SINTERING - 244 ads

Friday, March 01, 2024

Quantity : 700 tons/y - Price : $4-10/kg

PTFE Molded Sheet PTFE is divided into molded plate and turning plate two categories. The molded plate is made of PTFE suspension resin by molding and sintering; Turning plate is the blank of PTFE suspension resin formed by molding or hydraulic method and then turning or rotary cutting...

Thursday, February 22, 2024

china tabular alumina powder for sale is a pure sintered α-alumina material. It is also known as white sintered alumina. Normally, the wholesale tabular alumina will be fully densified by rapid sintering at temperatures exceeding 1900°C without the use of sintering aids. Wholesale...

Wednesday, February 21, 2024

Fujistar ceramic abrasive containing selected materials has a better service life and grinding efficiency than traditional sandpaper, excellent dust removal and fast cutting performance, achieving higher production efficiency and fast break cycle time. Ceramic alumina sandpaper is...

Tuesday, February 20, 2024

As one of tungsten carbide scrap suppliers, we offer tungsten carbide scrap for sale at good wholesale prices. Tungsten carbide scrap materials can be roughly divided into the following three categories: (1) Waste products from tungsten processing: wire, coil, powder, sintered or...

Tuesday, February 20, 2024

A kind of filamentous tantalum material made from tantalum powder by rolling, drawing and other plastic processing methods. Specification of Tantalum Wire Application of Tantalum Wire Tantalum wire is the most used in the electronics industry and is mainly used for the anode lead...

Tuesday, February 20, 2024

Tantalum sheet metal is tantalum tungsten alloy plate, tantalum plate bright, no cracks, no peeling, no folding, no obvious oxidation, impurities pressed into defects. Contact us and get the tantalum plate price today! Specification of Tantalum Sheet Application of Tantalum Sheet...

Tuesday, February 20, 2024

Tantalum rod has two kinds of purity, 99.95% and 99.99%. The material is tantalum tungsten alloy rod, the brand is Ta1, Ta2. Specification of Tantalum Rod  Application of Tantalum Rod Mainly used in corrosion resistance and superconducting industries, can be used as tantalum capacitors...

Tuesday, February 20, 2024

Pure tungsten bar is made of 99.95% tungsten powder. Its physical properties are as follows: density 19.3g/cm3, melting point (liquid) 3422°C, conductivity 30% IACS Min, hardness 69HRA Min. The forging and annealing process results can be obtained by test. It possesses special properties...

Monday, February 05, 2024

Diamond Wire Drawing Die Blanks E-Grind is one of professional wire drawing dies suppliers , we provide two series of PCD wire drawing die blanks : CDB Series and TDBY Series. 5 grades of grain size available: 3 microns, 5 microns, 10 microns, 25 microns and 50 microns. What is...

Thursday, January 18, 2024

Price : 1-10usd

Aluminum nitride has high hardness, high thermal conductivity, good heat resistance, strong corrosion resistance and good mechanical properties. It can not only make various structural ceramics sintering additives or reinforcing agents, but also make aluminum nitride ceramic substrate...

Thursday, January 18, 2024

Molybdenum plate is a high-quality, durable, and lightweight material used in a variety of applications, including aerospace, manufacturing, and defense. It has a high melting point, high strength, and excellent resistance to corrosion and wear. Molybdenum plate is commonly used to make molds...

Thursday, January 04, 2024

Iron Ore Pellets for Sale Iron ore concentrate is produced from the magnetite iron ore in the beneficiation process. When the iron ore is mined, first it will be crushed by a crusher, after a preliminary screening, it is sent to the large gyrator crusher, and then the broken materials...

Wednesday, January 03, 2024

Polytetrafluoroethylene film is made of PTFE resin by molding, sintering, cooling into blank, then by turning, calendering. The ptfe thin film made by turning is a non-oriented film, which becomes a oriented film after calendering. The non-oriented film is semi-oriented film by calendering 1...

Wednesday, January 03, 2024

Extruded PTFE tube is frequently employed when a uniform wall thickness is required throughout the entire length of the tube. The polytetrafluoroethylene pipe produced by extrusion process solves the problem of poor shrinkage of PTFE pipe under heat, which can not effectively improve...

Saturday, December 02, 2023

Quantity : 8000kgs - Price : USD0.025 - USD1.05

Diamond Wire Drawing Die Blanks E-Grind is one of professional PCD wire drawing dies suppliers and diamond dies manufacturers, we provide two series of PCD wire drawing die blanks: CDB Series and TDBY Series. 5 grades of grain size available: 3 microns, 5 microns, 10 microns, 25...

Saturday, December 02, 2023

Quantity : 8000kgs - Price : USD0.025 - USD1.05

Polycrystalline Diamond Compact Cutters E-Grind produces high-quality Polycrystalline diamond composite(PDC) and polycrystalline diamond compact cutters. Polycrystalline diamond composite(PDC) sheet is made of diamond particles and cemented carbide matrix sintered at 60,000 atmospheres...

Thursday, November 30, 2023

Artificial PDC cutter is composed of a layer of polycrystalline diamond cutters and carbide matrix, so it not only has the high hardness, high wear resistance and thermal conductivity of diamond, but also has the high strength and high impact resistance of carbide. Using a variety...

Thursday, November 30, 2023

PDC bit is the abbreviation of Polycrystalline Diamond Compact Bit, also known as Polycrystalline Diamond Cutting Block Bit or Composite Chip Tooth Bit. The bit body of the matrix body pdc bits is sintered by the same method and process as the sintered natural diamond bits and TSP...

Thursday, November 30, 2023

PDC bit for sale are polycrystalline diamond compact bits. PDC bit are widely used in oil drilling because of their fast drilling speed, long life and high feed rate, and are composed of drill body, PDC cutting teeth and nozzle. Steel body oem pdc bit material is made of medium carbon...

Tuesday, November 28, 2023

The lightning thunder resistor for home is the core part of the lightning arrester. It uses zinc oxide as the main component, adding a small amount of bismuth oxide, cobalt oxide, chromium oxide, manganese carbonate, antimony oxide and other trace additives, and is sintered at high temperature...

Wednesday, November 01, 2023

Samarium cobalt magnets china are a type of rare earth magnet, along with neodymium magnets. They are made from a combination of samarium, cobalt, and small amounts of other rare earth elements. Sm2co17 magnet are known for their high magnetic strength, excellent temperature stability...

Thursday, October 26, 2023

The surface texture treatment requirements of special industries are extremely stringent, such as parts and products in extreme climatic environment having a level of product surface cleanliness, types of primers, topcoats, and protective coatings. Richconn, as a professional surface...

Thursday, October 26, 2023

For more than 15 years, Packson Mold has become an excellent manufacturer that is enabled to make parts with high tonnage and large size thanks to our one-stop facility. We are keen to meet your injection molding needs with single and convenient sources. Thanks to our advanced equipment...

Friday, October 13, 2023

Quantity : 200 tons - Price : 25usd-100usd

Tungsten tube, namely pure tungsten tube, is one of the main pure tungsten products. The purity of tungsten tube produced from medium tungsten can reach more than 99.95%. Because the production process is different, the density will be different. The density can reach 18.2g/cm3 if...

Tuesday, October 10, 2023

Quantity : 700 tons/y - Price : $4-10/kg

PTFE Slide Bearing Plates The product is made of PTFE suspended fine powder resin, cold pressed into billet, sintering forming, pressing grease groove, machined into various specifications of sliding block. Has very high compressive strength, low friction coefficient, excellent...

Tuesday, October 10, 2023

Quantity : 700 tons/y - Price : $4-10/kg

Glass Filled PTFE Gaskets PTFE filled products by PTFE resin filler, after mixing, pressing and sintering after secondary processing. This product not only maintains the original characteristics of pure PTFE plastic, but also improves the hardness, creep resistance, abrasion resistance...

Tuesday, October 10, 2023

Quantity : 700 tons/y - Price : $4-10/kg

PTFE Extruded Tube Polytetrafluoroethylene extrusion tube process. mixing: through the mixing machine to polytetrafluoroethylene powder and extruder mix. storage: storage at 25℃ for 24 hours. extrusion molding: extrusion molding through the extruder. sintering: the product into the...

Tuesday, October 10, 2023

Quantity : 700 tons/y - Price : $4-10/kg

Self Adhesive PTFE Sheet PTFE surface itself is not adhesive, such as want to bond and other substances must need one side and two sides after Nana chemical treatment, and rubber, metal, and other substances bond, in special use, make up for the non-adhesive performance of polytetrafluoroethyle...

Tuesday, October 10, 2023

Quantity : 700 tons/y - Price : $4-10/kg

PTFE Molded Sheet PTFE is divided into molded plate and turning plate two categories. The molded plate is made of PTFE suspension resin by molding and sintering; Turning plate is the blank of PTFE suspension resin formed by molding or hydraulic method and then turning or rotary cutting...

Wednesday, September 27, 2023

Price : 200,000 USD~1,500,00

Eplus3D Polymer 3D SLS Aluminium Printing Machines and Materials For Your Needs Eplus3D SLS polymer 3D printers are flexible machines for industrial grade production and research. We also provide advanced processes for industrial SLS 3D printing with the most various polymer materials optional...