DESCRIPTION - 13710 ads

Saturday, August 29, 2020

Price : <$200

Description The sliding rail fiber optic patch panel is made of metal in 19" standard structure. There are 2pcs of stainless steel rails at the sides of the box. The fiber box can be loaded with FC,SC,ST,LC adapters and pigtails. The fiber patch panel is where the end of the optical...

Saturday, August 29, 2020

Price : <$200

Description 10 / 100Mbps single-mode single-fiber media converter is an Ethernet optoelectronic signal conversion device between 10 / 100M UTP interface (TX) and 100M fiber interface (FX). The traditional 10 / 100M media converter can be extended to 120 kilometers via a single fiber link...

Saturday, August 29, 2020

Price : <$200

Description: UnitekFiber produces rack chassis optical PLC spltter 1 32. The structure of rack chassis PLC splitter is to instal one or two micro type 1*N or 2*N PLC splitter into a rack mounted box. The box is in 19 inch chassis standard. The Rack mounted PLC splitter is mainly...

Saturday, August 29, 2020

Price : <$200

Description UnitekFiber is manufacturing 2U fiber optical distribution frame . Our ODF frame can be loaded with FC,SC,ST,LC adapters and pigtails. The optical distribution frame is widely used in city telephone, rural telephone network systems, data and image transmission systems...

Saturday, August 29, 2020

Price : <$200

Description UnitekFiber is manufacturing 2U fiber optic Fixed ODF frame. Our ODF frame can be loaded with FC,SC,ST,LC adapters and pigtails. The optical fiber ODF frame is widely used in city telephone, rural telephone network systems, data and image transmission systems, and CATV...

Saturday, August 29, 2020

Price : <$200

Description Dual-fiber CWDM Mux Demux is a passive device used to multiplex and demultiplex wavelengths to expand network capacity. This component must work in pairs to transmit bi-fiber in both directions. It supports up to 18 channels for sending and receiving 18 signals with wavelengths...

Friday, August 28, 2020

Quantity : 1 unit - Price : 20000 USD

Extendable flatbed trailer is commonly used to transport very long cargo, like tanks and windmill blades and bridge sections among other similar-like cargo. To take these loads, the trailer is extended lengthwise. When it is not carrying any load, it needs to be adjusted back to a short length...

Thursday, August 27, 2020

Price : 2.4-2.9$/kg

Description of CMC Toothpaste Grade The requirements of daily necessities are increasing constantly, with the improvement of people's living standards. As a kind of daily necessity, the value of Toothpaste is not limited to mouth cleaning and gradually becomes more functional and healthy...

Thursday, August 27, 2020

Price : 2.4-2.9$/kg

Description of Paper-Making Grade CMC Sodium CMC paper grade has excellent adhesion, thickening, flocculation, film, colloids protection, retain moisture, chemical stability and excellent performance of pulp fiber affinity. Sodium carboxymethyl cellulose applying in coating size can...

Thursday, August 27, 2020

Price : 2.4-2.9$/kg

Description of CMC Oil Drilling Grade CMC & PAC CMC & PAC can be used as fluid loss reducer or viscosifier in drilling fluids. The function of CMC is to reduce the fluid loss as much as possible through forming low permeability, flexible, thin and compact filtration cake on borehole wall...

Thursday, August 27, 2020

Price : 2.4-2.9$/kg

Description of Food Grade CMC Sodium carboxymethyl cellulose (CMC/cellulose gum) is a kind of cellulose ether, can easily soluble in cold and hot water, with maximum yield, most widely and conveniently used among all cellulose products. The main raw material of CMC is refined cotton...

Thursday, August 27, 2020

Price : 2.4-2.9$/kg

Description of Ceramic Grade CMC CMC can be used in the ceramic body as a reinforcer, excipient, and plasticizer. It can facilitate body shaping, CMC can also be used in glazing pulp and fancy glaze plays a role of thickening, binding, and dispersion. It can raise surface tension...

Thursday, August 27, 2020

Quantity : 1000PCS - Price : 0.1- 6

Description of Consumer Parts Plastic Mold: Plastic Valve 3 Plate Mould Tolerance: +-0.01mm Surface: SPI A2 & VDI 3400 Part material: PPO food grade Shrinkage: 0.6% Cavity steel: ASSAB 8407 HanKing Mold Tolerances Plates and Mold Base Components: ± 0.013 mm (± 0.0005 in) Cavity components...

Thursday, August 27, 2020

Quantity : 1000PCS - Price : 0.1- 6

Mould Name: Adapter Charger Housing Mould Part Material: PC Product Size: 58.3*57.9*8.6mm Product Description: Adapter Charger Housing UK Mould Cavity: 4 Cavities Mould Size: 400*450*343MM Suitable Injection Machine: 160 ton Mould Cavity Steel: ASSAB8407 Mould Injection System: Cold...

Thursday, August 27, 2020

Quantity : 1000PCS - Price : 0.1- 6

Professional Automotive Injection Mold for Cartridge Fuses TolerancesPlates and Mold Base Components: ± 0.013 mm (± 0.0005 in)Cavity components: ± 0.005 mm (± 0.0002 in)CAD/CAM SoftwareAutoCAD 2007UG NX8.5 CADUG NX8.5 CAMPro-E Wildfire Version... More Vehicle Switch Mold Tooling...

Thursday, August 27, 2020

Quantity : 1000PCS - Price : 0.1- 6

Brief Introduction of Hanking ABS molds Mould Name: Plastic Injection ABS Molds Part Material: ABS Product Size: 172*123 mm Product Description: clear window Mould Cavity: 1 Cavity Mould Size: 300*380*250 mm Mould Cavity Steel: ASSAB 8407 Mould Injection System: hot runner Mould Ejection System...

Thursday, August 27, 2020

Quantity : 1000PCS - Price : 0.1- 6

Mould Name: 3 Plate Insert Mould Part Material: PBT GF15 Product Size: ф34.9x82.29 Product Description: Mischschraube kpl Mould Cavity: 2 Cavities Mould Size: 250*230*350 MM Mould Cavity Steel: 2343 ESR Mould Injection System: 3-Plate point gate Mould Ejection System: Round ejector...

Thursday, August 27, 2020

Quantity : 1000PCS - Price : 0.1- 6

Unscrewing Mould Mould Name： Unscrew Cap MouldPart Material：PP+TPEProduct Size： Product Description: Mould Cavity: Mould Size: 750*810*700mmSuitable Injection Machine: Mould Cavity Steel: Mould Injection System: Mold Master Hot... More Two Shot Mould Two Shot Mould Mould Name： Double...

Tuesday, August 25, 2020

Product Introduction: TG hydraulic cylinder is a single-acting multi-section telescopic sleeve lift cylinder. It has the advantages of small size and long stroke, and is mainly used in the hydraulic system of engineering and mining dump trucks. Product Description Product Advantage...

Tuesday, August 25, 2020

Brief introduction: Sanitation vehicle cylinders are widely used in various types of compressed sanitation garbage truck hydraulic systems. The series of cylinders include push plate cylinders, sliding cylinders, scraper cylinders, lift cylinders, and the like. The push plate cylinder...

Tuesday, August 25, 2020

Price : 3,00 €

Brief Introduction: HSG type engineering hydraulic cylinder is a double-acting single-rod piston type hydraulic cylinder. It has the characteristics of simple structure, reliable operation, convenient assembly and disassembly, easy maintenance, buffering device and various connection methods...

Tuesday, August 25, 2020

Price : 3,00 €

Product: forged trunnion Application: hydraulic cylinder, truck Place of origin: Hebei, China (Mainland) Material: C45, 20, ASTM A216 70-36 grade WCB Process: die mold forged, forging + CNC machining, Surface treatment: anti-rust oil or painting Surface roughness: 12.5Ra Weight: 0...

Tuesday, August 25, 2020

Price : 3,00 €

Product: forged hydraulic cylinder head Application: hydraulic cylinder Place of origin: Hebei, China (Mainland) Material: C45, 20, ASTM A216 70-36 grade WCB Process: die mold forged, forging + CNC machining, Surface treatment: anti-rust oil or painting Surface roughness: 12.5Ra Weight: 0...

Tuesday, August 25, 2020

CIMC 38t tractor tipper trailer description CIMC Rear dump semi trailer adopt high strength steel to make it durable when load the sand or small stones or rocks. And the loading capacity are 40t, 60t, 80t. Semi Tippers trailer equipped with reliable hydraulic HYVA cylinder. CIMC can...

Saturday, August 22, 2020

Product Description Automatic wet processing technology cassava flour production line </ span>< /span> 1. About Cassava Flour Cassava flour is produced from fresh cassava tubers. It's white color and can be used in food products. With high starch content, it's very popular...

Friday, August 21, 2020

Price : 3,00 €

PET cosmetic bottles are widely used for toiletries and body mist products in our modern beauty & salon industry. Products Description PET was born in the textile industry. However, it was widely used in the packaging industry after it is used to pack carbonated beverages in 1970...

Friday, August 21, 2020

Price : 3,00 €

Mist spray is a new type of pump developed to meet the needs of the use of parmacy products and perfume products. Products Description This kind of pump can change the direction of the spray by blocking, and whose nozzle can be designed to change the effect of spray to meet different needs...

Friday, August 21, 2020

Price : 3,00 €

As the lotion pump manufacturer, the lotion pump was invented by human being to change the old lifestyle for convenience. It is simple, convenient, energy-saving and environmentally friendly, which greatly improves the comfort of life. Products Description The main features of option...

Friday, August 21, 2020

Price : 3,00 €

The production process of a glass jar/bottle refers to a series of action combinations (including mechanical, electronically controlled, etc.) that are repeated in a given programming sequence with the goal of producing a jar/bottle of the desired shape. Products Description At present...

Friday, August 21, 2020

Price : 3,00 €

Prior to the invention of the foam pump, the foam was usually ejected from the product in the form of an aerosol, i.e., the liquefied gas was used to swell the effluent to form a foam, or the post-foaming agent was used to cause the squirted colloid to form a foam. Products Description...