STABILITY - 5688 ads

Thursday, March 07, 2024

NCM102Ah 1P6S VDA Module 355 VDA frame welding lithium battery module. High-quality standard of production and performance meeting supply requirements of passenger vehicles. Uninterrupted supply is guaranteed by stable mass production. Continuously improved energy density through...

Wednesday, March 06, 2024

Price : USD 130 - USD 980

Through big data modeling, simulation optimization and performance verification, harmonic drive actuator company PICEA Motion team realizes the optimal design of tooth profile, breaks through barriers of experience accumulation and correction in transmission design, and continuously...

Wednesday, March 06, 2024

AlNiCo Block Magnets Magget Material: AlNiCo Permanent Magnet Magnet Shape: rectangular/block Expression: L (length) x W (width) x H(height) Production Process: Casting and Sintering The Maximum Operating Temperature: 525-550 ° C Advantages: good temperature stability and anti demagnetization...

Wednesday, March 06, 2024

Quantity : 10000pcs/p - Price : 20USD--

CNC Machining POM POM (also known as polyoxymethylene) is a synthetic thermoplastic polymer. It has a good balance between mechanical properties and cost, and is widely used in the manufacture of gears and bearings. POM has excellent wear resistance, low friction coefficient, and...

Wednesday, March 06, 2024

Quantity : 10000pcs/p - Price : 20USD--

CNC Machining Polycarbonate Polycarbonate (PC) refers to a class of polymers whose macromolecular chains are composed of carbonate-type repeating structural units. It has outstanding impact resistance, good creep resistance and dimensional stability, heat resistance, low water absorption...

Wednesday, March 06, 2024

Quantity : 10000pcs/p - Price : 20USD--

CNC Machining PEEK YS RAPID is a professional peek cnc machining manufacturer, peek cnc machining supplier in China. With more than ten years of CNC machining experience, we provide high-quality PEEK material machining services including glass filled china peek cnc machining service...

Wednesday, March 06, 2024

Quantity : 10000pcs/p - Price : 20USD--

CNC Machining Nylon Nylon is also called polyamide, and its abbreviation is PA. Nylon is a general term for thermoplastic resins containing repeating amide groups [NHCO] in the main chain of the molecule. It is a tough, angular, translucent or milky white crystalline resin. Nylon...

Tuesday, March 05, 2024

Titanium rectangular tubing is a hollow metal product made of pure titanium or a titanium alloy. It has a rectangular cross section and is commonly used in various industries, including aerospace, medical, and marine applications, for its exceptional properties such as light weight...

Tuesday, March 05, 2024

PEEK-GL series, is a glass fiber composite modified PEEK glass materials, currently available from 5% -35% of different mass fractions of reinforced materials. Compared with pure resin particles, it has better rigidity, better creep resistance and dimensional stability. Types of...

Tuesday, March 05, 2024

PEEK-FC series modified by PTFE, graphite and carbon fiber have lower friction coefficient, wear resistance and self-lubrication than pure resin G. Types of Grade FC Super Wear Resistant PEEK ZYPEEK Supplier FC Series-330FC30 PEEK Super Wear Resistant FC Series-770FC30/770FE20/770FE20H...

Tuesday, March 05, 2024

peek wire insulation PEEK in Wires & Cables PEEK has outstanding heat aging properties, good flame retardancy, self-extinguishing, hydrolysis resistance, corrosion resistance, stripping resistance, fatigue resistance, radiation resistance, and good electrical insulation, still...

Tuesday, March 05, 2024

Precision Titanium Machining Why is Titanium So Hard to Machine? Titanium, as a challenging material, has a unique combination of properties in terms of high strength, high temperature, chemical reactivity, and elasticity. Due to its strength and tendency to harden during processing...

Tuesday, March 05, 2024

CNC Swiss Precision Machining Services CNC Swiss machining is a specialized type of precision machining that involves the use of a sliding headstock lathe to produce intricate parts with high accuracy and tight tolerances. This process is particularly well-suited for small, complex...

Tuesday, March 05, 2024

Automotive Precision Machining CNC machining technologies are widely used in the automotive industry to manufacture high-quality automotive parts that are both cost-effective and efficient. With over 28 CNC technologies in use, including 5 axis machining, milling and turning, micro...

Saturday, March 02, 2024

A guiding wheel is a component used in many types of movable systems, including elevators, conveyor belts, and industrial machinery. The guiding wheel is responsible for assisting or controlling the movement of the object that the system transports. It ensures that the object moves smoothly...

Saturday, March 02, 2024

Elevator rails are structural elements that support the operation of elevators. They are usually made of steel material and installed in the elevator shaft. The design and manufacturing quality of lift guide rails are directly related to the stability and ride comfort of the elevator...

Saturday, March 02, 2024

Price : $0.1-$9999

A high precision digital potentiometer is an electronic component used to accurately adjust and measure electrical resistance with exceptional precision and stability. These potentiometers typically offer high resolution, low noise, and long-term reliability. They are commonly used...

Saturday, March 02, 2024

Quantity : 200 units/ - Price : $3700-20000

Hydraulic scissor lifters are versatile lifting devices commonly used in various industries and applications. The battery-powered hydraulic lift utilizes hydraulic power to elevate and lower a platform in a straight vertical motion. The hydraulic scissor ramp mechanism consists...

Saturday, March 02, 2024

F-24K Gel Card Incubator F-24K ID Card Incubator is a kind of Thermostat which special making for Blood ID Card or other Reagent card. Combined with Microprocessor technology and PID control, it can keep the temp in 37℃. Apply to the carrier solution of Blood ID Card incubate under...

Saturday, March 02, 2024

Linear Actuator Motion Guideway Accessories Linear guideway accessories are essential components used in conjunction with linear guideways to enhance their performance and ensure smooth and precise linear motion in various industrial applications. These accessories are designed to support...

Saturday, March 02, 2024

Linear Motion (LM) Guide Ways Manufacturer The linear motion guide rail is a mechanical component used to facilitate smooth and precise linear motion, which is manufactured by CSK Company in China. The Linear guides typically consist of a rail and a carriage, with rolling elements...

Friday, March 01, 2024

Quantity : 700 tons/y - Price : $4-10/kg

As one of the professional PTFE products manufacturers, Jiangsu Xinrui Plastic Technology specializes in manufacturing polytetrafluoroethylene products, including tubes, sheets, rods, gaskets, and film. These PTFE products have excellent chemical and heat resistance, low friction...

Friday, March 01, 2024

Quantity : 700 tons/y - Price : $4-10/kg

PTFE Molded Rods In the field of electronics, PTFE moulded rod is often used in semiconductor manufacturing process chip packaging, electronic components protection and other aspects. Because PTFE molded rod has good high temperature resistance and corrosion resistance, it can improve...

Friday, March 01, 2024

Price : 0-400

An ac on board charger unit (OBC) is a device used in electric vehicles (EVs) to convert alternating current (AC) power from the electrical grid into direct current (DC) power to recharge the vehicle's battery pack. The EV OBC is typically located within the vehicle and is integrated...

Friday, March 01, 2024

Price : 0-400

Product Features Adopting APFC and intelligent software switch technology, with high efficiency and good reliability. DC/DC part adopts novel LLC resonant adaptive full soft switch power conversion technology, improving the conversion efficiency of electrical energy. Can work in the...

Friday, March 01, 2024

Price : USD3000-200000

Plastic Household Mould The smart switches and smart sockets of the smart home systems have the same specifications as normal power switches and sockets. Therefore, there is unnecessary to damage the wall, rewire, or buy new electrical equipment. It can replace the original wall switches...

Friday, March 01, 2024

Price : USD3000-200000

Medical Pipette Tip Mold USM as a medical plastic injection mold supplier provides products including medical device plastic parts, suction tips, blood collection devices, pregnancy test sticks, culture tubes, ventilator masks, etc. All plastic parts which will be used in the medical...

Friday, March 01, 2024

Price : USD3000-200000

Insert Mold USM molds focus on structural parts injection molds, water-assisted Gas-assisted injection molds, small parts plastic molds, precision plastic molds, and plastic parts product molds, from mold design to mold manufacturing, mold assembly test molds, product injection molding...

Friday, March 01, 2024

Price : 20USD

Aerospace titanium components offer outstanding advantages in lightweight design. The high strength and excellent corrosion resistance of titanium alloys make them widely used in the aerospace industry. Titanium parts reduce aircraft weight, enhance fuel efficiency, and maintain...

Friday, March 01, 2024

Price : 20USD

Advantages of customized stainless steel bolt products: through precise custom processing, stainless steel cnc body bolts have strong corrosion resistance, high strength, excellent reliability and precise matching, ensuring safe and stable connection solutions in various application...