MAXIMUM - 6820 ads

Friday, October 27, 2017

Building material decomposition smoke density testing machine for the stability of the material smoke smoke toxic hazard classification, does not apply to non-stable smoke smoke toxic hazard classification. Standards compliant: GB / T20285-2006 "Hazardous Classification of Tobacco...

Friday, October 27, 2017

Rubber wheel abrasive wear tester-According to ASTM G65-04 standard, under certain test conditions, the use of sliding friction in the form of engineering plastics, powder metallurgy, alloy bearings and other performance. main feature: 1. consists of two parts: host and control system; 2...

Friday, October 27, 2017

Intelligent fiber heat shrinkable tester used to measure a variety of chemical fibers and natural fibers in the dry heat, high temperature steam, boiling water treatment after the heat shrinkage Meet the standard: GB / T6505-1986; FZ / T-T50004-1991 Instrument features: The instrument...

Thursday, October 26, 2017

Quantity : 10000 - Price : USD10.00

E1 type spherical roller bearings have improved kinematics and optimised surfaces, are made from higher performance materials and do not have a rigid central rib. Without a cage suffix have sheet steel cages. The two cage halves are retained by a guidance ring in the outer or inner ring...

Thursday, October 26, 2017

Quantity : 10000 - Price : USD10.00

E1 type spherical roller bearings have improved kinematics and optimised surfaces, are made from higher performance materials and do not have a rigid central rib. Without a cage suffix have sheet steel cages. The two cage halves are retained by a guidance ring in the outer or inner ring...

Tuesday, October 24, 2017

Quantity : 9999999999 - Price : Negotiable

YM-CKG160 CNC high-speed vertical turning lathe 1. This system machine tool applies to cutting such tools as cemented carbide and ceramics to make rough, semi-fine processing and fine processing for internal and external cylindrical surface, conical surface, end face, cutting groove...

Tuesday, October 24, 2017

Quantity : 9999999999 - Price : Negotiable

YM-CKG125 CNC High speed Vertical Turning lathe 1. This system machine tool applies to cutting such tools as cemented carbide and ceramics to make rough, semi-fine processing and fine processing for internal and external cylindrical surface, conical surface, end face, cutting groove...

Tuesday, October 24, 2017

Quantity : 9999999999 - Price : Negotiable

CJ5250 Double-column Vertical Lathe 1. Such series of lathe are featured with high bearing capacity, reasonable price and excellent performance. 2. Large base, working platform, ring hear and guide plate pf working platform. 3. The working platform adopts the type of purely static...

Tuesday, October 24, 2017

CJ5240 Double-column Vertical Lathes in china 1. Such series of lathe are featured with high bearing capacity, reasonable price and excellent performance. 2. Large base, working platform, ring hear and guide plate pf working platform. 3. The working platform adopts the type of purely...

Saturday, October 21, 2017

Quantity : 500tons - Price : USD0.015-----USD100

Mono pole magnets(also called as single pole magnets) are the magnets that only one surface have magnetism, the other surface just has very weak magnetism. We all know there are at least two poles for one magnet. Then how the mono-pole magnets be made? The method is coating one surface...

Saturday, October 21, 2017

Quantity : 500tons - Price : USD0.015-----USD100

Product Description Neodymium-iron-boron magnets short as NdFeB magnets, NIB magnets, neo magnets or neodymium magnets. Following called as NdFeB magnets or neodymium magnets.As a kind of rare earth magnets, neodymium magnets were developed from the year of 1983 , it is the most powerful...

Saturday, October 21, 2017

Quantity : 500tons - Price : USD0.015-----USD100

Type-A: countersu nk pot magnets, countersu nk magnetic pots, countersunk cup magnets, countersunk holding magnet, countersunk Neodymium pot magnets, countersunk NdFeB Pot Magnets, cup magnets with countersunk holeMany types of permanent magnetic pots /pot magnets available on the...

Saturday, October 21, 2017

Quantity : 500tons - Price : USD0.015-----USD100

As one kind of magnetic tools, magnetic pick-up tools are used to pick up small metal parts, screw caps, nails and gasket etc. They called as pick-up magnets. There are many types available on the market of magnetic pick-up tools. Pen type magnetic pick-up tools are the most commonly used type...

Wednesday, October 18, 2017

Specifications. Pressure Rating: 1.6- 4.0Mpa Specification: Screwed: DN15-50, Flanged: DN15-50 Material: cast steel Standard flanges: DIN, ANSI, JIS; Standard screwed: NPT BSP Performance / Advantages: Adopt imported material as its hot sensitive element, and so it is high sensitivity...

Wednesday, October 18, 2017

Brief Introduction. Advantages. 1.Continues discharging saturation condensed water without accumulation, and so get the maximum thermal efficiency. 2.When steam pressure changes, the ball float can adjust the opening of valve seat without influence, and so it is stable. 3.With automatic...

Wednesday, October 18, 2017

Brief Introduction. This pressure reducing valve is robust direct acting bellows pressure reducing valve designed for use on steam,air and inert industrial type gases.The valve is available in four nominal sizes: DN25,DN32 ,DN40 and DN50. Set the outlet pressure through adjusting spring...

Tuesday, October 17, 2017

Fabric anti-electromagnetic radiation performance tester is mainly used for textile, plastic sheet, sheet metal, non-conductive material surface coating or coating, metal mesh, conductive film, conductive glass, conductive medium plate electromagnetic shielding materials such as...

Tuesday, October 17, 2017

Brief Introduction: The test machine complies with UL817 and other relevant standards "special rubber fixed to the machine friction rub hammer surface to a certain load and frequency requirements for safe use of the provisions" applicable to manufacturers and quality control departments...

Tuesday, October 17, 2017

Brief Introduction: Digital Elmendorf Tearing Tester is used for determining the tear strength of fabrics, non-woven, paper, cardboard, film, woven materials, polymer film, etc. Core advantages: The Digital Elmendorf Tearing Tester is using Elmendorf method to determine the tear...

Tuesday, October 17, 2017

The Moisture Management Tester is the only instrument on the market that can precisely measure the liquid management properties of performance and technical fabrics, ensuring the comfort and protection that consumers demand. Standards: AATCC 195，SN 1689.1，GB/T 21655.2 Applications...

Friday, October 13, 2017

Quantity : 10000pcs

BCD22 10 Turns Counting dial(alternative of BI Technologies Part no.2696) - Number of Turns: 0-10Turns Dial Divisions: 50 per turn Locking Mechanism: Positive Action Weight: About 16 G Set Screw: One included Hex Key: One included - Shaft Diameter: 6.35mm/6mm/4mm Shaft Extension...

Tuesday, October 10, 2017

Application: Thermal Radiation Droplet Tester, to determine the resistance to the thermal radiation through up a radiant heat source placed on the top of the sample to generate gas combustion, droplet, fiber combustion, etc. thus the fire safety of automotive interior materials is determined...

Tuesday, October 10, 2017

Fabric strength machine Application Fabric strength machine, universal strength machine and Material strength machine mainly used in a variety of materials with its constant speed stretching; tearing, stripping, fixed load, fixed elongation, elastic recovery rate, the top break and...

Tuesday, October 10, 2017

Digital bursting strength tester Standards： GB/T7742, FZ/T60019, ISO 13938.2, NEXT TEST METHOD 22 2006 ,WOOLMARK TM29 2000,EDANA 80.3-99,ISO 2758,ASTMD 3786,JISL108 Scope of application: Digital bursting strength tester is used for the detection of woven, knitted, non-woven fabrics...

Monday, October 02, 2017

Quantity : 500 - Price : 2,00 €

Nous recherchons fournisseurs ou destockeur ect... . notre recherche en ce moment est sur la lessive liquide , à s'avoir DASH / PERSIL / ARIEL bidons liquide de 30doses +- Nous prenons en charge le transport sur place ( pas de livraison) , un premier coup de 500 piéces ou 1000 pîéces...

Thursday, September 28, 2017

Double polyester Fiber Braid Reinforced Silicone Food Hose Construction: Type PDF is manufactured from High purity platinum cured Silicone with double polyester fiber reinforcement. Temp. Range: -60°C and 200°C. Colour: White (Coloured covers available) Applications: For transporting...

Thursday, September 28, 2017

Glass Fiber Braid Reinforced Silicone Hose • Construction: Type GF is manufactured from High purity platinum cured Silicone with glass fiber reinforcement. • Temp. Range: -60℃ and 260℃. • Color: Translucent (Colored covers available) • Applications: For transporting high temperature...

Thursday, September 28, 2017

Silicone tube generally includes pump tubing, single-layer braided silicone tube, multi-layer braided reinforced silicone hose. For transporting liquids at low pressure where a closed bending radius is not required. Polyester yarn weave in hose wall enhances hose compressive capacity...

Saturday, September 23, 2017

Fabric anti-electromagnetic radiation performance tester is mainly used for textile, plastic sheet, sheet metal, non-conductive material surface coating or coating, metal mesh, conductive film, conductive glass, conductive medium plate electromagnetic shielding materials such as...

Saturday, September 23, 2017

Brief Introduction: The test machine complies with UL817 and other relevant standards "special rubber fixed to the machine friction rub hammer surface to a certain load and frequency requirements for safe use of the provisions" applicable to manufacturers and quality control departments...