SYSTEM MCS48 - 31068 ads

Friday, November 10, 2023

The Boom Pump is manufacutred by Elephant fluid Power Co., Ltd, a famous made in China brand. A2FO23 model can be used to replace original Rexroth A2FO23 model. We have equivalent quality as the original one, more competitive price, delivery fast, and best after-sales services. ELEPHANT...

Friday, November 10, 2023

Elephant Fluid Power provides hydraulic piston pump bearings, original bearings, the price is reasonable, and will be shipped within 5 days. Detail of Rexroth A11V0190 Piston Pump Spare Parts Bearing F-205526, F-207813 The valve plate has two forms: plane flow distribution and spherical...

Friday, November 10, 2023

The hydraulic pump and hydraulic motor is manufacutred by Elephant fluid Power Co., Ltd, a famous made in China brand. PV23, MF23 model can be used to replace original Sauer Danfoss PV23, MF23 model. We have equivalent quality as the original one, more competitive price, delivery fast...

Friday, November 10, 2023

Application areas: industrial applications, occasions requiring pressure control. Details of PV092R1K1T1NMMC Product introduction: Heavy-duty axial piston motor pump, rigid shell and swash plate, used for high reliability open hydraulic equipment; Axial pump piston hydraulic with...

Friday, November 10, 2023

The pump seal kit produced by Elephant Fluid Power has a wide variety and complete models, where you can achieve a one-stop shopping experience. Our product quality and testing standards meet the requirements of Rexroth, Danfoss, Komatsu, Caterpillar, etc., compatible with these brands...

Friday, November 10, 2023

Used for cannulation of the ductal system and for sphincterotomy, if preloaded, also aids ERCP operation in the stenosis of bile duct difficult stricture. Features of Sphincterotome - RX series Tapered tip enables easy cannulation. Insulating coating minimizes the risk of tissue damage...

Friday, November 10, 2023

Used for endoscopic retrograde biliary drainage. Features of Single-use Biliary Draining Tubing Whole drainage tube has clear contrast image under X-ray during the procedure. Multiple markers on delivery system provide enough radiopacity for accurate placement. The wings of the nasal...

Friday, November 10, 2023

PVC is a non-crystalline polymer of polyvinyl chloride. Its glass transition temperature is 105℃-75℃ depending on the molecular weight. It has flame retardancy, high rigidity, excellent chemical resistance, and electrical insulation, but it is a heat-sensitive resin. Its processing...

Friday, November 10, 2023

Price : USD0.3-USD5

BR tuya smart bulb, RED, BLUE, GREEN, WHITE adjustable, bulged reflector light bulb. As a professional TUYA china led lighting bulb manufacturer, we provide high quality TUYA bulged reflector bulb. The user can increase the atmosphere of the application scene by controlling the tuya...

Friday, November 10, 2023

WALKSON provides high-quality precision cast components & forging components. Material includes carbon steel, low alloy steel, high chrome white iron, high manganese steel, Stainless steel, Superalloy, Ti-Alloy, Metal ceramic composite material, and bimetal composite. Industries...

Friday, November 10, 2023

At present, our machining shop, providing production cnc machining, as well as cnc machining and manufacturing services, has more than 50 kinds of processing equipment, including more than 8 high-precision equipment such as machining center, 1 imported horizontal machining center...

Friday, November 10, 2023

The main function of the EDFA optical amplification subsystem launched by Guangzhou Sintai Co., Ltd is to compensate the signal's optical power in the transmission link, which can finally extend the optical signal transmission distance. It can be divided into BA, LA, and PA based...

Friday, November 10, 2023

The integrated DWDM/CWDM platform of OTNS8600 Ⅰ type optical transmission network system is mainly used in the metro area access layer network, and it can complete the function such as optical fiber saving, service multiplexing, and distance extension, solve the shortage of fiber...

Friday, November 10, 2023

The DWDM multiplexer/demultiplexer launched by Guangzhou Sintai Communication Co., Ltd. is designed for multi-wavelength demux application. It works on an ITU grid with 100 GHz channel spacing based on thin-film filter (TFF) technology. The wavelength range of DWDM is from 1525nm...

Friday, November 10, 2023

The CWDM multiplexer/demultiplexer launched by Guangzhou Sintai Communications Co., Ltd. is designed for economical and efficient multi-wavelength CWDM network applications. It is based on thin-film filter (TFF) technology and operates on ITU grids with 20nm channel spacing. The CWDM...

Friday, November 10, 2023

CWDM technology provides the flexibility to increase capacity of existing fiber infrastructure by enabling multiple channels/wavelengths over the same fiber cabling. Each channel carries data independently from each other, allowing network designers to transport different data rates...

Friday, November 10, 2023

10G OTU service card launched by Sintai Communication Co., Ltd. supports four types of service access with 42M~11.3G rates. Its main function is to finish the 3R regeneration of any 5-channel signals under any protocol within the rate of 1.25 Gbit/s~11.3 Gbit/s to be accessed, and...

Friday, November 10, 2023

DRIP IRRIGATION DRIPPER In the drip irrigation system, the device that changes the pressure water flow in the capillary into a drip or fine flow through the flow channel or orifice is called irrigation drippers or irrigation emitters. Most drippers are made of plastic. The commonly...

Friday, November 10, 2023

DRIP IRRIGATION ADAPTER OR CONNECTOR We produce these drip irrigation tubing connector: single adapter for soft pipe, double straight adapters for soft pipe, double adapters for three branches, four adapters for five branch and four adapters for six branch . Drip Irrigation Pipe/Tape/Line...

Friday, November 10, 2023

CENTRIFUGAL FILTER Centrifugal filtration equipment separates particles of different densities by gravity & centrifugal force principles. The centrifugal filter has outstanding performance for large particles filtration. The centrifugal filter is made of PP material to resistant corrosion...

Friday, November 10, 2023

BEND ARROW DRIPPER Seapeak is specialied in manufacturing bend arrow dripper. For more information china irrigation dripper and drip irrigation system, please feel free to contact us Location : 313 Heji Guangchang No. 666 Ganjiang Road Suzhou City Jiangsu China, 215002 suzhou, Contact ...

Friday, November 10, 2023

ARROW DRIPPER china arrow dripper is a kind of dripper commonly used in drip irrigation, which is also called stake dripper. There are usually two kinds of arrow drippers, including curved arrows and straight arrows. The length of the drip arrow part is about 10cm which is used to...

Friday, November 10, 2023

IRRIGATION SYSTEM MANUFACTURER FROM CHINA In the past, if you wanted to grow more, you needed more fertilizer, labor and land. As a professinal irrigation system company, Seapeak supplies types of watering irrigation systems which are to precisely reverse this age-old relationship...

Thursday, November 09, 2023

Quantity : 1200sets/y - Price : USD10000-200000

KD-DC430A(B, C) CNC EDM Drillig Machine Features - The system adopts a touch screen industrial control computer and Win7 operating system. It runs fast and can process massive data at the same time. - With a rich data interface, the system can directly import data and edit it through...

Thursday, November 09, 2023

Quantity : 1200sets/y - Price : USD10000-200000

CNC wire cut EDM machine KD400GL has Kingred's own designed mechanical structure and lasted developed PLC-controlled system running at the latest Windows platform. Heavy-duty “C” structure and “T” shape machine bed with good rigidity to make sure accuracy of cutting, long-term accuracy...

Thursday, November 09, 2023

Quantity : 1200sets/y - Price : USD10000-200000

KD series high precision wire edm is featured with “C” structure, “T” shape machine bed, 4 axis/6 axis AC servo motor control, and 5 axis PLC control system on latest Windows platform. With technology of multiple cuts to get good performance of surface finish and precision. High Precision...

Thursday, November 09, 2023

Quantity : 1200sets/y - Price : USD10000-200000

DK77 series high speed wire cut EDM has non-resistors HF power with Max cutting speed higher than 300mm2/min, Max cutting thickness is higher than 1000 mm. High accuracy linear guide way, ball screw and strong machine body with good rigidity to make sure good performance of cutting accuracy...

Thursday, November 09, 2023

Quantity : 1200sets/y - Price : USD10000-200000

P40 CNC EDM machine has three axis simultaneous control and 4th generation electrical discharging control system, best surface finish Ra≤0.12μm, Min. electrode wear ≤0.05%, standard equipped with 50A controller and Max machining efficiency ≥500mm3/min. Good performance, favorable...

Thursday, November 09, 2023

Quantity : 1 - Price : 1,00 €

Application The measurement of the open and lock forces of bottle caps holds significant importance as both online and offline technical parameters in production. These forces can have a direct impact on the ease of product transportation and consumer usage. Due to its exceptional...

Thursday, November 09, 2023

Quantity : 1 - Price : 1,00 €

Background A critical property of flexible barrier materials is their ability to withstand repetitive strain, known as flex durability or Gelboflex resistance. Strong flex crack resistance is essential as it lowers the risk of package perforation during distribution, safeguarding...