CALLED - 4147 ads

Thursday, March 07, 2024

Wide span shelving racks are very economical, practical and convenient warehouse shelf. Because of its light load, it is often called light duty shelves. The structure of wide span shelving units can be disassembled and assembled by itself, and the height of the floor can be freely...

Wednesday, March 06, 2024

Starting System in Automobile Therefore, the whole process from when the crankshaft starts to rotate under the action of external force to when the engine starts to automatically idling is called starting of the engine. The device required to complete the starting process is called...

Wednesday, March 06, 2024

The vehicle starter can convert the electrical energy of the battery into mechanical energy and drive the engine flywheel to rotate to start the engine. Before the engine can run on its own power, it must be rotated by external force. The process in which the engine transitions from...

Wednesday, March 06, 2024

Price : USD 130 - USD 980

Through big data modeling, simulation optimization and performance verification, harmonic drive actuator company PICEA Motion team realizes the optimal design of tooth profile, breaks through barriers of experience accumulation and correction in transmission design, and continuously...

Wednesday, March 06, 2024

Coated magnets have different coating from ordinary electrodeposited surface treatment,which are known as waterproof magnets The neodymium magnets under this category electroplating have special surface treatment. In addition to ordinary electroplating treatment, they are coated with...

Wednesday, March 06, 2024

AlNiCo Block Magnets Magget Material: AlNiCo Permanent Magnet Magnet Shape: rectangular/block Expression: L (length) x W (width) x H(height) Production Process: Casting and Sintering The Maximum Operating Temperature: 525-550 ° C Advantages: good temperature stability and anti demagnetization...

Wednesday, March 06, 2024

Self Adhesive Neodymium (Rare Earth) NdFeB Disc Magnets These round coin-shaped magnets of different diameter and thickness have an self-adhesive layer attached on one pole. They are classified as 3M self-adhesive backed disc magnets, and the disc magnets are made of neodymium. All...

Wednesday, March 06, 2024

Price : 0.003-50USD

Steel Torsion Spring These springs are a type of torque spring that has two coils separated by a space to minimize friction. These consist of a right-hand and a left-hand coil section connected together and working in parallel. The sections are designed separately with the total torque...

Wednesday, March 06, 2024

Quantity : 10000pcs/p - Price : 20USD--

CNC Turning CNC Turning is also called cnc lathing. The high quality China CNC turning is a manufacturing process in which bars of workpiece are held in place and rotated by the main spindle while a cutting tool is fed to cut the material to create the shape and size as per the drawing's...

Wednesday, March 06, 2024

Quantity : 10000pcs/p - Price : 20USD--

CNC Machining Polycarbonate Polycarbonate (PC) refers to a class of polymers whose macromolecular chains are composed of carbonate-type repeating structural units. It has outstanding impact resistance, good creep resistance and dimensional stability, heat resistance, low water absorption...

Wednesday, March 06, 2024

Quantity : 10000pcs/p - Price : 20USD--

CNC Machining Nylon Nylon is also called polyamide, and its abbreviation is PA. Nylon is a general term for thermoplastic resins containing repeating amide groups [NHCO] in the main chain of the molecule. It is a tough, angular, translucent or milky white crystalline resin. Nylon...

Tuesday, March 05, 2024

Quantity : 1000TONS/M - Price : $5-100/kg

STAINLESS STEEL PIPE/TUBE Stainless steel pipe/tube is one of the most widely used in manufacturing and fabrication. Seamless and welded are the common types of stainless steel tube/pipe, and the difference between those two types is because of the different production procedures...

Tuesday, March 05, 2024

Quantity : 1000TONS/M - Price : $5-100/kg

DUPLEX STEEL PIPE/TUBE As a professional duplex stainless steel flanges manufacturer in China, Yuhong Group provides quality super duplex tubing solutions. The microstructure of duplex stainless steel pipe for sale is approximately 50% ferrite (body-centered cubic structure) and 50%...

Tuesday, March 05, 2024

Size: All size display Resolution: All Interface: HDMI Type: TFT Touch panel: Support Customization: Support HDMI is called High Definition Multimedia Interface, it is one kind of digitalization and voice transmitte interface. Zhunyi teachnology can match HDMI board with RGB, MIPI...

Tuesday, March 05, 2024

CNC Swiss Precision Machining Services CNC Swiss machining is a specialized type of precision machining that involves the use of a sliding headstock lathe to produce intricate parts with high accuracy and tight tolerances. This process is particularly well-suited for small, complex...

Saturday, March 02, 2024

Cylindrical Roller Bearings Cylindrical roller bearings ( also called CRB in short) are a kind of radial rolling bearings with cylindrical rollers. The rollers are lined in parallel shapes, in between the rollers are cages that are able to avoid the leaning of roller or friction between rollers...

Saturday, March 02, 2024

Ball bearings are a part of rolling bearings. As a professional bearing supplier and one of the ball bearing manufacturers in China in China, ZWA has its own ball bearing factory and the business covers home and abroad. Compared with roller bearings, ball bearings are point contact...

Friday, March 01, 2024

Quantity : 700 tons/y - Price : $4-10/kg

PTFE Ring PTFE sealing products not only can seal oil fluid, can also seal water a class of fluids, including strong acid, strong alkali, strong corrosion strong chemical fluids and a variety of solvents, it can also seal a variety of gases, to adapt to dry friction occasions. None...

Friday, March 01, 2024

Price : USD3000-200000

Medical Pipette Tip Mold USM as a medical plastic injection mold supplier provides products including medical device plastic parts, suction tips, blood collection devices, pregnancy test sticks, culture tubes, ventilator masks, etc. All plastic parts which will be used in the medical...

Friday, March 01, 2024

Price : USD3000-200000

gas injection moulding manufacturers gas injection moulding / gas assist injection moulding / gas assist molding gas injection mold / gas injection mould gas assist injection molding design guide Water & Gas Injection Mold Since the thermal conductivity and heat capacity of water...

Friday, March 01, 2024

Grade U1 U2 U3 Stud Link Anchor Chain Common Link also called offshore mooring chain, used for marine industry, mainly used as marine anchor chain, in permanent mooring systems or as a ground chain within a mooring system. Grade U1 U2 U3 stud link anchor chain for sale made of low...

Friday, March 01, 2024

LiFePO4 (Lithium Iron Phosphate) cells are a type of lifepo4 solar rechargeable battery that contains lithium ions instead of the traditional cobalt oxide or manganese oxide. LiFePO4 cells battery provided by our lifepo4 battery manufacturer have a higher energy density and longer...

Friday, March 01, 2024

LiFePO4 (Lithium Iron Phosphate) cells are a type of lifepo4 solar rechargeable battery that contains lithium ions instead of the traditional cobalt oxide or manganese oxide. LiFePO4 cells battery provided by our lifepo4 battery manufacturer have a higher energy density and longer...

Friday, March 01, 2024

LiFePO4 (Lithium Iron Phosphate) cells are a type of lifepo4 solar rechargeable battery that contains lithium ions instead of the traditional cobalt oxide or manganese oxide. LiFePO4 cells battery provided by our lifepo4 battery manufacturer have a higher energy density and longer...

Friday, March 01, 2024

LiFePO4 (Lithium Iron Phosphate) cells are a type of lifepo4 solar rechargeable battery that contains lithium ions instead of the traditional cobalt oxide or manganese oxide. LiFePO4 cells battery provided by our lifepo4 battery manufacturer have a higher energy density and longer...

Friday, March 01, 2024

Price : 100USD

LiFePO4 (Lithium Iron Phosphate) cells are a type of lifepo4 solar rechargeable battery that contains lithium ion instead of the traditional cobalt oxide or manganese oxide. LiFePO4 cells battery provided by our lifepo4 battery manufacturer have a higher energy density and longer...

Friday, March 01, 2024

Ice Cooled Yarn, also called cooling yarn or polyethylene cooling yarn. It's a new material of modified polyethylene, which is a new type of super cold yarn. In hot summer, people pursue a cool and lasting comfort experience. Ice cool yarn can not only achieve excellent contact cold...

Friday, March 01, 2024

Dipped Nylon Fine Denier Tyre Cord Fabrics, is also called as Nylon Low Denier Tyre cord fabric. These low denier dipped nylon tyre cord fabric has the characteristics of high strength, good adhesion with rubber, good fatigue resistance, fabric thickness thin, light weight, light...

Thursday, February 29, 2024

The production of the audi signage mainly adopts the process of blister and electroplating. Goodbong is a manufacturer integrating many equipment and technical talents. It has certain technical insights into acrylic blister electroplating and vacuum coating. The main materials for...

Thursday, February 29, 2024

Model: YVO-072 YVO-270 YVO-480 YVO-600 YVO-720 YVO-1000 Main Parameters: Temperature range: RT+25℃～200℃/300℃/400℃ Vacuum range: normal pressure to 3kpa Temperature fluctuation: ±0.3℃ With vacuum pump Description of Laboratory And industrial Vacuum Oven Vacuum oven is also called...