PROCESSING - 10300 ads

Tuesday, August 09, 2022

Quantity : 200 tons/w

The term aggregate generally refers to all types of sand, gravel and crushed stone, which are used in various construction applications and are the product of mines or quarries. Sand and gravel are used to build roads, sidewalks, buildings, factories, parking lots, walls, roofs...

Tuesday, August 09, 2022

Investment casting, also called the lost-wax casting process, is actually an ancient metal casting technology with a history of over 6,000 years. Investment casting mold generally refers to the mold made with meltable materials (such as wax, plastic, etc.) in very accurate dimensions...

Tuesday, August 09, 2022

Casting process usually refers to the metal casting process, is one of heating processing technologies handled by humans can be found recorded as early as 6,000 years ago. This technology has been attained the prime in China during 1,700 ~ 1,000 B.C, producing the bronze ware mainly at that time...

Saturday, August 06, 2022

Our company develop this wood plastic extrusion line which is fully mixed with raw materials such as PVC, PP, PE and other plastics and plant fibres such as Wood flour, rice husk, straw, and then subjected to plastic processing techniques such as extrusion, moulding, and injection...

Saturday, August 06, 2022

1. Gentle moulding design of SJSZ conical twin screw extruder china guarantees the quality of the matter. 2. Dependable and valid design theory guarantees the dependable operation of extruding. The special big torque drive system, gear tooth and shaft are high-intensity alloy steel...

Saturday, August 06, 2022

ARM Development board based on Rockchip 3128 processor XPI-3128 Geniatech's XPI-3128 is Quad-core Cortex-A7 1.2GHz SOC,it integrat Mali-400MP2 GPU, Excellent arithmetic and graphics processing capabilities, provide high performance video output,smoothly high-resolution (1080p@60fps) display...

Saturday, August 06, 2022

IoT Z Wave USB Dongle UZW100 is a USB2.0 interface Z-Wave Stick, uses Silicon Labs Z-Wave 700 SiP ZGM130S module, ARM 32bit Cortex-M4 architecture with DSP instructions and floating point units for efficient signal processing. Combined with Geniatech's gateway, intelligent controller...

Tuesday, August 02, 2022

Quantity : ＜20pcs - Price : 10-300$

Bt30 Tool Holder product name: BT ER tool holder Brand: HYCNC Material: 20CrMnTi model: BT30/BT40/BT50 Deflection accuracy: ≦0.003mm(Need to cooperate with AA grade collect ） Dynamic balance level: ≦G2.5 -40000rpm With pull stud, dynamic balance correction hardness:...)

Tuesday, August 02, 2022

Digital Centrifuge DM0412 Easy programming to achieve high accuracy of speed control Easy operation with intuitive menu and easy-to-read display Rotor speed can be set and displayed by RPM or G-force Maintenance-free brushless DC motors Key Features of Centrifuge DM0412 Quick spin...

Tuesday, August 02, 2022

Quantity : 30-40sets/ - Price : USD3000-200000

PA66 GF30 Car Parts Plastic Injection Mold If you want to get the product is straight, your mold design and mold processing are also made straight, but there will be a bent product, deformed or the product size is out tolerance, they were caused by material, temperature, shrinkage...

Tuesday, August 02, 2022

Quantity : 30-40sets/ - Price : USD3000-200000

The same type of material of different colors is usually used for two-color injection overmolding（or 2k injection molding）so that the bonding strength of the first color and the second color plastic is the best, but due to the functional requirements of the product, the performance...

Tuesday, August 02, 2022

Quantity : 30-40sets/ - Price : USD3000-200000

Metal Insert Molding Choosing suitable material and molding conditions, not only for products that are easily deformed and damaged (such as glass, coils, electrical parts, etc.), can also be sealed and fixed by material. Choosing a suitable mold structure, the insert product can also...

Tuesday, August 02, 2022

The rubber industry is one of the important basic industries of the national economy. CNC rubber not only provides people with daily-use, medical, and other light industrial rubber products that are indispensable for daily life, but also provides various rubber production equipment...

Tuesday, August 02, 2022

Prototype molds are rapid processing for the molds. It's totally different from production molds as they can't be used in the long term. As a professional mold maker for over 15 years,Packson can handle all kinds of mold including prototypes. We bring not only high skilled engineering...

Tuesday, August 02, 2022

Precision mold components is a process that requires high technique and the use of precision molds and precision machines. The process of precision mould is different from normal injection mold but it still belongs to injection mold. It requires strict tolerance of ±0.01 mm and it...

Tuesday, August 02, 2022

Overmolding mold is made of overmolding injection molding process which is a special injection molding process that can combine various materials into a single part. Through mechanical and/or chemical bonding of two plastic materials, the overmolding injection molding process can...

Tuesday, August 02, 2022

Multi cavity mould is an injection mold that has more than one cavity. The shape of each cavity is the same. Multi cavity mold design is to produce multiples of the same part for high volume production since it means each production will produce a large number of finished parts. Multi...

Tuesday, August 02, 2022

With more than 20 years of experience in clean room injection molding, as the medical silicone molding company in China, we specialize in various clean room injection molding process techniques including medical silicone injection molding and medical grade silicone injection molding...

Tuesday, August 02, 2022

2k injection molding is one type of injection mold. It is also named as two shot molding, double shot molding, double-color mold, Multi-material, or multi-component injection mold. 2k injection molding consists of two different plastic materials and colors. With over 15 years mold...

Tuesday, August 02, 2022

Cellulase products is extracted from choiceness strains by microbial fermentation technology, and advanced post-processing techniques. As a kind of multi-component compound enzyme, cellulase contains several kinds of enzyme with synergistic effect which can catalyze the hydrolysis...

Tuesday, August 02, 2022

Quantity : 9000 - Price : USD10-USD1000000

The main function of drift eliminator in cooling tower is to prevent steam loss. Generally, it is placed above the filler of cooling tower, which can effectively prevent the occurrence of flying water phenomenon, avoid the loss of liquid water, and also avoid the loss of chemicals...

Tuesday, August 02, 2022

Quantity : 9000 - Price : USD10-USD1000000

Cooling tower belt reducer is a kind of deceleration equipment of cooling tower. The outer part of the main body is provided with a corresponding belt groove, the inner hole of the main body adopts a conical structure with a large upper and a small lower, and the inner hole is provided...

Saturday, July 30, 2022

China reflow soldering technology is widely used in the field of electronic manufacturing. The components on the various boards used in our computers are soldered to the circuit board through this process. This PCB china reflow oven machine has a heating circuit inside to heat air or nitrogen...

Friday, July 29, 2022

About Company Qyherb is devoted on the extraction of effective natural ingredients from natural Chinese herbal medicines, and natural plants with 15 years of produce experience. We focus on the natural ingredients and plant extract applied to food, functional products, dietary complement...

Thursday, July 28, 2022

RFL-C30000XZ The Multi-module CW Fiber Lasers developed by Raycus ranges from 3,000W to 30kW, with high electro-optical conversion efficiency, high light beam quality, high energy density, wide modulation frequency, high reliability, long service life, maintenance-free operation and advantages...

Thursday, July 28, 2022

RFL-P20QE The 20-100W Q-Switched Pulse Fiber Laser Series developed by Raycus is the industrial marking and micromachining laser. This series pulse laser has high peak power, high single-pulse energy and optional spot diameter and can be widely applied in the fields, such as marking...

Thursday, July 28, 2022

RFL-A200D Medium powered fiber delivered direct diode laser is mainly used for heat conduction welding with low material thickness. With heat conduction welding, the laser melts the sheets along the intended joint. The melts of the joint partners merge together and then cool off to...

Thursday, July 28, 2022

RFL-C2000 It has the advantages of high electro-optical conversion efficiency, good beam quality, high energy density, wide modulation frequency, strong reliability, long life, and maintenance-free operation. It can be widely used in welding, precision cutting, cladding, surface treatment...

Thursday, July 28, 2022

RFL-C20000TZ The Multi-module CW Fiber Lasers developed by Raycus ranges from 3,000W to 30kW, with high electro-optical conversion efficiency, high light beam quality, high energy density, wide modulation frequency, high reliability, long service life, maintenance-free operation and advantages...

Thursday, July 28, 2022

Wood-plastic composites (WPCs) are composite materials made of wood fiber/wood flour and thermoplastic(s) such as PE, PP, PVC, or PLA. The wood-plastic composite (WPC) product adopts a scientific and efficient production technology and enjoys an extensive technology extension. It...