CHEMICAL - 9010 ads

Tuesday, November 18, 2014

Tundish coating of HN series is characterized by easy painting, no crack, erosion resistance, long service life and easy disassembly. Compared with using the insulation board, the tundish coating series can reduce nonmetallic inclusion in liquid steel, enhance cleanliness of liquid steel...

Tuesday, November 18, 2014

Sliding plate fire clay has characteristics of good bonding and high refractoriness. It is the ideal material for filling sliding aperture. Physical and chemical indexes 牌号Brand HN-1 HN-2 HN-3 Al2O3 % ≥ 65 75 80 Cr2O3 %≥ 1.3 　 2 C %≥ 　 4 4 Location ...

Tuesday, November 18, 2014

Quantity : 2000 tons - Price : 70-400USD per ton

Steel flow initiator is a kind of ladle slid nozzle filler which is successfully developed by our company in recent years, results show that ladle castables success rate of automatic start casting can reach above 95 percent. There is no metallic inclusion in ingot surface, is a kind...

Tuesday, November 18, 2014

Ladle gunning mixer with high grade magnesia, spinel, special binder and additive. It is characterized by good adhesion, high bonding strength, low rebound rate, easy sintering, good corrosion and erosion resistance, and is ideal material for cold and hot repairing mixer and ladle slag line...

Tuesday, November 18, 2014

Ladle permeable well block of chrome corundum and corundum spinel series are characterized by good volume stability, high strength at high temperature, strong erosion resistance to molten steel and good thermal shock resistance. It can be designed and produced integral well block...

Tuesday, November 18, 2014

Alumina-carbon slide gates are characterized by high strength, erosion resistance and good thermal shock resistance. They are preferred products for large/middle ladle and continuous casting tundish. They can meet the needs of different steel grades. Physical and chemical indexes...

Tuesday, November 18, 2014

Ladle nozzle well block series are developed with the newest matrix optimization technology and the theory of the most compact. They are characterized by good thermal shock resistance, strong washout resistance, steady quality and long life etc. Physical and chemical indexes 牌号Brand...

Tuesday, November 18, 2014

Ladle upper/lower nozzle series are developed with the newest matrix optimization technology and the theory of the most compact. They are characterized by good thermal shock resistance, strong washout resistance, steady quality and long life. Physical and chemical indexes Brand...

Tuesday, November 18, 2014

Quantity : 1000 tons - Price : 300USD per ton

Ladle castables using with corundum aluminum magnesia spinel and fused magnesite as raw materials, which is made of micro-power technology and additive agent, are characterized by good construction function, high strength, good volume stability, erosion and washout resistance and...

Tuesday, November 18, 2014

Low carbon magnesia carbon brick using with crystal magnesite, fused corundum, fused spinel, high purity and ultrafine graphite and nano composite antioxidant as raw materials, which are used for ladle slag line. Low carbon and carbon-free corundum spinel bricks are used for ladle...

Tuesday, November 18, 2014

Magnesia alumina carbon bricks, with high grade magnesite, corundum, spinel and graphite as raw materials, bonded by resin, are characterized by good slag resistance. The products are mainly used for ladle upper and lower slag line. Alumina magnesia carbon bricks, with high grade bauxite...

Tuesday, November 18, 2014

Quantity : 600 tons p - Price : 1300USD/ ton

Coil grout is a kind of painting material used for fused alumina recommended for application to the inside face of coreless induction furnace coils. Containing a red color is to distinguish the coil grout from the working lining. This product offers the following benefits and features...

Tuesday, November 18, 2014

The product is characterized by high corrosion and erosion resistance against molten steel and slag, dense sintered layer, long service life, low consumption of per ton steel, easy construction and repairing, and energy saving. Physical and chemical indexes Items Medium Frequency...

Tuesday, November 18, 2014

This company produces the lining material is called “mixed sand” for short. This product is the main refractories of the medium frequency induction furnace used by the small steel enterprises. Its effect is in leading position. Physical and chemical indexes Ingredients SiO2 ...

Tuesday, November 18, 2014

Electric furnace gunning mix with magnesia based and magnesia-calcium based material, binder and sintering agent, is characterized by high bonding strength, strong corrosion resistance and non-spalling. When hot repairing temperature is higher than 1000℃, hot repairing effect is...

Tuesday, November 18, 2014

Electric furnace prefabricated part is characterized by high strength, good thermal shock resistance, corrosion resistance, steady quality and long life, etc. Physical and chemical indexes 牌号Brand DLD-1 DLD-2 化学成分 Chemical composition/%,≥ Al2O3 85 80 Cr­­2O3 2 ...

Tuesday, November 18, 2014

Quantity : 700 tons p

Furnace bottom tapping hole fillers are steel fillers used in steel tapping hole of large eccentric furnace bottom. This product developed by our company is adapted to the need of increasing gradually in large-scale furnace in recent years, an ideal product to replace imported products...

Tuesday, November 18, 2014

Quantity : 500 tons p

Taphole brick is molded at isostatic pressure, with fused magnesia and graphite as raw material. It is characterized by good oxidation resistance, high strength, good corrosion resistance, good integrity, easy replacing and long life and it is ideal material taphole of large and medium furnace...

Tuesday, November 18, 2014

Magnesia carbon brick series used for the electric furnace are made by adoption of fused magnetite, high-purity magnesium sand and graphite as principal raw material, through high-pressure molding and low-temperature treatment. This product is mainly used for electric furnace lining...

Tuesday, November 18, 2014

Quantity : 10000 mete - Price : 150USD--1000USD per

Belt conveyor machine is used for conveying materials, with large transportation capacity, lower power, stable performance and so on, widely used in metallurgy, mining, chemical industry, construction and so on. We have belt width of 500mm, 650mm, 750mm, 800mm, 1000mm, 1200mm,...

Tuesday, November 18, 2014

Quantity : 20 sets pe - Price : 5000--50000

Application: 1.widely applied in mining, road&railway, concrete, chemical and building material industries. 2.Ores and rocks with various hardness 3.Concrete basis and steel structure basis 4.Stationary, half-mobile and mobile applications Working principle of impact crusher...

Tuesday, November 18, 2014

Quantity : 50 unit - Price : 1000--6000USD per un

gold/Copper Flotation Machine can be used to separate nonferrous metal, ferrous metal, heavy metal, nonmetallic mine, chemical material such as gold, copper and recycling minerals. Each chute can inhale gas, sink magma, separate. No assiting equipments are required,and Flotation...

Tuesday, November 18, 2014

Quantity : 1--20 sets - Price : 2000--50000USD per s

Application of vibrating screen: It is widely used for grading and screening materials in the following fields: mines, quarries, aggregate, high-way construction, building materials, chemical industry, metallurgy and so on. Working Principle Of Vbrating Screen: Vibrating screen...

Friday, November 14, 2014

CAS No.: 62-53-3 Other Names: AMINO BENZENE MF: C6H7N EINECS No.: 200-539-3 Place of Origin: Shandong China (Mainland) Purity: 99.9% Appearance: clear to light yellow, oily liquid Odor: Aromatic. Amine like. Taste: Burning. Molecular Weight: 93.13 g/mole Color: Colorless...

Friday, November 14, 2014

Quantity : 500tons - Price : 0.5USD/pc

Brand name: ZICN Country of origin: China Certificate: ISO, ABS, PED,DNV, API,LR,KR, CRN,TS,BV Carbon steel: A234 WPB/WPC/WP11. A420 WPL6 API 5L , A860 WPHY-42/WPHY-46/WPHY-52/WPHY-60/WPHY-65/ WPHY-70 and so on Sizes: 1/2 to 60 inches Thickness: Sch20 to Sch160 XXS Standards...

Friday, November 14, 2014

Quantity : 500tons - Price : 0.5USD/pc

Brand name: ZICN Country of origin: China Certificate: ISO, ABS, PED,DNV, API,LR,KR, CRN,TS,BV Carbon steel: A234 WPB/WPC/WP11. A420 WPL6 API 5L , A860 WPHY-42/WPHY-46/WPHY-52/WPHY-60/WPHY-65/ WPHY-70 and so on Sizes: 1/2 to 60 inches Thickness: Sch20 to Sch160 XXS Standards...

Friday, November 14, 2014

Quantity : 500tons - Price : 0.5USD/pc

Brand name: ZICN Country of origin: China Certificate: ISO, ABS, PED,DNV, API,LR,KR, CRN,TS,BV Carbon steel: A234 WPB/WPC/WP11. A420 WPL6 API 5L , A860 WPHY-42/WPHY-46/WPHY-52/WPHY-60/WPHY-65/ WPHY-70 and so on Sizes: 1/2 to 60 inches Thickness: Sch20 to Sch160 XXS Standards...

Friday, November 14, 2014

Quantity : 500tons - Price : 0.5USD/pc

Brand name: ZICN Country of origin: China Certificate: ISO, ABS, PED,DNV, API,LR,KR, CRN,TS,BV Carbon steel: A234 WPB/WPC/WP11. A420 WPL6 API 5L , A860 WPHY-42/WPHY-46/WPHY-52/WPHY-60/WPHY-65/ WPHY-70 and so on Sizes: 1/2 to 60 inches Thickness: Sch20 to Sch160 XXS Standards...

Tuesday, November 11, 2014

copper wire for saleER70S-6,co2 mig welding wires Shandong Zander Sourcing Company Limited 1.place of orginal: Shandong,China. 2.Brand name: Zander 3.Material: CO2 4.Diameter: 1.0mm 5.Standard: AWSER70S-6 6.Specifications : er70s-6 welding wire ;fast depositing speed;high...

Tuesday, November 11, 2014

Quantity : 3000000KGS - Price : USD0.89 PER KG

Shandong Zander Sourcing Company Limited - place of orginal: Shandong,China. - Brand name: Zander - Material: CO2 - Diameter: 0.8mm - Standard: AWSER70S-6 - Specifications : er70s-6 welding wire ;fast depositing speed;high depositing efficiency ;stable arc Location : No...