MANUFACTURERS，BREAD - 15835 ads

Wednesday, November 08, 2023

Product Description This neodymium channel magnet has a through hole in the center and it can be fastened at places where the space is limited, but high holding force is needed. NdFeB is strong rare earth mounting magnet and the special construction of the channel enhances its performance...

Wednesday, November 08, 2023

Quantity : 2 million - Price : 0.1-6

Braille Signs Braille sinage is a way of representing text with a series of raised dots allowing blind people to read with their fingers. The six dots that make up Braille translate into letters of the alphabet, numbers, symbols and common words. Braille in public places is a coding...

Wednesday, November 08, 2023

It is suitable for printing paper, paper board, paper cup, high-grade self-adhesive label and so on. Application of flexo label printing machine It is suitable for printing high-grade self-adhesive label, release Liner Label, food label, bottle label, and etc. Application industry...

Wednesday, November 08, 2023

Quantity : 1000000 - Price : $0.2-0.9

Custom commemorative coins are not only popular among coin collectors, but also among companies, organizations and associations. Commemoration with coins is one of the best ways to ensure continuous memory of specific events or occasions. Recognize that corporate anniversaries, achievements...

Wednesday, November 08, 2023

Adult High Pressure Nasal Cannula Pigeon Medical Nasal Cannula are designed to allow for patients with independent breathing and through provid high-flow, warmed, humidified breathing gas to make an effective treatment. Used with humidifier therapy device breathing circuit is available...

Wednesday, November 08, 2023

Minimum Opening Angle 23° Maximum Turning Angle 90° Maximum Temperature 95°C Lever Break Torque ≥12N.m Tightening Torque 8-10N.m Specification of 35D-11 35mm Side-outlet Cartridge with Distributor Pressure VS Average Flow Rate P. (bar) 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 F...

Wednesday, November 08, 2023

Minimum Opening Angle 23° Maximum Turning Angle 100° Maximum Temperature 95°C Lever Break Torque ≥12N.m Tightening Torque 8-10N.m Specification of 35D-10 35mm Side-outlet Cartridge Pressure VS Average Flow Rate P. (bar) 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 F. (I/min) 7.5 10...

Wednesday, November 08, 2023

Minimum Opening Angle 21° Maximum Turning Angle 100° Maximum Temperature 95°C Lever Break Torque ≥6N.m Tightening Torque 6-8N.m Specification of 26H-10 26mm Side-outlet Troque Cartridge Pressure VS Average Flow Rate P. (bar) 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 F. (I/min) 11...

Wednesday, November 08, 2023

Faucet Cartridge for Sale Wanhai not just focus on the life time , but also the balance for each sector : the tighness , movement torque, the pressure resistance and flow rate which bring the final customer better experience with different mixer cartridge types. We are the China's...

Wednesday, November 08, 2023

Price : 2300 USD/Ton--3700 U

Ear loop for surgical face masks are made of spandex and polyester fibers. The Overview of Round Ear Loop Round elastic earloop for surgical face masks are made of spandex and polyester fibers. In the process, no chemicals compounds are added. Polyester and spandex filaments are...

Wednesday, November 08, 2023

Price : 2300 USD/Ton--3700 U

The PE laminated non woven fabric cloth are mostly used for medical and hygiene cloth, personal care, and industrial field. The Overview of PE Laminated Non-Woven Fabric PE laminated non woven fabric which is a bonded and laminated fabrics is produced by using melt PE raw material...

Wednesday, November 08, 2023

Price : 2300 USD/Ton--3700 U

Ear loop for surgical face masks is made of spandex and polyester fibers. The Overview of Flat elastic cord for sale Flat ear loop for surgical face masks are made of spandex and polyester fibers. There are No chemicals are added in the process. The frequently-used width of our flat...

Wednesday, November 08, 2023

Price : 2300 USD/Ton--3700 U

The main materials of ES non woven polyethylene fabric are PP+PE and PET+PE, customers choose different materials according to the product's application. The Overview of ES Non-Woven Fabric The main materials of ES non woven polyethylene are PP+PE and PET+PE, customers choose different...

Wednesday, November 08, 2023

The role of protease in meat products The content of muscle fiber protein and collagen in meat is the main reason that affects the tenderness of meat. After the animal is slaughtered, protease in food acts on the muscle tissues to degrade the muscle fiber protein and collagen through...

Wednesday, November 08, 2023

Quantity : 9000tons - Price : $12~15/kg

TTA28 (Tetra hydroindene dioxide) is a typical cycloaliphatic epoxy resin mixture. As a kind of specialty epoxy resins, its molecular structure is characterized by the saturated double cycloaliphatic epoxy structure without an ester bond, small molecular weight, and extremely low halogen content...

Wednesday, November 08, 2023

Description of Calcium Aluminate Cement Calcium high temperature alumina cement, alumina cements or high alumina cements are obtained by the reaction at high temperature of lime (from limestone) and alumina (contained in natural minerals like bauxite). The aluminate cement obtained...

Wednesday, November 08, 2023

Quantity : 9000tons - Price : $12~15/kg

TTA3150 poly [(2-ethylene epoxide) - 1,2-cyclohexanediol] 2-ethyl-2 - (hydroxymethyl) - 1,3-propylene glycol ether is a typical cycloaliphatic epoxy resin, which contains very little chloride ions and chloride salts. It has the characteristics of high transparency, high heat resistance...

Wednesday, November 08, 2023

What is High Alumina Cement High Alumina Cement (HAC, sometimes known as calcium aluminate cement (CAC) or aluminous cement) is composed of calcium aluminates, unlike Portland cement which is composed of calcium silicates. It is manufactured from limestone or chalk and bauxite. High...

Wednesday, November 08, 2023

Quantity : 9000tons - Price : $12~15/kg

As a typical special glycidyl amine epoxy resin, TTA500 cas 5026-74-4 has the characteristics of low viscosity, low shrinkage, and high-temperature resistance. Its molecular structure contains three epoxy groups and a heat-resistant benzene ring, thus, the cured product has high crosslinking...

Tuesday, November 07, 2023

Cooking or frying oil in restaurants or commercial kitchens and edible oil in food processing factories are vital to ensure high quality fried food. Replacing the oil in all your fryers to keep it fresh is expensive and can be a major contributor to your costs. So that proper care...

Tuesday, November 07, 2023

Portable medical gadgets known as handheld oximeters assess blood oxygen saturation in a rapid and precise manner. In hospitals, clinics, and at home, they are frequently used to keep an eye on blood oxygen levels and heart rate. These tools are simple to use, non-intrusive, and deliver...

Tuesday, November 07, 2023

A contemporary style design, expressing its beauty through lines, shapes, and styles, of whose color-black showing the sense of freshness, health, hope, and life. With a unique loop structure, its surface has moderate hardness and smoothness, comfortable walking, good abrasion resistance...

Tuesday, November 07, 2023

Modern Office Carpet Design A Mid Century Modern design, a strong artistic atmosphere, exquisite and low-key, yet reveals a touch of boldness, paying great attention to the use of color style, of whose color-gray showing the sense of wisdom, rationality. With unique cut structure...

Tuesday, November 07, 2023

Geshem designs and manufactures many kinds of industrial computer products including 10 inch android panel pc. One of Geshem's main product line is Industrial Panel PC China. Its range offers various LFT LED display size from 7” up to 21.5” with 5-wire resistive or capacitive touch screen...

Tuesday, November 07, 2023

SINOFLOC offers an extensive range of organic coagulants such as polyamine, polyDADMAC and decoloring agent. Our products, being the cationic coagulants, could either be used alone or in combination with aluminium base organic flocculant. With our products, the coagulants consumption...

Tuesday, November 07, 2023

Light Cure Tray is a series of light curing resins indicated for making individual trays for impression, temporary base plates for arranging teeth and also bite plates for removable prosthesis adjusting. Technical Features Product Curing time Thickness Working time Flexural...

Tuesday, November 07, 2023

Light Curing Tray is a series of light curing resins indicated for making individual trays for impression, temporary base plates for arranging teeth and also bite plates for removable prosthesis adjusting. Light Curing Tray 1.4mm is specially designed for dental technicians who are...

Tuesday, November 07, 2023

IMPLA IMPLA is definitely a premium tooth line whose anterior teeth are of five-layer effect and posterior teeth are composed of three layers. Advantages Vivid natural teeth outlook with creative shaded layering High performance DCL (Double Cross Linked) material offers excellent...

Saturday, November 04, 2023

Quantity : 20MT

Forged round steel bar is made in cylindrical shape, which can be shaped in direct forging or re-forging into structural parts, bearings and different kinds of components and so on. Main parameters of Forged Round Bar Forged round bar diameter below 600mm Common technical standards...

Saturday, November 04, 2023

Quantity : 20MT

Cold work die steel is mostly used in room temperature with large plastic deformation under serious working stress and harsh working conditions. In combination, the performance of this cold work tool steel grades generally requires high die hardness and wear resistance, sufficient...