120C CABLE CUTTING HEAD FOR - 23611 ads

Saturday, April 18, 2015

Application Property: Compared with the non-armoured power cable, the armoured power cable have some advantage as below : 1. To increase the mechanical strength of the cable, and improve the anti-erosion capacity. 2. It can used in any way installation, and more suitable for directly...

Saturday, April 18, 2015

Application： These cables are intended for drawing into trunking andfixed, protectedconduit. They may also be used inside installations such as lighting fittings, appliances, switchgear andcontrolgear, which are to be used in normal temperature zones. Property: LSOH cables are...

Saturday, April 18, 2015

Application Submarine cables and cables for Offshore Windparks and platform must be resistant to corrosion and abrasion caused by sea currents, waves as well as human and vegatation attack. At the same time they must be capable of offering a maximum of efficiency over long distances...

Saturday, April 18, 2015

Application Directly buried or installed in ducts for 600 volt secondary distribution. ·Cable in Duct(CIC) ·Abrasion Resistant Specification 1. Standards：ASTM B-230, B-231 and ICEA S-66-524, UL Standard 854 for type USE 2. Construction: Concentric stranded or compressed 1350-H19...

Saturday, April 18, 2015

Application Medium Voltage XLPE Insulated power cable is used to transmit and distribute power in power transmission and distribution system of 35kV or lower. It is generally applied to the fields including power, construction, mines, metallurgy, petrochemical industry and communication...

Saturday, April 18, 2015

Application Low Voltage XLPE Insulated power cable is used to transmit and distribute power in power transmission and distribution system of 1kV or lower. It is generally applied to the fields including power, construction, mines, metallurgy, petrochemical industry and communication...

Saturday, April 18, 2015

Application With the characteristics of stable capability, advanced technology, broad material resources, low price, good flexible and easy to lay and maintain, the PVC Insulated and Sheathed Power Cable are suitable to be laid for distribution line with A.C.50HZ and rated voltage up to 1kV...

Saturday, April 18, 2015

1. The pellet mill china has a vertical die to make feeding vertically which meansn o arching of raw material occers and it is easy for heating dissipation. 2. pellet mill china is fixed while the rollers rotateing. Materials distributed centrifugally and evenly. 3. Double-layer...

Saturday, April 18, 2015

Features: 1) X-rays, MRI and CT transparent 2) Quick applying and releasing without hurting patients 3) Special material provides more comfort 4) Can be folded and easy to carry and store 5) Adjustable length to fit different patients 6) Easy to clean 7) Fluid infiltration...

Friday, April 17, 2015

Quantity : 100 - Price : 0,10 €

2 in 1 sync and charging cable USB to iphone6/6s and Micro cable cable length: 150cm can be charging and sync for IPHONE6/6s, Samsung, mobile phone ROHS Location : Four Floor, NO#38 Middle Road of Wen tang, Dong Guan city, Guang Dong Province, 523000 Dong Chen, Contact : Debbie ye...

Friday, April 17, 2015

Quantity : 100 - Price : 0,10 €

Colorful micro retractable cable cable length: 120cm data transfer and charging for mobile phone ROHS Location : Four Floor, NO#38 Middle Road of Wen tang, Dong Guan city, Guang Dong Province, 523000 Dong Chen, Contact : Debbie ye, 86 0769 22016706

Thursday, April 16, 2015

Quantity : 1000 - Price : 0,10 €

2015 newest design USB retractable charging and transmission cable for iphone and Micro USB retractable USB cable Product Features: Material: ABS/TPE(environment material , purified copper wire Current: 2.4A Product specification: cable length 100cm,retractable 140mm*42mm*18mm wire width...)

Thursday, April 16, 2015

Quantity : 1000 - Price : 0,10 €

2015 newest design USB retractable charging and transmission cable for iphone and Micro USB retractable USB cable Product Features: Material: ABS/TPE(environment material , purified copper wire Current: 2.4A Product specification: cable length 100cm,retractable 140mm*42mm*18mm wire width...)

Thursday, April 16, 2015

Quantity : 1set

- Specifications - CE Approved Rotary Screener Can Be Used For Cleaning Raw Materials and Classifying Semi Finished Products After Second Grinding. 1. Three moving modes i.e. circumferential, elliptical and rectilinear are combined, resulting in go od screening effect; 2. Belt...

Thursday, April 16, 2015

Quantity : 1set

- - 1. It has compact structure and small overall dimensions of transect and floor space can be saved re markably; 2. Head: Rubber covering technology is adopted for head pulley to increase friction coefficient and improve the driving efficiency; 3.Height of discharging section...

Thursday, April 16, 2015

Quantity : as you wan - Price : USD0.3-3

The A&Z foam padded medical fractre splint for first aid is built from a thin core of aluminum alloy, sandwiched between two layers of closed-cell foam. Freshly unrolled from storage, the splint is extremely pliable. Bent into any of three simple curves, it becomes extremely...

Wednesday, April 15, 2015

Purpose SYR51+ rebar Location system is used to test rebar diameter, distribution, coating thickness in concrete. Specification JGJ/T152-2008 Performance Longer service life of the Connector Clip: The instrument has long service life because of using Lemo Connector Clip which...

Wednesday, April 15, 2015

Quantity : 100 units - Price : Negotiable

Design －integrated design system －3D CAD / CAM lineup for wide range support of data formats －DFM: review of part design for manufacturability －MoldFlow Analysis －Experienced with design of die casting, silicon vulcanizing, injection (including low pressure inje ction, cloth...)

Wednesday, April 15, 2015

Quantity : 100 units - Price : Negotiable

Design －integrated design system －3D CAD / CAM lineup for wide range support of data formats －DFM: review of part design for manufacturability －MoldFlow Analysis －Experienced with design of die casting, silicon vulcanizing, injection (including low pressure inje ction, cloth...)

Wednesday, April 15, 2015

Quantity : 100 units - Price : Negotiable

Design －integrated design system －3D CAD / CAM lineup for wide range support of data formats －DFM: review of part design for manufacturability －MoldFlow Analysis －Experienced with design of die casting, silicon vulcanizing, injection (including low pressure inje ction, cloth...)

Wednesday, April 15, 2015

Quantity : 100 units - Price : Negotiable

Design －integrated design system －3D CAD / CAM lineup for wide range support of data formats －DFM: review of part design for manufacturability －MoldFlow Analysis －Experienced with design of die casting, silicon vulcanizing, injection (including low pressure inje ction, cloth...)

Wednesday, April 15, 2015

Quantity : 100 units - Price : Negotiable

Design －integrated design system －3D CAD / CAM lineup for wide range support of data formats －DFM: review of part design for manufacturability －MoldFlow Analysis －Experienced with design of die casting, silicon vulcanizing, injection (including low pressure inje ction, cloth...)

Wednesday, April 15, 2015

Quantity : 100 units - Price : Negotiable

Design －integrated design system －3D CAD / CAM lineup for wide range support of data formats －DFM: review of part design for manufacturability －MoldFlow Analysis －Experienced with design of die casting, silicon vulcanizing, injection (including low pressure inje ction, cloth...)

Wednesday, April 15, 2015

Quantity : 100 units - Price : Negotiable

Design －integrated design system －3D CAD / CAM lineup for wide range support of data formats －DFM: review of part design for manufacturability －MoldFlow Analysis －Experienced with design of die casting, silicon vulcanizing, injection (including low pressure inje ction, cloth...)

Wednesday, April 15, 2015

Quantity : 100 units - Price : Negotiable

Design －integrated design system －3D CAD / CAM lineup for wide range support of data formats －DFM: review of part design for manufacturability －MoldFlow Analysis -Experienced with design of die casting, silicon vulcanizing, injection (including low pressure inje ction, cloth...)

Wednesday, April 15, 2015

Quantity : 100 units - Price : Negotiable

Design －integrated design system －3D CAD / CAM lineup for wide range support of data formats －DFM: review of part design for manufacturability －MoldFlow Analysis －Experienced with design of die casting, silicon vulcanizing, injection (including low pressure inje ction, cloth...)

Wednesday, April 15, 2015

Quantity : 100 molds - Price : Negotiable

Design －integrated design system －3D CAD / CAM lineup for wide range support of data formats －DFM: review of part design for manufacturability －MoldFlow Analysis －Experienced with design of die casting, silicon vulcanizing, injection (including low pressure inje ction, cloth...)

Tuesday, April 14, 2015

Quantity : 1000pcs/mo

The lens is designed for Laser engraving machine and Laser markin g machines.High quality at low cost. 1.F-Theta scan lens is widely used in micro material processing , such as drilling, dicing, fine cutting, structuring, perforating, marking and welding. 2. Our high precision...

Tuesday, April 14, 2015

Quantity : 100 units - Price : negotiable

Mold Manufacturing -Equipped with the large capacity of up-to-date machine tools including vertical gantry CNC machinin g-centers, double-head EDM machine tools and spotting presses. -Capable of making big molds with maximum weight 30T -Experienced with low pressure injection...

Tuesday, April 14, 2015

Quantity : 100 units - Price : Negotiable

Mold Manufacturing -Equipped with the large capacity of up-to-date machine tools including vertical gantry CNC machinin g-centers, double-head EDM machine tools and spotting presses. -Capable of making big molds with maximum weight 30T -Experienced with low pressure injection...