ACCURACY - 5461 ads

Monday, October 10, 2016

Quantity : More Than - Price : USD1-400/Set

Compact Handheld RFID Data Collector POS Terminal Compact Handheld RFID Data Collector POS Terminal Introuction The HT5000 product is an industry-level handheld terminal developed, designed, and produced based on features od different industries. The series adopt ergonotic design...

Thursday, September 29, 2016

Quantity : 1000sets/m

PG338 Digital Torsion Meter Characteristics: 1) It can measure the clockwise and anti-clockwise torque of lamp cap. And it can preset upper limit alarm. Auto save data after system shutting down. 2) Instrument has the function of zero point calibration. The zero point is very steady...

Thursday, September 29, 2016

Quantity : 1000sets/y

Salt Spray Test Chamber Salt spray test chamber is applied to measure the reliability of the EUT against salt-spray corrosion. Salt spray chamber is to simulate the climate near the sea, there are two kinds of test according to different standards (JIS, ASTM, CNS, GB), neutral salt...

Thursday, September 29, 2016

Quantity : 1000sets/y

Simulation Transport Vibration Testing Machine (PG-120) Simulation transport vibration testing machine is applied to test the anti viberation ability in transit, and it is widely used in the industries of electronics, motor, lighting fixture, package, toy and etc. This equipment...

Thursday, September 29, 2016

Quantity : 1000sets/y

AC/DC Digital Power Meter (Interface model) Introduction 104 digital power meter can display the AC/DC voltage, current, power factor, frequency and power. Introduction 1. Voltage: 600V/75V/35V (DC), 600V/75V/35V(AC) 2. Current: 20A/2A/0.5A (DC), 20A/2A/0.5A (AC) 3. Power factor: -1...

Thursday, September 29, 2016

Quantity : 100sets/ye

Spring Hammer Calibration Device Introduction: Spring hammer calibration device is specially for lab to calibrate the spring hammer, it is designed according to IEC60065-2-75-1997, it is mainly apply to third part lab, the National immigration department and appliance-related research...

Monday, September 26, 2016

Quantity : 1 set - Price : USD980.00/set

stainless steel powder sieving machine Feature 1. High screening accuracy, high efficiency, suitable for any type of powder and viscous liquid filter. 2. Fully sealed, no dust flying, the liquid does not leak, the mesh is not blocked, screening to 500, up to 5 micron filter. 3....

Thursday, September 22, 2016

Quantity : 1 unit

Heat-shrinkable Tubing Cutting Machine/ Electrical Copper Lead Wire Cutting Machine Features: 1. Fit for cutting sheet copper, steel sheet, aluminium sheet, hot-shrunk tube, PVC tube, electrode, plastic sheet, flat ribbon cable etc. 2. Step motor control, high accuracy. 3. Cutting...

Thursday, September 22, 2016

Quantity : 1 unit

Full Automatic Terminal Crimping Machine Wire Twisting Function(Single Head) Feature: 1.6100pcs/hour.full-automatically cut wire,one end terminal stripping/peeling,two ends of terminal 2.High definition LED screen display,language of HMI can be customized as customer's need, 3...

Thursday, September 22, 2016

Quantity : 1 unit

RJ 45 Connector Cable Terminal Crimping Machine, Terminal Insertion Machine Feature: 1.The cable crimping machine is specially design for producing internet and phone wire . 2. Various crimping die for your option. 3. Special pressure British or American telephone plugs.Die replacing simple...

Thursday, September 22, 2016

Quantity : 1 - Price : $800

- Wire pipe cutting machine HL-100B,fast feeding speed,accuracy of 0.1mm in microcomputer control - FOB Reference Price：Get Latest Price 1 Unit/Units (Min. Order) Supply Ability: 100 Unit/Units per Month Port: Shenzhen Contact Supplier Chat Now! Add to My Cart Seller Support...

Saturday, September 10, 2016

Porduct: The 3 jaw chuck is using to hold the workpiece while welding. Characteristics: D-series chuck are famous of the high accuracy,light weight structure.convenience and comfort in operation,great carrying capacity,so it will not be deformed and occur mergence of crash. D-series...

Saturday, September 10, 2016

Product Application This type portable cutting machine are all adopt flame/plasme cutting model,and it has three type (NHC-1225 / NHC-1525 / NHC-1530),and the cutting qulianty is wonderful. Main features 1）Can display both dynamic and static graph,and it is easy to learn.By using computer...

Wednesday, September 07, 2016

CHARACTERISTICS: Can display both dynamic and static graph,and it is easy to learn.By using computer,the CAD file can be converted into program file.Besides,we can program and operate directly on the machine. Integrated rail and unique fine movement mechanism designed to ensure...

Wednesday, September 07, 2016

Quantity : 1000sets - Price : USD1500/set

Portable colorimeter HPC-2 Colorimeter is a portable equipment which can test wavelength, color temperature, chromaticity coordinate, CCT, color rending index, SDCM and etc. Portable colorimeter is widely applied in productions of LED, HID and CFL, and greatly improves the test efficiency...

Wednesday, September 07, 2016

Quantity : 1000sets - Price : USD1500/set

Mandrel Tester Device 1. Introduction Mandrel tester device is designed and manufactured in accordance with the standard requirements of IEC61558 and IEC60065. It is used for the insulating thin layer of the power transformer and supply unit as well as the similar products to do...

Sunday, September 04, 2016

Price : 10,00 €

China professional Compound punching/stamping dies supplier KinsrunThe Metal Stamping Process and TechniquesDies are used in a punch press machine to reshape metal, i.e., coin, punch, form, or bend the part. The stamping process and therefore the type of stamping die is determined...

Sunday, September 04, 2016

Price : 10,00 €

The high quality Automotive stamping dies by Kinsrun a professional mould maker in Shenzhen ChinaThe Metal Stamping Process and TechniquesDies are used in a punch press machine to reshape metal, i.e., coin, punch, form, or bend the part. The stamping process and therefore the type...

Sunday, September 04, 2016

Price : 10,00 €

YZR/YZ Series Hoisting Motor And Crane MotorYZP series of metallurgical and lifting VVVF three-phase asynchronous motor is the system frequency control devices for the power supply control three-phase asynchronous motor with inverter device consisting of The system can achieve variable speed...

Sunday, September 04, 2016

Price : 10,00 €

Details Wire Decoiler with the use of the Spring Machine production of spring, using a combination of control methods of inverter technology and the company's CNC control system control technology, help to improve the accuracy and speed of production of the spring, but also can be...

Sunday, September 04, 2016

Price : 10,00 €

GPS tracking watch ,Website: http://www.sanwat.com,SOS watchbasic infoscreen: 0.66"SIm card: Single micro sim card slotnetwork model: GSMData Service: GPRS2G: GSM 850/900/1800/1900button: one one the watchcolor: Blue, pink,black,yellowSize: 32.5*23*11 mmWeight: 41gOther feature: LBS trackingCPU...

Saturday, September 03, 2016

Price : 10,00 €

Product Description FACTORY DIRECT Fully Automatic Silk Screen Label Printing Machine PVC Conveyor Belt JD-3004 Specifications 1) JD-3004 is printing for all kinds of band soft materials and roll packing materials.2) The machine adopts PVC conveyor belt. For thick ink,sharp solid...

Saturday, September 03, 2016

Price : 10,00 €

Mutiple customize profil aluminum A). Mutiple customize Profil aluminum Description: (1). Alloy Temper: mainly 6000 series, T3-T8 (Other alloy can discuss);(2). Standard: EN755, ASME Y 14.5-2009;(3). Certification: ISO9001: 2008;(4). Surface treatment avaiable: Mill finish; Anodized...

Saturday, September 03, 2016

Price : 10,00 €

Mutiple customize profil aluminum A). Mutiple customize Profil aluminum Description: (1). Alloy Temper: mainly 6000 series, T3-T8 (Other alloy can discuss);(2). Standard: EN755, ASME Y 14.5-2009;(3). Certification: ISO9001: 2008;(4). Surface treatment avaiable: Mill finish; Anodized...

Saturday, September 03, 2016

Price : 10,00 €

male thread thermostatic mixing valveMODEL: DN15M-2With check valveWith check valveIdeal working pressure0.1-0.5MpaCold water inlet temp.4-29 ℃Hot water inlet temp.50-85 ℃Mixed water outlet temp.35-45 ℃ customizedFlow rate11.67L/Min 0.1Mpa pressure differenceTemp accuracy±2℃Body materialNickel...

Thursday, September 01, 2016

AT902 AUTOMATED FILTER TESTER Application: AT902 Automated Filter Tester is a universal tester, development according to the standard of GB2626-2006-6.3, EN 149：2009, it mainly used for detecting the efficiency of the particulate respirator filtration and detecting the filtration...

Thursday, September 01, 2016

AT901-II AUTOMATED FILTER TESTER Application: AT901-II Automated Filter Tester is designed for a stand- alone tester to check a few filters per day or need to integrate your tester in an automated, high-volume, high-volume production line. It has proven track records of durability...

Thursday, September 01, 2016

AT901 AUTOMATED FILTER TESTER Application: AT901 Automated Filter Tester is designed for a stand- alone tester to check a few filters per day or need to integrate your tester in an automated, high-volume, high-volume production line. It has proven track records of durability, reliability...

Thursday, September 01, 2016

AT510 DIFFERENTIAL SCANNING CALORIMETER Main machine Accessories Application: AT510 Differential Scanning Calorimeter is used to determine and research the melting and crystallization process, glass transition temperature, oxidation induction time (OIT), reaction heat, heat enthalpy...

Thursday, September 01, 2016

AT310 Plastic Manholes Mechanical Tester Application: AT310 Plastic Manholes Mechanical Tester is mainly used to do the mechanical properties tests of manholes. Not only does it test the anti-shearing and axial load of manholes base, but it can also test thermoplastic pipe's ring stiffness...