HEATING - 3715 ads

Wednesday, April 29, 2015

TY turbine oil filtration machine adopts heating, water separating, precise filtering and vacuum dehydration, the capacity between 600 liters and 20000 liters per hour. Meanwhile, the machine also can run on-site. During running of turbines, the lube oil is contaminated easily,...

Thursday, April 23, 2015

Equipped with multi-vessel hollow cathode gun, use tantalum tube inside the hollow cathode effect glow discharge equipped with PID temperature controller, temperature up to 250-400 degrees Operational Principle: Using particle simulation and Monte Carlo (PIC / MCC) method, apply...

Thursday, April 23, 2015

Evaporation ,magnetron series rolling vacuum coating machine are mainly used to do the metal film on the surface on the plastic, cloth ,paper, tinsel. Product category: According to the working principle can be divided into the following categories Resistance heating evaporation...

Thursday, April 23, 2015

Electron beam evaporation has high thermal efficiency, beam density, fast evaporation speed and higher purity comparing with average resistance heating evaporation Operational principle: Material in water-cooled copper crucible, directly using electron beam heating. Electron beam...

Thursday, April 23, 2015

It has high conductivity, visible light transmittance and mechanical semiconductor film hardness and good stability. Operational principle: Taking use of different target basement structure and different target materials, the machine will coat one or more layer of nano film on...

Thursday, April 23, 2015

This equipment mainly used in drill bits, milling cutter, core shaft, blades, precision mould, cutting tools industry, etc. Operational principle: This equipment adopts the vacuum evaporation ion beam technology. This equipment can install two to six different pure metal or alloy...

Thursday, April 23, 2015

This equipment adopts RF frequency technology to make mixed gas and substrate interaction in a certain temperature and vacuum conditions. It formed metal and compound membrane in the substrate surface. Operational principle: This equipment adopts RF frequency technology to make...

Thursday, April 23, 2015

Equipment configuration: Structure type: vertical type or Horizontal type Chamber type: single door or double doors Operational principle: CJHL Series Magnetron Multi-arc Vacuum Coating Machine is integrated by multi-arc ion coating and magnetron sputtering coating deposition technologies...

Thursday, April 23, 2015

1.gear for water-cooling 2.novel design, compact structure, inter-series universal and interchangeable. 3.water-base, good heat dissipation. 4.rolling bearings and transmission gear can add oil . Equipment configuration: Structure type: vertical type or Horizontal type Chamber type...

Thursday, April 23, 2015

Reasonable configuration for the vacuum system. High pumping speed, high efficiency, energy saving, full automatic process controller can be simple, reliable, beautiful. operational Principle : The evaporation material (for example: Aluminum wire) vaporized and evaporated by high...

Thursday, April 23, 2015

K series oil diffusion vacuum pump are the equipment mainly used for getting the high vacuum (10-2 pa – 10-5 pa) condition. It can make the high vacuum pumping system with valves, water-cooled baffle, pipelines, mechanical vacuum pump, etc, Which can generate 10-2 pa --10-4 pa working...

Thursday, April 23, 2015

KT series oil diffusion vacuum pump are the equipment mainly used for getting the high vacuum (10-2 pa – 10-5 pa) condition. It can make the high vacuum pumping system with valves, water-cooled baffle, pipelines, mechanical vacuum pump, etc, Which can generate 10-2 pa--10-4 pa working...

Wednesday, April 22, 2015

Product description: The equipment is widely used in aerospace, aviation, electronics and other industries components dealing. Using double water-cooled, electric lift, bell vertical stainless steel structure,three heating districts adopt Y -connection,type Y connection of three heating...

Wednesday, April 22, 2015

USE: produce the SIC columnar single crystal, THG2 Dia. Size 2 inches. THG3 size is 3 inches. Equipments: Vacuum chamber,vacuum system, pressure regulating,crystal rod movement system,crucible movement system,heating system, air circuit system,cooling system, alarm system,crucible devices...

Wednesday, April 22, 2015

Application: this equipment is mainly composed of a vacuum chamber system, vacuum suction and measurement system, heating and temperature control system, electric control system, pneumatic system and auxiliary system, etc. The equipment is used for device vacuum degassing, annealing...

Wednesday, April 22, 2015

Main technical data of Vacuum thermal resistance furnace Model Effective working dimension (mm) Max temperature (℃) Ultimate pressure (pa) Pressure rising rate (pa/h) Heating power (KW) Working pressure (T) Temperature uniformity (℃) RVY-113 100×100×300 2000 5×10-3 0...

Wednesday, April 22, 2015

Main technical data of Induction vacuum hot-pressing furnace Model Effective Working dimension (mm) Max temperature (℃) Ultimate pressure (Pa) Pressure rising rate (Pa/h) IF power (KW0 IF frequency (HZ) Working Pressure (T) Dimension (m) RVIY-60 200×250 ...)

Wednesday, April 22, 2015

Main technical data of Vacuum induction high-temperature graphite furnace Model Effective working dimension mm(Φ×H) Max temperature(℃) Ultimate pressure (Pa) Pressure rising rate (Pa/h) IF power (KW) IF frequency (HZ) Temperature Uniformity (℃) RVIG-100 200×300...

Wednesday, April 22, 2015

Vacuum single crystal/directional solidification furnace is modern equipment.Under vacuum conditions, it uses medium frequency induction heating to melt the metal or alloy, by a specially designed holding furnace and cooling system making a thermal gradient.Then produce directional...

Wednesday, April 22, 2015

Main technical data of Vacuum bottom loading induction furnace Model Effective working Dimension mm(Φ×H) Max temperature (℃) Ultimate pressure (pa) Pressure rising rate(pa/h) IF power (KW) IF frequency (HZ) Temperature Uniformity(℃) RVIS-160B 500×800 2550 7×10-2 0.67 160...

Wednesday, April 22, 2015

Main technical data of Vacuum pyrolysis furnace Model Effective working dimension mm(Φ×H) Max temperature (℃) Ultimate pressure (Pa) Pressure rising rate (Pa/h) IF power (KW) IF frequency (HZ) Temperature Uniformity (℃) RVIP-80 600×800 1000 5 1.5 160...

Wednesday, April 22, 2015

It is applied for vacuum quenching of high alloy steel such as high-speed tool steel,mould steel,gauge steel and cutlery steel.The machine can achieve in isothermal quenching & multi-grade quenching.With the function of convective heating,it can also be used as annealing and...

Wednesday, April 22, 2015

Main technical data of Vacuum carburizing furnace Model Effective working dimension (mm) Loading capacity (Kg) Max temperature (℃) Ultimate pressure (Pa0 Pressure rising rate (Pa/h0 Heating Power (Kw) Temperature uniformity (℃) Gas Cooling pressure (bar) WZST-223...))

Wednesday, April 22, 2015

Main technical data of of Cycle vacuum induction melting furnace Model Capacity (Kg) Max temperature (℃) Ultimate pressure (Pa) Pressure rising rate (Pa/h) IF power (KW) IF voltage (V) IF frequency (HZ) Dimensions m( L×W×H) RVI-10 10 1850 6×10-3 0.67...

Wednesday, April 22, 2015

Main technical data of Hydrogen vacuum sintering furnace Model Effective working Dimension (mm) Max temperature (℃) Ultimate pressure (pa) Pressure rising rate(pa/h) IF power (KW) IF voltage (V) IF Frequency (HZ) Temperature Uniformity(℃) RHIS-160 350×500 2400 10-1 0.67...

Wednesday, April 22, 2015

Quantity : as ordered - Price : under negotiation

Heatle coil heaters offer a high electrical heating performance in jarious cross-sections and sizes which can be fitted in the tightest of spaces with operating temperatures of up to 750¡ãat the heaters sheath,and hearle coil heaters are always available in various versions and types...

Wednesday, April 22, 2015

Main technical data of Ultra high temperature vacuum induction furnace Model Effective working dimension mm(Φ×H) Max temperature(℃) Ultimate pressure (Pa) Pressure rising rate (Pa/h) IF power (KW) IF frequency (HZ) Temperature Uniformity (℃) RVIS-160 500×800...

Wednesday, April 22, 2015

Main technical data of Horizontal vacuum induction furnace Model Effective working dimension mm(H×W×L) Max temperature (℃) Ultimate pressure (Pa) Pressure rising rate (Pa/h) IF power (KW) IF frequency (HZ) Temperature Uniformity (℃) RVIS-160W 400×400×800 2550...

Wednesday, April 22, 2015

Main technical data of Vacuum silicon carbide sintering furnace Model Effective working dimension mm(Φ×H) Max temperature (℃) Ultimate pressure (Pa) Pressure rising rate (Pa/h) IF power (KW) IF frequency (HZ) Temperature Uniformity (℃) RHIS-160 500×800 2400 7×10-1 1...

Saturday, April 18, 2015

1. The pellet mill china has a vertical die to make feeding vertically which meansn o arching of raw material occers and it is easy for heating dissipation. 2. pellet mill china is fixed while the rollers rotateing. Materials distributed centrifugally and evenly. 3. Double-layer...