BARRELS - 1058 ads

Wednesday, October 25, 2023

PA has good fluidity and is easy to overflow. It is suitable to use a self-locking nozzle and heat it. At the same time, due to the rapid condensation of the melt, it is necessary to prevent the material from blocking the nozzle, runner, gate, etc., causing insufficient products....

Saturday, October 21, 2023

The double-station recycled plastic extruder is twice as efficient as the single-station, and the price of recycled plastic extrusion machine is 3/4 of the two single-stations. Thereby, the efficiency is improved, the customer purchase cost is reduced, the floor area is reduced, and...

Saturday, October 21, 2023

Waste Plastic Recycling Machine Guowang Eco Technology Specializes in Plastic & Textile Recycling Machine Guowang has been paying attention to the reuse of mixed waste plastics for 20 years, and has a relatively deep understanding of mixed waste plastics. Guowang Eco Technology...

Saturday, October 21, 2023

Quantity : 10mg-10t - Price : 50-15000

N-Cyclohexyl-3-aminopropanesulfonic acid is a useful research chemical. CAPS buffer is a buffer solution that can be used as a biological buffer, used in biochemical diagnostic kits, DNA/RNA extraction kits and PCR diagnostic kits, as well as in enzymatic chemistry and HPLC separation...

Monday, October 09, 2023

Ⅰ. ABS Injection Molding Processing Performance (1) Because of the strong moisture absorption as well as high water content of ABS, the plastic parts that are made of ABS have low gloss and poor internal quality. As a result, ABS injection molding should be dried so that the water...

Monday, October 09, 2023

Multiple Band Ligator Set Multi Band Ligators Endoscopic banding has been demonstrated as an effective and simple treatment for internal hemorrhoids. Banding is readily performed in an ambulatory setting and can result in less pain and have a shorter recovery period than surgical...

Wednesday, September 27, 2023

A mould trial is a process by which a new mould is optimised in order to produce the desired products as efficiently as possible. This makes it one of the most important aspects of injection moulding. DETAIL OF TRIAL MOLDING Trial Molding Process Set barrel temperature according to...

Tuesday, September 19, 2023

VZ/VZS Series are the Heavy Duty Industrial Vacuum Cleaners with high pressure, very ideal for sucking/absorbing large mixed particles or chips in continuous applications or installed to centralized extraction units. Parameters of VZ Series – Heavy Duty Industrial Dust Vacuum Cleaner...

Tuesday, September 19, 2023

VILLO VTS series are Single Phase or Three Phase Industrial Vacuum Cleaner with high pressure, very ideal for small space, high precision and continuous applications. Suitable for single phase or three phase working condition. Suitable for the working conditions that require continuous...

Tuesday, September 19, 2023

VX series is an industrial dust vacuum collector with high negative pressure, stable design, small footprint and flexible movement. Parameters of VX Series – Cabinet Type High Pressure Dust Collector Model VX-150 VX-220 VX-300 VX-400 VX-550 VX-750 VX-150F VX-220F VX-300F...

Tuesday, September 19, 2023

VZSB Series are atex approved vacuum cleaners with high pressure, very ideal for sucking/absorbing large mixed particles or chips in continuous applications or installed to centralized extraction systems. Parameters of VZSB Series – ATEX High Pressure Industrial Vacuum Cleaner Model...

Wednesday, September 06, 2023

Roller Bit GREAT has customized manufacture several types of roller bit. Our roller cone drill bit includes the 90 ° U-shaped Roller Bit series and the 120 ° U-shaped Roller Bit series. All these two types have designed Starry Sky Roller Bit. The cones are designed with more full...

Tuesday, September 05, 2023

Quantity : 300sets/mo - Price : 7800-200000USD

With the development of food industry, food deep processing has been paid more and more attention by the world, especially in the birth of instant meals and convenience foods , which has promoted the rapid development of fresh and dehydrated vegetable industry and requires the deep...

Friday, September 01, 2023

Quantity : 5ton/day

Product: hydraulic cylinder end cap Application: hydraulic cylinder Place of origin: Hebei, China (Mainland) Material: C45, 20, ASTM A216 70-36 grade WCB Process: die mold forged, forging + CNC machining, Surface treatment: anti-rust oil or painting Surface roughness: 12.5Ra Weight: 0...

Wednesday, August 30, 2023

Price : 15--60(USD)

As an indispensable necessity in human life, the smart home trash can has been with mankind through every era. With the general improvement of people's environmental awareness and aesthetic level, the types of intelligent trash cans are constantly being renovated, and people pay more...

Wednesday, August 30, 2023

Price : 15--60(USD)

1.Automatic induction opening and closing 2.waterproof 3.Slow start and slow descent 4.5 Seconds countdown 5.Mute,Seal and lock 6.Portable inner barrel Single buckets are widely used in various environments, such as bedrooms, kitchens, bathrooms, living rooms, etc., are used everywhere...

Wednesday, August 30, 2023

Price : 15--60(USD)

1.Compression function, using compression design principle, expand new space and increase capacity 2.430 stainless steel anti-fingerprint and anti-fouling coating 3.Pedal available 4.Mute slow down The anti-fouling and anti-fingerprint stainless steel material effectively avoids the...

Tuesday, August 29, 2023

Kohope has a comprehensive range of Color-Coded, Latex Free polycarbonate syringe. High transparency barrels with a secure Luer-lock tip are available in 1ml, 3ml, 6ml, 10ml, 20ml and 30ml. Polycarbonate Syringe Details Main material of polycarbonate syringes: PC, Isoprene rubber, Silicone oil...

Tuesday, August 29, 2023

The horizontal masterbatch mixer is a horizontal paddle, the blade is made of thick stainless steel, and the distance from the barrel wall is accurately calculated, so that the mixing is rapid and uniform. Equipped with cycloidal pinwheel geared motor, our masterbatch machine low...

Friday, August 25, 2023

The fully automatic one-step plastic film extrusion equipment is our company's patented product. Fully automatic film extrusion equipment: mainly used for processing various mixed plastic film materials to produce products, mixed waste plastic films: household garbage film, plastic...

Friday, August 25, 2023

The waste shredder belongs to the technical field of waste treatment equipment, including a box body, two main shafts arranged side by side and parallel in the box body, several blade groups fixed on the main shaft and arranged at intervals, and a coupling shaft sequentially connected...

Thursday, August 24, 2023

Price : 0.003-50USD

At Atlas metal, we manufacture premium quality custom springs that are used in a variety of applications. Spring types we produce include compression, extension, and torsion springs made from SAE or ASTM grade steel, stainless steel, or copper. Manufacturing capabilities include the...

Tuesday, August 22, 2023

Quantity : 10000000pc - Price : 8-80/pcs

Most of the crawler production operations are completed by rubber vertical injection machines instead of manual labor, reducing the quality instability caused by manual errors. The life of rubber tracks produced by mold-locking vulcanization unit and automatic tensioning steel strip...

Tuesday, August 08, 2023

Price : 2.8-3.2USD

What is plastic injection molding? Plastic Injection molding is a molding method that combines injection and molding. The advantages of plastic small scale injection molding method are fast production speed, high efficiency, operation can be automated, variety of colors, shapes can...

Tuesday, August 08, 2023

Price : 2.8-3.2USD

Plastic Injection Molding Plastic Injection Molding Plastic injection moulding is a method of making plastic products. The molten plastic is injected into the mold by pressure, and then cooled and molded to obtain various plastic parts. There are mechanical injection molding machines...

Saturday, July 29, 2023

silicone moulding process The silicone dousing unit starts in two parts Composed A and composed B pumps one Part A silicone and one Part B silicone via separate hoses to the static mixer. Cylinder A contains the basic material. while cylinder B contains a catalyst. In addition, color...

Saturday, July 29, 2023

Packson's injection molding machines range in capacity from 60-800T, providing a wide range of options for our clients. Our facility includes 40 sets of injection machines, with 9 NISSEI and 14 LSR machines housed in a class 8 clean room to ensure the highest level of cleanliness and quality...

Saturday, July 29, 2023

Multi cavity mould is an injection mold that has more than one cavity. The shape of each cavity is the same. Multi cavity mold design is to produce multiples of the same part for high volume production since it means each production will produce a large number of finished parts. Multi...

Friday, July 28, 2023

Di 2 ethylhexyl phosphate (P204), also known as bis(2-ethylhexyl) phosphate, is an organophosphorus compound with the chemical formula C16H35O4P. It is a colorless to pale yellow liquid that is widely used in various industrial applications. CAS No.: 298-07-7 Molecular formula:...

Friday, July 28, 2023

Quantity : 300m-350m/ - Price : 100USD

The involute shaft is the form of mandrel splines used by all the twin screw extruders over the world. The standards of the spline are Chinese GB standard, German DIN5480 (or DIN5482) and Japanese standard. The design of the involute spline shaft can make the groove depth of the screw larger...