ASTM A335 P22 alloy steel pipe
Quantity : 1000 Price : 1 000,00 €
ASME SA335 P22,ASTM A335,ASTM A335 P22,ASTM A335 P22 alloy pipe
ASTM A335 P22 is the part of ASTM A335, The pipe shall be suitable for bending, flanging, and similar forming operations, and for fusion welding. The steel material shall conform to chemical composition, tensile property, and hardness requirements.
ASTM A335 P22 alloy steel pipe
Each length of pipe shall be subjected to the hydrostatic test. Also, each pipe shall be examined by a non-destructive examination method in accordance to the required practices.
The range of ASTM A335 P22 pipe sizes that may be examined by each method shall be subjected to the limitations in the scope of the respective practice.
The different mechanical test requirements for , namely, transverse or longitudinal tension test, flattening test, and hardness or bend test are presented.Both ends of each crate will indicate the order no., heat no., dimensions, weight and bundles or as requested.
Outer Dimensions: 19.05mm - 114.3mm
Wall Thickness: 2.0mm -14 mm
Length: max 16000mm
Steel grade: ASTM A335 P22
Packing:
Bare packing/bundle packing/crate packing/wooden protection at the both sides of tubes and suitably protected for sea-worthly delivery or as requested.
Inspection and Test:
Chemical Composition Inspection, Mechanical Properties Test(Tensile Strength,Yield Strength, Elongation, Flaring, Flattening, Bending, Hardness, Impact Test), Surface and Dimension Test,No-destructive Test, Hydrostatic Test.
Surface treatment:
Oil-dip, Varnish, Passivation, Phosphating, Shot Blasting.
Both ends of each crate will indicate the order no., heat no., dimensions, weight and bundles or as requested.
ASTM A335 P11 Chemical Compositions(%)
| Compositions | Data |
| UNS Designa-tion | K21590 |
| Carbon | 0.05-0.15 |
| Manganese | 0.30-0.60 |
| Phosphorus(max.) | 0.025 |
| Sulfur(max.) | 0.025 |
| Silicon | 0.50-1.00 |
| Nickel | … |
| Chromium | 1.90-2.60 |
| Molybdenum | 0.87-1.13 |
| Other Elements | … |
Mechanical properties for ASTM A335 P11
| Properties | Data |
| Tensile strength, min, (MPa) | 415 Mpa |
| Yield strength, min, (MPa) | 205 Mpa |
| Elongation, min, (%), L/T | 30/20 |
Material & Manufacture
Pipe may be either hot finished or cold drawn with the finishing heat treatment noted below.Heat Treatment
- A / N+T
- N+T / Q+T
- N+T
Mechanical Tests Specified
- Transverse or Longitudinal Tension Test and Flattening Test, Hardness Test, or Bend Test
- For material heat treated in a batch-type furnace, tests shall be made on 5% of the pipe from each treated lot. For small lots, at least one pipe shall be tested.
- For material heat treated by the continuous process, tests shall be made on a sufficient number of pipe to constitute 5% of the lot, but in no case less than 2 pipe.
Notes for Hardness Test:
- P11 shall not have a hardness not exceeding 250 HB/265 HV [25HRC].
Notes for Bend Test:
- For pipe whose diameter exceeds NPS 25 and whose diameter to wall thickness ratio is 7.0 or less shall be subjected to the bend test instead of the flattening test.
- Other pipe whose diameter equals or exceeds NPS 10 may be given the bend test in place of the flattening test subject to the approval of the purchaser.
- The bend test specimens shall be bent at room temperature through 180 without cracking on the outside of the bent portion.
Location : Carretera Siping, Shanghai, 200081, China, Shanghai 闸北,
Contact : Sum Xuu, 862133780199
Contact : Sum Xuu, 862133780199
Good deal: buying from seller
Visit our guide for a secure transaction! Under no circumstances Algomtl can be held responsible for the content of the ads published. Only the sellers and buyers responsability is involved in case of dispute.
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
|
This page is about importers and exporters of ASTM A335 P22 alloy steel pipe Search in a category : Second hand goods Search in a category : pipe, alloy, steel, astm, a335 |
Armenia 
91761 Everything else / Bulk
91761 Everything else / BulkReport abuse
Saturday, October 10, 2020
ADS Pediatric Dental Chair is specially designed for pediatric dentistry. Pediatric dental office need something professional, our small dental chair makes your office unik, gives people a good image by using a special pediatric dental chair instead of an adult dental chair, kids...
ADS Dental System
- 91761 - CA
- 626 620 0456
France 
467000 Child clothing
467000 Child clothingReport abuse
Friday, April 07, 2023
graphite rod manufacturers / graphite rod suppliers graphite rod factory / graphite rod exporter Graphite graphite rod is a non-metallic product and necessary cutting consumable before welding in the carbon arc gouging cutting process, which is made of carbon and graphite with appropriate...
Pingdingshan Wanhui Graphite Co., LTD
- 467000 - Pingdingshan
- 0375 6506966
- 86 15539792960
Hong Kong 
200000 Craft
200000 CraftReport abuse
Wednesday, December 21, 2022
Acrylic celebrity Aidou standee Acrylic celebrity Aidou standee Acrylic celebrity Aidou standee is a great choice for comic book stores, gift shops, souvenir shops, restaurants, etc. It is also a good business promotion or advertising tool. The acrylic standee with acrylic backboard...
Shenzhen Yizetai Technology Co., Ltd.
- 200000 - shenzhen
- +86 18929304795
