TEST - 10666 ads

Saturday, May 18, 2013

Quantity : 10000000t - Price : 900usd

SELL ASTM A387GR911CL2 A387GR2CL1 A387GR11CL1 A387GR91CL2 A387GR22LCL1 A387GR5CL1 STEEL PLATE ASTM A387 Gr 2 CL 2 is a chromium molybdenum alloy steel plate intended primarily for welded boiler and pressure vessels designed of elevated temperature service. The Cr content 0.5% and...

Saturday, May 18, 2013

Quantity : 10000000t - Price : 900usd

SELL ASTM A514GRJ A514GRK A514GRM A514GRP A514GRQ A514GRR A514GRS A514GRS A514GRT STEEP PALTE ASTM A387 Gr 22L CL 1 is a chromium molybdenum alloy steel plate intended primarily for welded boiler and pressure vessels designed of elevated temperature service. The Cr content 2.25 %...

Saturday, May 18, 2013

Quantity : 10000000t - Price : 900usd

SELL ASTM A515GR60 A515GR65 A515GR70 STEEL PLATE ASTM A515 standard specification for pressure vessel plates, carbon steel, for intermediate-and higher-temperature service. 1.STEEL PLATE: A515GR60 A515GR65 A515GR70 2. Supplementary Technology: HIC Test | NACE MR0175 | Z15 | Z25...

Saturday, May 18, 2013

Quantity : 10000000t - Price : 900usd

SELL ASTM A516 GRADE 70|A516 GRADE60|A516 GRADE65 STEEL PLATE ASTM A516 standard specification for pressure vessel plates, carbon steel for moderate and lower- temperature service. ASTM A516 plates 40mm and under in thickness is normally supplied in the as-rolled condition. The...

Saturday, May 18, 2013

Quantity : 10000000t - Price : 900usd

SELL ASTM A517GRA A517GRB A517GRE A517GRF A517GRH A517GRP A517GRQ A517GRS STEEL PLATE ASTM A517 standard specification for pressure vessel plates, alloy steel, high-strength, quenched and tempered. The steel shall be killed and shall conform to the fine austenitic grain size requirement...

Saturday, May 18, 2013

Quantity : 10000000t - Price : 900usd

SELL ASTM A662GRA A662GRB A662GRB A662GRC STEEL PLATE ASTM A662 standard specification for pressure vessel plates, carbon-manganese-silicon steel, for moderate and lower temperature service ASTM A662 plates over 40mm in thickness shall be normalized. Plates of Grades B and C, 40...

Saturday, May 18, 2013

Quantity : 10000000t - Price : 900usd

SELL ASTM A514 Grade J,A514 Grade K,A514 Grade M,A514 Grade P,A514 Grade Q,A514 Grade R,A514 Grade S,A514 Grade S,A514 Grade T STEEP PALTE ASTM A514 standard specification for pressure vessel plates, carbon steel, for intermediate-and higher-temperature service. STEEL PLATE: A514 Grade J...

Saturday, May 18, 2013

Quantity : 10000000t - Price : 900usd

SELL EN S235JR S235J0 S235J2 S355JR S275JR S355J0 S355J2 S355K2 STEEL PLATE 1.STEEL PLATE: S235JR S235J0 S235J2 S355JR S275JR S355J0 S355J2 S355K2 2. Supplementary Technology: HIC Test | NACE MR0175 | Z15 | Z25 | Z35 DIMENTION: Thickness 8mm-300mm, Width: 1500-4020mm, Length...

Saturday, May 18, 2013

Quantity : 10000000t - Price : 900usd

SELL JIS G3103 SB410 SB450 SB480 SB450M SB480M STEEL PLATE JIS G3103 specifies the hot rolled steel plates of carbon steel and molybdenum alloy steel to be used for boilers and pressure vessels, excepting those to be used at room and cold temperatures. This standard covers steel SB410...

Saturday, May 18, 2013

Quantity : 10000000t - Price : 900usd

SELL JIS G3115 SPV235 SPV315 SPV235 SPV410 SPV450 SPV490 STEEL PLATE JIS G3103 specifies the hot rolled steel plates of carbon steel and molybdenum alloy steel to be used for boilers and pressure vessels, excepting those to be used at room and cold temperatures. This standard covers...

Saturday, May 18, 2013

Quantity : 10000000t - Price : 900usd

SELL EN 10028-6 P460QL1 P460QL2 P500Q P500QH P500QL1 P500QL2 STEEL PLATE EN10028-6 P355Q standard specification forWeldable fine grain steels, quenched and tempered . P355QGrade has a good weldable and used in high temperature equipment and pressure vessel. 1. STEEL PLATE: P460QL1...

Saturday, May 18, 2013

Quantity : 10000000t - Price : 900usd

SELL EN 10028-6 P690Q P690QH P690QL1 P690QL2 STEEL PLATE EN10028-6 P355Q standard specification forWeldable fine grain steels, quenched and tempered . P355QGrade has a good weldable and used in high temperature equipment and pressure vessel. 1. STEEL PLATE: P690Q P690QH P690QL1 P690QL2 2...

Friday, May 17, 2013

Quantity : 300 MT - Price : USD3000

Stainless Steel Pipe/Tube 1) Pipe diameter: 6mm-630 mm pipe thickness: 0.8mm-25mm 2) Grade:   304,304L, 316,316L, 321,317L, 310S, 904L and so on. 3) Standards: ASTM/ASME/DIN/JIS and etc 4) Applications range: for use in the petroleum, chemical, medical equipment, boiler heat-exchanger...

Friday, May 17, 2013

Quantity : per ton - Price : USD565

Product name Construction steel bars Standard BS4449 Grade460 , ASTM A615 G60&G40 , JIS SD390, DIN 488-1 500ST ,GB HRB400 Material 20MnSi Diameter 8mm-50mm Length 6m,9m,12m or coil Application Construction industry with all types of reinforced concrete structure etc...

Thursday, May 16, 2013

Quantity : 100 m2 - Price : 35 usd/m2

The stainless steel mesh screen with all microns Materila: SS 202/304/304L/310S/316/316L Weave pattern: plain /twill/ Dutch weave Wire dia: 0.02mm--2.0mm Mesh count: 1---635 mesh/inch Standard roll: 1x30 m/roll Application: Sieving screen, window security screen, cabinet wire mesh...

Thursday, May 16, 2013

Quantity : 1 - Price : 1,00 €

  Low temperature crack resistance of asphalt pavement ability to resist low temperature shrinkage cracks. It has two forms: one is due to the sudden change in temperature caused by the surface layer temperature shrinkage cracking caused by temperature stress exceeds the tensile...

Thursday, May 16, 2013

Quantity : 500 MT/ mo - Price : FOB Shanghai, USD 10

1. Steel Standards: JISG3106, DIN17100, DIN17102, ASTM, EN10025, EN10113, BS4360, ISO630, ISO4950-2, ISO4950-3. 2. Steel Grade: A572Gr60, SM490B, St52-3, S275JR, S355JR, CortenB, SM520, SM570, 15MnV, 16Mn, NR400ZL, S275 (J0, J2, NL), S355 (J0, J2, K2, NL),SM490 (A, B, C),SM490Y (A...)

Thursday, May 16, 2013

Quantity : negotiatio - Price : negotiation

All products in our website are designed and produced by ourselves. Pujiang Dali Iron Chain CO.,LTD was strated in 1990 and has grow through the years by offering high quality iron chains and snow chain. Our products are sold in Europe, American.the Middle East, Southeast Asia.Email...

Thursday, May 16, 2013

Quantity : 200000 set - Price : 10-1000 USD/SET

1.HSZ chain hoist Introduction： HSZ chain hoist is a kind of widely used and porta open air and no electric power works. 2.HSZ chain hoist Parameters： Model HSZ-1/2 HSZ-1 HSZ-1 1/2 HSZ-2 HSZ-3 HSZ-5 HSZ-10 HSZ-20 Capacity t 0.5 1 1.5 2 3 5 10 ...

Thursday, May 16, 2013

Quantity : 200000 set - Price : 10-1000 USD/SET

1.Decription HS-VN chain hoist Introduction： Five features on structural design and usability 1. Safe and reliable in operation with minimum maintenance 2. High efficiency in mechanism, labor saving 3. Light in weight and carry easily 4. Attractive appearance, small in size 5...

Thursday, May 16, 2013

Quantity : 200000 set - Price : 10-1000 USD/SET

1.Introduction： All the cover construction, hooks and chain wheels an make you feel confident in trading. 2. Parameters Capacity t : 0.5-10 Standard lifting m: 2.5-3.5 Hook : 2.0 manganese steel Codition: new KII chain hoist Parameters： Model KII 1/2 KII 1 KII 1 1/2...

Thursday, May 16, 2013

Quantity : 200000 set - Price : 10-1000 USD/SET

1.HS-C chain hoist Introduction： HS-C chain hoist series, derived from HSZ type, is iful and it has higher practicability. 2.HS-C chain hoist Parameters： Model HS-C 1/2 HS-C1 HS-C1 1/2 HS-C2 HS-C3 HS-C5 HS-C10 HS-C20 Capacity t 0.5 1 1.5 2 3 5 10...

Wednesday, May 15, 2013

Quantity : 1 - Price : USD5.96

Series Power Capacitor Rated Voltage Range From 220-1000 VAC Connection 3 phase (1 phase on request) Frequency 50/60 Hz. PowerRange 1-100 Kvar Dielectric Metalized polyprolilene film Protection IP 42 (IP 54 on request) Discharge Resistors Built in...

Wednesday, May 15, 2013

Quantity : 1 - Price : USD5.96

Series Power Factor Capacitor Rated Voltage Range From 220-1000 VAC Connection 3 phase (1 phase on request) Frequency 50/60 Hz. PowerRange 1-100 Kvar Dielectric Metalized polyprolilene film Protection IP 42 (IP 54 on request) Discharge Resistors Built...

Wednesday, May 15, 2013

Quantity : 1 - Price : USD5.96

Series Three Phase Power Capacitor Rated Voltage Range From 220-1000 VAC Connection 3 phase (1 phase on request) Frequency 50/60 Hz. PowerRange 1-100 Kvar Dielectric Metalized polyprolilene film Protection IP 42 (IP 54 on request) Discharge Resistors...

Friday, May 10, 2013

Quantity : 1-1000sets - Price : 2900USD

Laser Engraving Machine SY-1290 Machine Features: 1- Double Red Pointer, Wast collect box 2- With front and back feature for super-long materials processing 3- limit switch for safe processing 4- Separate control system box 5- 12 month warranty for every part of machine, 3 months...

Thursday, May 09, 2013

Quantity : 10000 tons - Price : 750,00 €

Normalised steel plate P460N,pressure vessel steel plate P460N Steel Name: Boiler steel plate,pressure vessel steel plate Main steel grades: P265GH,P355GH,16Mo3,15Mo3,A204 Grade A,A285 Grade 87,A516 Grade 70,A537 Class 1,SPV355,Q345R. Steel standard: EN 10028,DIN 17155,ASME,ASTM...

Thursday, May 09, 2013

Normalized P355GH boiler steel plate Steel Name: Boiler steel plate,pressure vessel steel plate Main steel grades: P265GH,P355GH,16Mo3,15Mo3,A204 Grade A,A285 Grade 16 Grade 70,A537 Class 1,SPV355,Q345R. Steel standard: EN 10028,DIN 17155,ASME,ASTM,JIS,GB713,GB3531 Main application...

Thursday, May 09, 2013

Quantity : 10000 tons - Price : 750,00 €

Boiler steel plate A203 Grade A,SA203 Grade A pressure vessel plate Steel Name: Boiler steel plate,pressure vessel steel plate Main steel grades: P265GH,P355GH,16Mo3,15Mo3,A204 Grade A,A285 Grade 87,A516 Grade 70,A537 Class 1,SPV355,Q345R. Steel standard: EN 10028,DIN 17155,ASME...

Thursday, May 09, 2013

Quantity : 10000 tons - Price : 750,00 €

P690QL2,P690QL2 steel plate,boiler steel plate P690ql2 Steel Name: Boiler steel plate,pressure vessel steel plate Main steel grades: P265GH,P355GH,16Mo3,15Mo3,A204 Grade A,A285 Grade 87,A516 Grade 70,A537 Class 1,SPV355,Q345R. Steel standard: EN 10028,DIN 17155,ASME,ASTM,JIS,GB713...