COMPONENT - 12316 ads

Saturday, March 02, 2024

Bearing Double Row The rollers of two-row cylindrical roller bearings are crossing arranged. While rotating, the wave ratio is one time higher than single-row cylindrical roller bearings. However, the vibration ratio decreases 70%. And due to its two-row roller arrangement, compared...

Saturday, March 02, 2024

Cylindrical Roller Thrust Bearing Cylindrical roller thrust bearings consist of rollers, cage components, shaft ring and housing ring. Those components are separable which makes the washing, assembling,disassembling, inspection and maintenance convenient and efficient. They only bear...

Saturday, March 02, 2024

Cylindrical Roller Bearings Cylindrical roller bearings ( also called CRB in short) are a kind of radial rolling bearings with cylindrical rollers. The rollers are lined in parallel shapes, in between the rollers are cages that are able to avoid the leaning of roller or friction between rollers...

Saturday, March 02, 2024

Ball bearings are a part of rolling bearings. As a professional bearing supplier and one of the ball bearing manufacturers in China in China, ZWA has its own ball bearing factory and the business covers home and abroad. Compared with roller bearings, ball bearings are point contact...

Friday, March 01, 2024

Quantity : 700 tons/y - Price : $4-10/kg

PTFE (polytetrafluoroethylene) rods/bars are widely used in industries such as engineering, electronics, and chemical processing, where their exceptional durability, non-stick properties, and ability to withstand harsh environments make them highly sought-after materials. Types of...

Friday, March 01, 2024

Quantity : 700 tons/y - Price : $4-10/kg

As one of the professional PTFE products manufacturers, Jiangsu Xinrui Plastic Technology specializes in manufacturing polytetrafluoroethylene products, including tubes, sheets, rods, gaskets, and film. These PTFE products have excellent chemical and heat resistance, low friction...

Friday, March 01, 2024

Quantity : 700 tons/y - Price : $4-10/kg

PTFE Molded Rods In the field of electronics, PTFE moulded rod is often used in semiconductor manufacturing process chip packaging, electronic components protection and other aspects. Because PTFE molded rod has good high temperature resistance and corrosion resistance, it can improve...

Friday, March 01, 2024

Price : 0-400

The main products of our new energy commercial electric motor control unit system are: main drive motor controller 3-in-1 drive motor controller (main drive + DC/DC + power distribution). We design electric commercial vehicle system solutions to meet the needs of different vehicle models...

Friday, March 01, 2024

Price : 0-400

A DC/DC converter unit for electric vehicles is an electronic device that converts the voltage level of direct current (DC) power from one level to another. It is commonly used in various applications to provide a regulated power supply with different voltage requirements. The dc...

Friday, March 01, 2024

Price : 0-400

Product Features: Adopts liquid-cooled seal waterproof and dust-proof structure, with lower temperature rise than natural cooling and high reliability of the whole machine. Meets ISO26262 ASIL B safety level. Full-function protection: input overvoltage undervoltage, output overvoltage...

Friday, March 01, 2024

Price : 0-400

EMP EV MOBILITY is a leading provider of innovative solutions for electric vehicle parts such as the DCDC Converter unit, onboard charger unit, motor control unit, and CDU combo unit. With our advanced technology and development experience, we deliver high-quality electric car drive...

Friday, March 01, 2024

Price : USD3000-200000

Molding Over Molding & 2k Molding The same type of material of different colors is usually used for two-color injection molding（or 2k injection molding）so that the bonding strength of the first color and the second color plastic is the best, but due to the functional requirements...

Friday, March 01, 2024

Price : USD3000-200000

Medical Pipette Tip Mold USM as a medical plastic injection mold supplier provides products including medical device plastic parts, suction tips, blood collection devices, pregnancy test sticks, culture tubes, ventilator masks, etc. All plastic parts which will be used in the medical...

Friday, March 01, 2024

Price : USD3000-200000

Medical Injection Mold For medical plastic injection molding companies, it means that medical supervisors are required to supervise and manage the materials used to manufacture the equipment, the medical injection molds parts are designed to withstand high temperatures and chemical corrosion...

Friday, March 01, 2024

Price : USD3000-200000

Insert Molding Parts The combination of easy plasticity and elasticity of plastic and rigidity, strength and heat resistance of metal can be firmly made into a complex and exquisite metal-plastic integrated product, it can also reduce product size and weight; The combination of plastic...

Friday, March 01, 2024

The car clutch cylinder, a crucial component in manual transmission vehicles, facilitates clutch engagement and disengagement. When the clutch pedal is pressed, the brake clutch master cylinder uses hydraulic pressure to transfer motion from the pedal to the clutch system, allowing...

Friday, March 01, 2024

Auto brake pads manual are essential components in automotive braking systems. They create friction against the brake rotors when the brake pedal is pressed, causing the vehicle to slow down or stop. Made of friction materials, automobile brake pads endure heat and pressure, ensuring...

Friday, March 01, 2024

A auto brake disc, also known as a auto brake rotor, is a circular component attached to a vehicle's wheel hub, providing you with the reliability and confidence you need on the road. When the brake pads clamp onto its surface, friction is generated, converting kinetic energy into...

Friday, March 01, 2024

A auto brake caliper china is a component in a disc brake system of a vehicle. It houses the brake pads and clamps them against the brake rotor when the brakes are applied. This action creates friction, which slows down and eventually stops the vehicle. Electric brake calipers play...

Friday, March 01, 2024

An automatic vehicle braking system device is a safety technology installed in vehicles that uses sensors and advanced algorithms to detect potential collisions. When a threat is identified and the driver doesn't react in time, the electric car braking system autonomously applies...

Friday, March 01, 2024

Price : 20USD

Aerospace titanium components offer outstanding advantages in lightweight design. The high strength and excellent corrosion resistance of titanium alloys make them widely used in the aerospace industry. Titanium parts reduce aircraft weight, enhance fuel efficiency, and maintain...

Friday, March 01, 2024

Price : 20USD

Advantages of customized stainless steel bolt products: through precise custom processing, stainless steel cnc body bolts have strong corrosion resistance, high strength, excellent reliability and precise matching, ensuring safe and stable connection solutions in various application...

Friday, March 01, 2024

Quickly Installed Heavy-Duty Industrial Flooring The fast loading and heavy-duty industrial floor is made of alloy plastic with physical and chemical properties superior to PVC, which is strictly mixed and produced by various polymer materials in a certain proportion. Its material density...

Thursday, February 29, 2024

Quantity : 200sets、50 - Price : $60~$20,000

The main difficulty of the explosion proof variable frequency drive is the heat dissipation problem. Because all components of the explosion-proof movement frequency converter are installed in the explosion-proof cabinet cavity, air cannot flow, the problem of heat dissipation becomes...

Thursday, February 29, 2024

Quantity : 200sets、50 - Price : $60~$20,000

With the world-leading sensorless current vector control technology (SVC) for synchronous motor, KE300F can accurately identify the motor parameters, dynamically estimate the rotor speed and pole position, and can easily drive all types of permanent magnet synchronous motors (SPM & IPM)...

Thursday, February 29, 2024

Many industrial products are exposed to several atmospherical agents in addition to the well-known temperature, humidity and corrosion. Very high degradation phenomena are caused by sand, dust and rain. In particular, many electrical components have to be permanently water- tight...

Thursday, February 29, 2024

Industrial ovens (also called industrial drying oven china, heating and drying ovens, and industrial heating ovens) are used for drying moisture and curing and baking metal surface coating, components, parts, and finished products, whose temperature can be from 200 ℃ max to 500 ℃ max...

Thursday, February 29, 2024

Model: YPO-6480-300 Main Parameters: Volume: 6480L Inner size: 1.8*2.0*1.8m (w*h*d) Temperature range: RT+25℃～200℃/300℃ Temperature fluctuation: ±0.3℃ Temperature uniformity: ±2％℃ Description of Industrial Drying Oven For Varnish Motors Industrial drying ovens for varnish motors...

Thursday, February 29, 2024

The CapitalBio LuxScan™ 10K microarray gene array scanner is a compact high performance system for microarray imaging and the analysis of DNA, protein, and cell arrays. CapitalBio DNA Microarray Scanner LuxScan™ 10K's advanced systems for optics, signal processing, and motion control...

Thursday, February 29, 2024

Quantity : 80000000 c - Price : US$0.5-US$2

7CF® The product is aerosol all purpose anti rust lubricant that quickly cleans, penetrates, lubricates and protects against corrosion. Anti-rust Lubricant spray stops squeals, loosens rusted parts and displaces moisture. All purpose anti rust lubricant uses can effectively isolate...