Algomtl
svgfair.com
 
ASTM A335 P5 High pressure boiler pipes
Details
China Second hand goods
Second hand goods

ASTM A335 P5 High pressure boiler pipes

Quantity : 1000   Price : 1 000,00 €

ASME SA335 P5,ASTM A335,ASTM A335 P5,High pressure boiler pipes
ASTM A335 P5 is the part of ASTM A335, The pipe shall be suitable for bending, flanging, and similar forming operations, and for fusion welding. The steel material shall conform to chemical composition, tensile property, and hardness requirements.
ASTM A335 P5 alloy steel pipe
The range of ASTM A335 P5 pipe sizes that may be examined by each method shall be subjected to the limitations in the scope of the respective practice.
Each length of pipe shall be subjected to the hydrostatic test. Also, each pipe shall be examined by a non-destructive examination method in accordance to the required practices.
The range of ASTM A335 P5 pipe sizes that may be examined by each method shall be subjected to the limitations in the scope of the respective practice.
The different mechanical test requirements for pipes, namely, transverse or longitudinal tension test, flattening test, and hardness or bend test are presented.Both ends of each crate will indicate the order no., heat no., dimensions, weight and bundles or as requested.
Outer Dimensions: 19.05mm - 114.3mm
Wall Thickness: 2.0mm - 14 mm
Length: max 16000mm
Steel grade: ASTM A335 P5
Packing:
Bare packing/bundle packing/crate packing/wooden protection at the both sides of tubes and suitably protected for sea-worthly delivery or as requested.
Inspection and Test:
Chemical Composition Inspection, Mechanical Properties Test(Tensile Strength,Yield Strength, Elongation, Flaring, Flattening, Bending, Hardness, Impact Test), Surface and Dimension Test,No-destructive Test, Hydrostatic Test.
Surface treatment:
Oil-dip, Varnish, Passivation, Phosphating, Shot Blasting.
Both ends of each crate will indicate the order no., heat no., dimensions, weight and bundles or as requested.
ASTM A335 P5 Chemical Compositions(%)
Compositions Data
UNS Designa-tion K41545
Carbon(max.) 0.15
Manganese 0.30-0.60
Phosphorus(max.) 0.025
Silicon(max.) 0.50
Chromium 4.00-6.00
Molybdenum 0.45-0.65
Other Elements …
Mechanical properties for ASTM A335 P5
Properties Data
Tensile strength, min, (MPa) 415 Mpa
Yield strength, min, (MPa) 205 Mpa
Elongation, min, (%), L/T 30/20
Material & Manufacture
Pipe may be either hot finished or cold drawn with the finishing heat treatment noted below.
Heat Treatment
  • A / N+T
  • N+T / Q+T
  • N+T
Mechanical Tests Specified
  • Transverse or Longitudinal Tension Test and Flattening Test, Hardness Test, or Bend Test
  • For material heat treated in a batch-type furnace, tests shall be made on 5% of the pipe from each treated lot. For small lots, at least one pipe shall be tested.
  • For material heat treated by the continuous process, tests shall be made on a sufficient number of pipe to constitute 5% of the lot, but in no case less than 2 pipe.
Notes for Bend Test:
  • For pipe whose diameter exceeds NPS 25 and whose diameter to wall thickness ratio is 7.0 or less shall be subjected to the bend test instead of the flattening test.
  • Other pipe whose diameter equals or exceeds NPS 10 may be given the bend test in place of the flattening test subject to the approval of the purchaser.
  • The bend test specimens shall be bent at room temperature through 180 without cracking on the outside of the bent portion.

Location : Carretera Siping, Shanghai, 200081, China, Shanghai 闸北,
Contact : Sum Xuu, 862133780199

Good deal: buying from seller

Visit our guide for a secure transaction! Under no circumstances Algomtl can be held responsible for the content of the ads published. Only the sellers and buyers responsability is involved in case of dispute.
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
This page is about importers and exporters of
ASTM A335 P5 High pressure boiler pipes

Search in a category : Second hand goods
Search in a category :
pressure, astm, boiler, a335, pipes, high
Hong Kong 116000 B2B Services
1qc slide gate plate high density

Thursday, December 20, 2018

In order to adapt to different ladle and different production environment, our company has improved the deficiency of traditional sliding mechanism and formed our unique sliding mechanism series and related supporting products based on the actual situation on site Location : 403, D-5 Building...

LIAONING MINERAL & METALLURGY GROUP CO., LTD

  • 116000 - Dalian
  • +8641182557586
Egypt 045 Food
Tomatoes

Tuesday, June 06, 2017

one of our clients "The Egyptian Group for export" located in Behira,Egypt. we are an exporter of Green peas. Tomatoes specifications: Summer lug early: It is grown from late January to early March, according to the weather conditions of varieties Super styrene me, Beto 86, Yossi...

Behira International Trade Point (BITP)

  • 045 - Damanhour
  • +20 4 53 33 18 99
Indonesia 90125 B2B Services
Genuine Printhead Seiko SPT510/50PL

Tuesday, November 19, 2024

Quantity : 100 - Price : 205,00 €

Genuine Printhead Seiko SPT510/50PL Fully equipped with 510 active nozzles for high-resolution (720dpi) and high-speed (50 pl) printing and steel-plate protection for a longer life, this durable printhead lasts 4-5 times longer than many common128 printheads. Specifications: - Technology...

Printpartin

  • 90125 - Makassar
  • +62 4 11 43 75 03
 
Secure payment

Information

Top search