1. Since 1988, manufacturer and exporter of bellows expansion joints in China; 2. The Main Drafting Committee of National Standard for Bellows Expansion Joints; 3. Qualified Supplier for CGN Nuclear Power Plant; 4. ISO9001: 2008 and ISO14001...

Friday, December 12, 2014

Quantity : 500 PER MO - Price : 200-500US dollors ac

Skype: kelly Henan Liwei Industry Co., Ltd: 1. Since 1988, manufacturer and exporter of bellows expansion joints in China; 2. The Main Drafting Committee of National Standard for Bellows Expansion Joints; 3. Qualified Supplier for CGN Nuclear Power Plant; 4. ISO9001: 2008 and ISO14001...

Friday, December 12, 2014

Quantity : 500 PER MO - Price : 20-100US dollors acc

Skype: kelly Henan Liwei Industry Co., Ltd: 1. Since 1988, manufacturer and exporter of bellows expansion joints in China; 2. The Main Drafting Committee of National Standard for Bellows Expansion Joints; 3. Qualified Supplier for CGN Nuclear Power Plant; 4. ISO9001: 2008 and ISO14001...

Thursday, December 11, 2014

Quantity : 99 - Price : 53 200,00 €

--!Design by Jacky Wong Shanghai Changlei M.C. Ltd.!-- http://www.jawcrushermachinery.com/ manager, Wang Shuilin 0086-21-61901270 0086-21-61901272 phone: +8613012883706 201306 No. 158,Shengang Avenue,Lingang new city,Pudong new district, Shanghai, China Room 230, 456, Liangxin Road...

Thursday, December 11, 2014

Tungsten Carbide Sleeve We have many kinds of tungsten carbide bushing products, with good materials, excellent performance and good wear resistance. To make our products high machining accuracy, keeping operation precision, prolong the life time of rolling axletree, we strictly...

Wednesday, December 10, 2014

Turbine shaft has one shaft lever and one turbine wheel. One turbine shaft can endure high heat which is made by heat-resisting material. A good turbine shaft makes good performance ,reliability structure and long- working life of one turbocharger. A-WIN TURBO TECHNIK can offer...

Wednesday, December 10, 2014

Quantity : 1 - Price : 50,00 €

Skype: kelly Henan Liwei Industry Co., Ltd: 1. Since 1988, manufacturer and exporter of bellows expansion joints in China; 2. The Main Drafting Committee of National Standard for Bellows Expansion Joints; 3. Qualified Supplier for CGN Nuclear Power Plant; 4. ISO9001: 2008 and ISO14001...

Wednesday, December 10, 2014

Quantity : 1 - Price : 50,00 €

Skype: kelly Henan Liwei Industry Co., Ltd: 1. Since 1988, manufacturer and exporter of bellows expansion joints in China; 2. The Main Drafting Committee of National Standard for Bellows Expansion Joints; 3. Qualified Supplier for CGN Nuclear Power Plant; 4. ISO9001: 2008 and ISO14001...

Wednesday, December 10, 2014

Quantity : MOQ: 100pc

- Features: - Size: 23 inches x 16K - Material: rainbow pongee fabric - Frame: metal - Shaft: metal (14mm) - Handle: rubber - Opening style: auto-open - Customized designs and sizes are accepted - Different colors are available - Wind-protected function - The...

Wednesday, December 10, 2014

Quantity : MOQ: 100pc

- Features: - Size: 23 inches x 16K - Material: pongee fabric - Frame: metal - Shaft: metal (14mm) - Handle: J/I rubber - Opening style: auto-open - Customized designs and sizes are accepted - Different colors are available - Wind-protect function - The handle...

Saturday, December 06, 2014

1. 4-cylinder engine with low energy consumption and large torque reserve; 2. Reliable and durable transmission system, with 8F+2R speed; 3. Excellent leak tightness, especially appropriate for operations in paddy fields; 4. Disc brake device makes for outstanding brake performance; 5...

Saturday, December 06, 2014

1. 2-cylinder engine with low energy consumption, 3 or 4 cylinder engine is optional; 2. Reliable and durable transmission system, with 8F+2R speed; 3. ROPS, air brake, and 1 or 2 way SCV (hydraulic outlets) are optional; 4. Uses single stage clutch, dual clutch is optional; 5...

Wednesday, December 03, 2014

- Turbocharger - A turbocharger comprises of a compressor and a turbine. The turbine and compressor wheels are mounted on a common shaft. This sub-assembly is housed in the central housing. The turbocharger turbine consists of the turbine wheel and the turbine housing. The engineer...

Tuesday, November 25, 2014

Quantity : MOQ: 100pc

- Introduction: - Size: 23 inches x 16K - Material: pongee fabric with edge and bound - Frame: metal with black plated - Shaft: metal - Handle: J plastic - Open style: auto-open - Customized designs are accepted - Any colors are available - Features: - Strong...

Tuesday, November 25, 2014

Quantity : 500000/ ye - Price : 1,00 €

SWC type cross shaft universal coupling used in rolling mill main drive and auxiliary transmi ssion, also suitable for hoisting machinery, mining machinery, engineering machinery, petroleum mach inery, vehicle, ship propulsion system, paper making machinery, particularly provides...

Saturday, November 22, 2014

China Manufacturer Crank shaft www(dot)sebon-autoparts.com/Engine-Parts /China-Manufacturer-Crankshaft.html Crank shaft is main rotating parts of engine, is installed on the connecting rod, can undertake of connecting rod (reciprocating) up and down movement into circulation movement (rotation)...

Saturday, November 22, 2014

Benefits of connecting rod www(dot)sebon-autoparts.com/Engine-Parts /Chinese-hot-Connecting-rod.html Overview of connecting rod: For example in the reciprocating piston type machinery and compressor, with connecting rod to connect the piston and crank. Connecting rod of steel, the...

Wednesday, November 19, 2014

Quantity : MOQ: 100pc

- Introduction: - Size: 23 inches x 8K - Material: pongee fabric - Frame: metal with black plated - Shaft: metal - Handle: J/I plastic - Open style: manual open - Customized designs are accepted - Any color is available - Features: - Strong - Waterproof - ...

Tuesday, November 18, 2014

Quantity : 25 sets pe - Price : 5000--20000USD per s

mining vibrating feeder advantages: 1. Stable vibration, reliable operation and long life; 2. can adjust the exciting force, can be changed and control traffic at any time, convenient adjustment and stability; 3. vibration motor as the source of vibration, low noise, low of power consumption...

Tuesday, November 18, 2014

Quantity : 20 sets pe - Price : 4000--50000USD per m

Introduction of roller crusher: The main structure of the wheel gearing is composed of fixed roll, movable roll, drive shaft, machine box, chassis, cover piece and long gear cover. The motive power of the machine comes from the V-belt pulley of the electromotor, and a pair of middle...

Tuesday, November 18, 2014

Quantity : 30 sets pe - Price : 2000--100000USD per

Product description: PE Jaw Crusher is our company set the successful experience in similar products at home and abroad, for mining, smelting, building material, highway, railway, water conservancy, road construction and other industrial sectors quarries and rock crusher specially designed...

Tuesday, November 18, 2014

Quantity : 30 sets pe - Price : 2000-40000USD

Company Introduction: Our factory is a manufacturer and exporter of mining machinery in China. Our main products are grinding mill, briquetting machine,sand making production line, stone production line, magnetic separating production line, Flotation separating production line...

Saturday, November 15, 2014

Quantity : MOQ: 100pc

- Introduction: - Size: 22 inches x 16K - Material: UV coating fabric - Frame: metal with black plated - Shaft: metal - Handle: J/I plastic - Open style: manual open - Customized designs are accepted - Features: - Strong - Anti sunshine - Wind-resistant - ...

Tuesday, November 11, 2014

Quantity : MOQ: 100pc

- Specifications: - Size: 23 inches x 8K - Material: pongee fabric - Frame: black metal fluted ribs - Shaft: metal - Handle: plastic - Open style: manual open - Customized designs are accepted - Any colors are available - Features: - Strong - Windproof - Waterproof...

Saturday, November 08, 2014

Quantity : Teeth-shaf

With small radial size, teeth-shaft coupling have heavy load, so it always be used shaft drive under low speed and heavy load, high precision teeth-shaft coupling can be used in high speed transmission, like shaft driving of pressure turbine. As compensation angle of drum shaped...

Saturday, November 08, 2014

With small radial size, teeth-shaft coupling have heavy load, so it always be used shaft drive under low speed and heavy load, high precision teeth-shaft coupling can be used in high speed transmission, like shaft driving of pressure turbine. As compensation angle of drum shaped...

Friday, November 07, 2014

Stainless steel thrust ball bearing and chrome steel thrust ball bearing is a particular type of rotary ball bearing. Like other ball bearings, they permit rotation between parts, but they are designed to support a high axial load while doing this (parallel to the shaft). Higher...

Wednesday, November 05, 2014

Quantity : MOQ: 100pc

- Introduction: - Size: 30 inches x 8K - Material: nylon and UV-coated fabric - Frame: full fiber ribs - Shaft: fiber - Handle: J rubber/I EVA - Open style: auto-open - Customized designs are accepted - Any colors are available - Features: - Light - Waterproof...

Wednesday, November 05, 2014

Quantity : MOQ: 100pc

- Introduction: - Size: 22 inches x 16K - Material: UV coated fabric - Frame: metal with black plating - Shaft: metal - Handle: J/I plastic - Opening style: manual open - Customized designs are accepted - Different colors are available - It can be printed with...

Saturday, November 01, 2014

Quantity : MOQ: 100pc

- Introduction: - Size: 30 inches x 8K - Material: pongee fabric - Frame: full fiber ribs - Shaft: fiber - Handle: J rubber/I EVA - Open style: auto-open - Customized designs are accepted - Any colors are available - Features: - Light - Waterproof - Windproof...

Wednesday, October 22, 2014

C50 steel is high-quality carbon structural steel under the standard EN 10083-2. 1. EN10083-2 C50 steel characteristics: C50 is high strength medium carbon steel and it's cold deformation plasticity is low. Welding performance and hardenability is poor for C50 steel. But its no...

Wednesday, October 22, 2014

C40 steel is a kind of high-quality carbon structural steel under the standard EN 10083-2. Henan bebon international is C40 steel supplier, we stock all kinds of sizes C40 steel in our warehouse. 1. EN 10083-2 C40 steel equivalent materials: DIN C40, BS 080M40, EN8, GOST 40, AISI 1040...

Tuesday, October 07, 2014

Quantity : 100 sets - Price : $0.00

RFS Four-shaft Shredder is the heavy-duty crushing equipment specially designed to cope with the problem of slipping and off-contact for large barrel or cuboids shaped material. The innovative multi-rotor layout produces high torque level as well as a pulling force, which makes it...

Tuesday, September 30, 2014

Brief Introduction High capacity vibrating feeder , also known as vibrating feeding machine. The GZD series high capacity vibrating feeder is a new type and designed for transporting bulk materials before crushing and screening. Feeder for mining use double eccentric shaft vibrator...

Tuesday, September 30, 2014

Brief introduction of high frequency vibrating screen YZS high frequency vibrating screen is a kind of high efficient new screening equipment. Because of its trajectory approximate to round, it is called circle vibrating screen. Shunky's YZS high frequency vibrating screen is highly...

Tuesday, September 30, 2014

Product Description JCE european type jaw crusher produced by Shunky has already uncontrovertibly become one of the most popular equipment in the world. JCE european type jaw crusher which adopted international advanced technology is the first choice when crushing the hard and abrasion...

Monday, September 29, 2014

Engine Engine Type: 4-Stroke Single Cylinder Cooling: liquid&Oil /Fan Displacement: 600cc Fuel System: EFI Drivetrain Transmission/Final Drive: Automatic CVT H/L/N/R; Shaft Drive System: 2WD, 4WD, locked 4WD; shaft, Controled by buttons Suspension Front Suspension: Dual A-Arm 185...

Wednesday, September 03, 2014

Product Description Our company's GZD series vibrating feeder is a new type product and is designed to transport bulk materials before crushing and screening. Vibrating feeder adopts double eccentric shafts vibration exciter, which ensures that the equipment can withstand the large...

Tuesday, September 02, 2014

Product Description The whole sand-making production line consists of vibrating feeder, jaw crusher, VSI vertical shaft impact crusher, vibrating screen, sand-washing machine, belt conveyor, electric control system, etc. We design different production lines ranging 50 t/h to 500 t/h...

Sunday, August 10, 2014

Quantity : ≥1 - Price : 2200USD

Charcoal powder briquette making machine: We are Zhengzhou Yonghua Machinery Manufacturing Co.,Ltd. As one professional manufacturer in the charcoal powder briquette making machine, we can supply you the high quality of charcoal powder briquette making machines. Our briquette making...

Wednesday, August 06, 2014

Vertical Shaft Impact crusher (VSI Sand Making Machine) uses a unique rock on rock crushing method employing a high speed rotor with crushing chamber of the equipment. Velocity is applied in Vertical Shaft Impact crushers as the resulting force, to break stone particles. While applying...

Friday, July 18, 2014

Quantity : 1000pcs - Price : contact us

CRU42 Crossed Roller Bearings for medical equipment Product Model: CRU42 Brand Name: FRB; Material: GCr15SiMn;GCr15; Bore Size: 20 mm; Outside Diameter: 70 mm; H : 12 mm; Basic load rating(radial) C: 7.35 KN Basic load rating(radial) Co: 8.35 KN Weight: 0.29 KG Gear Options: No gear...

Friday, July 18, 2014

Quantity : 1000pcs - Price : contact us

JU065CP0 Thin-section sealed radial contact ball bearing for Machine tools Product Model: JU065CP0 Brand Name: FRB; Material: GCr15,GCr15SiMn; Bore Size: 165.1 mm; Outside Diameter: 184.15 mm; B : 12.7 mm; Weight: 0.395 KG Thin-section sealed radial contact ball bearing design...

Friday, July 18, 2014

Quantity : 1000pcs - Price : contact us

JU120CP0 Thin-section sealed radial contact ball bearing for Sorting equipment Product Model: JU120CP0 Brand Name: FRB; Material: GCr15,GCr15SiMn; Bore Size: 304.8 mm; Outside Diameter: 323.85 mm; B : 12.7 mm; Weight: 0.708 KG Thin-section sealed radial contact ball bearing...

Friday, July 18, 2014

Quantity : 1000pcs - Price : contact us

JU075CP0 Thin-section sealed radial contact ball bearing for Machine tools Product Model: JU075CP0 Brand Name: FRB; Material: GCr15,GCr15SiMn; Bore Size: 190.5 mm; Outside Diameter: 209.55 mm; B : 12.7 mm; Weight: 0.449 KG Thin-section sealed radial contact ball bearing design...

Thursday, July 17, 2014

Quantity : 50000PCS - Price : USD0.15/PC

Basic Informations: Business Type Manufacturer & Exporter Products arrow series: arrow,arrow nocks,arrow safts,arrow feather bamboo series: bamboo poles,tonkin bamboo fence,moso bamboo cans,bamboo fence,bamboo flower sticks,bamboo trellis and so on Brand oulay Number...

Thursday, July 17, 2014

Quantity : 10000 PCS - Price : negotiation

Specification: Length: 80cm(32 inch) ,84cm (33 inch) or 100cm (39 inch) Diameter: 7mm~9mm(most 7.5~8.5mm) Weight: 38g-42g Fletching: 100% real turkey feather can be dyed, one piece of arrow need three feathers normally Material: wood arrow shafts +metallic arrowheads (inside diameter...)

Thursday, July 17, 2014

Quantity : 8000pcs - Price : NEGOTIATION

Specification: Length: 80cm(32 inch) ,84cm (33 inch) or 100cm (39 inch) Diameter: 7mm~9mm(most 7.5~8.5mm) Weight: 38g-42g Fletching: 100% real turkey feather can be dyed, one piece of arrow need three feathers normally Material: wood arrow shafts +metallic arrowheads (inside diameter...)

Wednesday, July 09, 2014

Quantity : 30000 - Price : USD1-200

1.Use temperatures up to 2400°C 2. High density 3. High hardness 4. Low thermal conductivity 5. Chemical inertness 6. Resistance to molten metals 7. Good Wear resistance 8. High fracture toughness Location : NO.612 Xujiang Industrial Area Sunwu Road,Wuzhong District,Suzhou City...

Sunday, July 06, 2014

Quantity : 1000000pcs - Price : USD 0.6~1.5 / Piece

bamboo timpani mallets material: tonkin bamboo quality: the bamboo shaft is very very straight * the node is in the exact middle of the bamboo shaft * the node / joint size is very smooth and the hole in the middle of bamboo shaft is very few and small size diameter: length...